arp.exe
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x2710 | 78.11011 | Displays and modifies the IP-to-Physical address translation tables used by address resolution protocol (ARP). ARP -s inet_addr eth_addr [if_addr] ARP -d inet_addr [if_addr] ARP -a [inet_addr] [-N if_addr] [-v] -a Displays current ARP entries by interrogating the current protocol data. If inet_addr is specified, the IP and Physical addresses for only the specified computer are displayed. If more than one network interface uses ARP, entries for each ARP table are displayed. -g Same as -a. -v Displays current ARP entries in verbose mode. All invalid entries and entries on the loop-back interface will be shown. inet_addr Specifies an internet address. -N if_addr Displays the ARP entries for the network interface specified by if_addr. -d Deletes the host specified by inet_addr. inet_addr may be wildcarded with * to delete all hosts. -s Adds the host and associates the Internet address inet_addr with the Physical address eth_addr. The Physical address is given as 6 hexadecimal bytes separated by hyphens. The entry is permanent. eth_addr Specifies a physical address. if_addr If present, this specifies the Internet address of the interface whose address translation table should be modified. If not present, the first applicable interface will be used. Example: > arp -s 157.55.85.212 00-aa-00-62-c6-09 .... Adds a static entry. > arp -a .... Displays the arp table. |
| 0x2711 | 78.11011 | ARP: bad IP address: %2!S!. |
| 0x2712 | 78.11011 | ARP: bad argument: %2!S! |
| 0x2713 | 78.11011 | Interface: %1!S! Internet Address Physical Address Type |
| 0x2714 | 78.11011 | ARP: not enough memory |
| 0x2715 | 78.11011 | other |
| 0x2716 | 78.11011 | invalid |
| 0x2717 | 78.11011 | dynamic |
| 0x2718 | 78.11011 | static |
| 0x2719 | 78.11011 | ARP: Windows Sockets initialization failed: %2!d! |
| 0x271c | 78.11011 | The specified entry was not found. |
| 0x271d | 78.11011 | %1!-20s! %2!-20s! %3!-10s! |
| 0x271e | 78.11011 | The interface failed to initialize: %1 |
| 0x271f | 78.11011 | Unable to retrieve ARP information: %1 |
| 0x2720 | 78.11011 | The ARP entry addition failed: %1 |
| 0x2721 | 78.11011 | The ARP entry deletion failed: %1 |
| 0x2722 | 78.11011 | No ARP Entries Found. |
| 0x2723 | 78.11011 | Unknown - |
| 0x2724 | 78.11011 | IPv4 Protocol is not installed |
| 19 entries | ||