netstat.exe
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x2710 | 10 | Displays protocol statistics and current TCP/IP network connections. NETSTAT [-a] [-b] [-e] [-f] [-n] [-o] [-p proto] [-r] [-s] [-t] [-x] [-y] [interval] -a Displays all connections and listening ports. -b Displays the executable involved in creating each connection or listening port. In some cases well-known executables host multiple independent components, and in these cases the sequence of components involved in creating the connection or listening port is displayed. In this case the executable name is in [] at the bottom, on top is the component it called, and so forth until TCP/IP was reached. Note that this option can be time-consuming and will fail unless you have sufficient permissions. -e Displays Ethernet statistics. This may be combined with the -s option. -f Displays Fully Qualified Domain Names (FQDN) for foreign addresses. -n Displays addresses and port numbers in numerical form. -o Displays the owning process ID associated with each connection. -p proto Shows connections for the protocol specified by proto; proto may be any of: TCP, UDP, TCPv6, or UDPv6. If used with the -s option to display per-protocol statistics, proto may be any of: IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, or UDPv6. -q Displays all connections, listening ports, and bound nonlistening TCP ports. Bound nonlistening ports may or may not be associated with an active connection. -r Displays the routing table. -s Displays per-protocol statistics. By default, statistics are shown for IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, and UDPv6; the -p option may be used to specify a subset of the default. -t Displays the current connection offload state. -x Displays NetworkDirect connections, listeners, and shared endpoints. -y Displays the TCP connection template for all connections. Cannot be combined with the other options. interval Redisplays selected statistics, pausing interval seconds between each display. Press CTRL+C to stop redisplaying statistics. If omitted, netstat will print the current configuration information once. |
| 0x2711 | 78.11011 | %1: bad IP address: %2 |
| 0x2712 | 78.11011 | %1: bad argument: %2 |
| 0x2713 | 78.11011 | Internet Address Physical Address Type Life |
| 0x2714 | 78.11011 | %1: not enough memory |
| 0x2715 | 78.11011 | %1: Windows Sockets initialization failed: %2!u! |
| 0x2716 | 78.11011 | %1: can't load DLL: %2, error = %3!u! |
| 0x2717 | 78.11011 | %1: DLL error %3!u! in %2 |
| 0x2718 | 78.11011 | Interface Statistics Received Sent |
| 0x2719 | 78.11011 | Bytes %1!14u! %2!14u! |
| 0x271a | 78.11011 | Unicast packets %1!14u! %2!14u! |
| 0x271b | 78.11011 | Non-unicast packets %1!14u! %2!14u! |
| 0x271c | 78.11011 | Discards %1!14u! %2!14u! |
| 0x271d | 78.11011 | Errors %1!14u! %2!14u! |
| 0x271e | 78.11011 | Unknown protocols %1!14u! |
| 0x271f | 78.11011 | Interface Index = %1!u! |
| 0x2720 | 78.11011 | Description = %1 |
| 0x2721 | 78.11011 | Type = %1!u! |
| 0x2722 | 78.11011 | Mtu = %1!u! |
| 0x2723 | 78.11011 | Speed = %1!u! |
| 0x2724 | 78.11011 | Physical Address = %1 |
| 0x2725 | 78.11011 | Administrative Status = %1!u! |
| 0x2726 | 78.11011 | Operational Status = %1!u! |
| 0x2727 | 78.11011 | Last Changed = %1!u! |
| 0x2728 | 78.11011 | Output Queue Length = %1!u! |
| 0x2729 | 78.11011 | %1!s! Statistics |
| 0x272a | 78.11011 | Packets Received = %1!u! |
