DBG_RIPEXCEPTION
Code: 0x40010007 (1073807367)
As HRESULT:- S: 0 (Success)
- R: 1 (Reserved, must be clear in a well-formed HRESULT)
- C: 0 (Microsoft-defined)
- N: 0 (Not an NTSTATUS value)
- Facility: 0x001 (FACILITY_RPC: RPC subsystem)
- Code: 0x0007 (7)
- Sev: 1 (STATUS_SEVERITY_INFORMATIONAL)
- C: 0 (Microsoft-defined)
- Facility: 0x001 (FACILITY_DEBUGGER: Windows Debugger)
- Code: 0x0007 (7)
Abstract
Debugger received RIP exception.
Associated Modules
| Module | Code | Found in | Description |
|---|---|---|---|
| SensorsHid.dll | 0x40010007 | 1011 | Failed to update device properties on reconnect. |
| USBHUB3.SYS | 0x40010007 | 1011 | A request for the USB configuration descriptor failed. |
| hidclass.sys | 0x40010007 | 10 | Report was not byte aligned. |
| hidclass.sys | 0x40010007 | 11 | The HID Report Descriptor failed validation. A report was not byte aligned. This typically occurs when there's a problem with the device firmware. Please contact the device or system manufacturer for further assistance. |
| ntdll.dll | 0x40010007 | 78.11011 | Debugger received RIP exception. |
| usbhub.sys | 0x40010007 | 1011 | A request for the USB configuration descriptor failed. |
| 6 entries | |||