Windows / Code / 0xc00003ed
0xc00003ed
Decimal: 3221226477 · Signed: -1073740819
As HRESULT:- S: 1 (Failure)
- R: 1 (Reserved, must be clear in a well-formed HRESULT)
- C: 0 (Microsoft-defined)
- N: 0 (Not an NTSTATUS value)
- Facility: 0x000 (FACILITY_NULL: Default)
- Code: 0x03ed (1005)
As NTSTATUS:- Sev: 3 (STATUS_SEVERITY_ERROR)
- C: 0 (Microsoft-defined)
- Facility: 0x000 (Default)
- Code: 0x03ed (1005)
Associated Modules
| Module | Found in | Description |
|---|
| prflbmsg.dll | 1011 | %1005 |
| prflbmsg.dll | 78.1 | Unable to locate the open procedure "%1!s!" in DLL "%2!s!" for the "%3!s!" service. Performance data for this service will not be available. The first four bytes (DWORD) of the Data section contains the error code. |
| scecli.dll | 78.11011 | Some JET database is corrupt. Run esentutl /g to check the integrity of the security database %windir%\security\Database\secedit.sdb. If it is corrupt, attempt a soft recovery first by running esentutl /r in the %windir%\security directory. If soft recovery fails, attempt a repair with esentutl /p on %windir%\security\Database\secedit.sdb. Then delete the log files in %windir%\security.
%1 |
| scesrv.dll | 78.11011 | Some JET database is corrupt. Run esentutl /g to check the integrity of the security database %windir%\security\Database\secedit.sdb. If it is corrupt, attempt a soft recovery first by running esentutl /r in the %windir%\security directory. If soft recovery fails, attempt a repair with esentutl /p on %windir%\security\Database\secedit.sdb. Then delete the log files in %windir%\security.
%1 |
| wer.dll | 78.11011 | Windows cannot access the file %1 for one of the following reasons:
there is a problem with the network connection, the disk that the file is stored on, or the storage
drivers installed on this computer; or the disk is missing.
Windows closed the program %2 because of this error.
Program: %2
File: %1
The error value is listed in the Additional Data section.
User Action
1. Open the file again.
This situation might be a temporary problem that corrects itself when the program runs again.
2.
If the file still cannot be accessed and
- It is on the network,
your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for
further assistance.
Additional Data
Error value: %3
Disk type: %4 |
| 5 entries |
Associated Headers