finger.exe
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x2710 | 78.11011 | Unknown host: %1 |
| 0x2711 | 78.11011 | Displays information about a user on a specified system running the Finger service. Output varies based on the remote system. FINGER [-l] [user]@host [...] -l Displays information in long list format. user Specifies the user you want information about. Omit the user parameter to display information about all users on the specifed host. @host Specifies the server on the remote system whose users you want information about. |
| 0x2712 | 78.11011 | tcp/finger: unknown service. |
| 0x2713 | 78.11011 | The network is down. |
| 0x2714 | 78.11011 | [%1] |
| 0x2715 | 78.11011 | Finger: socket:. |
| 0x2716 | 78.11011 | Finger: bind:. |
| 0x2717 | 78.11011 | Finger: connect:. |
| 0x2718 | 78.11011 | Finger: read:. |
| 0x2719 | 78.11011 | Finger: send:. |
| 0x271a | 78.11011 | Finger: WSAStartup:. |
| 0x1 | 78.1 | %1:TLOOK returned %2!d! |
| 0x2 | 78.1 | %1:TLI Error %2!d! |
| 0x3 | 78.1 | poll failed |
| 0x4 | 78.1 | Timeout occurred |
| 0x5 | 78.1 | t_look returned %1!d! |
| 0x6 | 78.1 | The network is down |
| 0x7 | 78.1 | Not super user |
| 0x8 | 78.1 | GATE Table alloc error |
| 0x9 | 78.1 | GATE Table read error |
| 0xa | 78.1 | Smart Gateway: %1 |
| 0xb | 78.1 | Network Address Gateway Address Redirect Life |
| 0xc | 78.1 | %1!d! mins |
| 0xd | 78.1 | %1!ld! mins |
| 0xe | 78.1 | Unable to alloc conn block |
| 0xf | 78.1 | Server port %1!d! in use! |
| 0x10 | 78.1 | Unable to allocate packet |
| 0x11 | 78.1 | %1 packet, foreign host %2, foreign port %3!d!: |
| 0x12 | 78.1 | Contents in hex bytes and characters: |
| 0x13 | 78.1 | Unable to open connection |
| 0x14 | 78.1 | Unable to fork daemon |
| 0x15 | 78.1 | Received bad packet. Length = %1!d! |
| 0x16 | 78.1 | Received bad opcode. Opcode = %1!d! |
| 0x17 | 78.1 | Error on server : %1 |
| 0x18 | 78.1 | Received packet with unexpected block number. Block number = %1!d! |
| 0x19 | 78.1 | Received bad initial opcode. Opcode = %1!d! |
| 0x1a | 78.1 | Bad transfer mode '%1' specified |
| 0x1b | 78.1 | Insufficient buffer space |
| 38 entries | ||