| 0x272b | 78.11011 | Received Header Errors = %1!u! |
| 0x272c | 78.11011 | Received Address Errors = %1!u! |
| 0x272d | 78.11011 | Datagrams Forwarded = %1!u! |
| 0x272e | 78.11011 | Unknown Protocols Received = %1!u! |
| 0x272f | 78.11011 | Received Packets Discarded = %1!u! |
| 0x2730 | 78.11011 | Received Packets Delivered = %1!u! |
| 0x2731 | 78.11011 | Output Requests = %1!u! |
| 0x2732 | 78.11011 | Routing Discards = %1!u! |
| 0x2733 | 78.11011 | Discarded Output Packets = %1!u! |
| 0x2734 | 78.11011 | Output Packet No Route = %1!u! |
| 0x2735 | 78.11011 | Reassembly Required = %1!u! |
| 0x2736 | 78.11011 | Reassembly Successful = %1!u! |
| 0x2737 | 78.11011 | Reassembly Failures = %1!u! |
| 0x2738 | 78.11011 | Datagrams Successfully Fragmented = %1!u! |
| 0x2739 | 78.11011 | Datagrams Failing Fragmentation = %1!u! |
| 0x273a | 78.11011 | Fragments Created = %1!u! |
| 0x273b | 78.11011 | Forwarding = %1!u! |
| 0x273c | 78.11011 | Default Time-To-Live = %1!u! |
| 0x273d | 78.11011 | Reassembly Timeout = %1!u! |
| 0x273e | 78.11011 | TCP Statistics for %1!s! |
| 0x273f | 78.11011 | Active Opens = %1!u! |
| 0x2740 | 78.11011 | Passive Opens = %1!u! |
| 0x2741 | 78.11011 | Failed Connection Attempts = %1!u! |
| 0x2742 | 78.11011 | Reset Connections = %1!u! |
| 0x2743 | 78.11011 | Current Connections = %1!u! |
| 0x2744 | 78.11011 | Segments Received = %1!u! |
| 0x2745 | 78.11011 | Segments Sent = %1!u! |
| 0x2746 | 78.11011 | Segments Retransmitted = %1!u! |
| 0x2747 | 78.11011 | Retransmission Timeout Algorithm = other (1) |
| 0x2748 | 78.11011 | Retransmission Timeout Algorithm = constant (2) |
| 0x2749 | 78.11011 | Retransmission Timeout Algorithm = rsre (3) |
| 0x274a | 78.11011 | Retransmission Timeout Algorithm = vanj (4) |
| 0x274b | 78.11011 | Retransmission Timeout Algorithm = unknown (%1!u!) |
| 0x274c | 78.11011 | Minimum Retransmission Timeout = %1!u! |
| 0x274d | 78.11011 | Maximum Retransmission Timeout = %1!u! |
| 0x274e | 78.11011 | Maximum Number of Connections = %1!u! |
| 0x274f | 78.11011 | Active Connections Proto Local Address Foreign Address State |
| 0x2750 | 78.11011 | %1!-5s! %2!-21s! %3!-21s! %4 |
| 0x2751 | 78.11011 | CLOSED |
| 0x2752 | 78.11011 | LISTENING |
| 0x2753 | 78.11011 | SYN_SENT |
| 0x2754 | 78.11011 | SYN_RECEIVED |
| 0x2755 | 78.11011 | ESTABLISHED |
| 0x2756 | 78.11011 | FIN_WAIT_1 |
| 0x2757 | 78.11011 | FIN_WAIT_2 |
| 0x2758 | 78.11011 | CLOSE_WAIT |
| 0x2759 | 78.11011 | CLOSING |
| 0x275a | 78.11011 | LAST_ACK |
| 0x275b | 78.11011 | TIME_WAIT |
| 0x275c | 78.11011 | TCP |
| 0x275d | 78.11011 | UDP |
| 0x275e | 78.11011 | *:* |
| 0x275f | 78.11011 | UDP Statistics for %1!s! |
| 0x2760 | 78.11011 | Datagrams Received = %1!u! |
| 0x2761 | 78.11011 | No Ports = %1!u! |
| 0x2762 | 78.11011 | Receive Errors = %1!u! |
| 0x2763 | 78.11011 | Datagrams Sent = %1!u! |
| 0x2764 | 78.11011 | ICMPv4 Statistics Received Sent |
| 0x2765 | 78.11011 | Messages %1!-10u! %2!-10u! |
| 0x2766 | 78.11011 | Errors %1!-10u! %2!-10u! |
| 0x2767 | 78.11011 | Destination Unreachable %1!-10u! %2!-10u! |
| 0x2768 | 78.11011 | Time Exceeded %1!-10u! %2!-10u! |
| 0x2769 | 78.11011 | Parameter Problems %1!-10u! %2!-10u! |
| 0x276a | 78.11011 | Source Quenches %1!-10u! %2!-10u! |
| 0x276b | 78.11011 | Redirects %1!-10u! %2!-10u! |
| 0x276c | 78.11011 | Echos %1!-10u! %2!-10u! |
| 0x276d | 78.11011 | Echo Replies %1!-10u! %2!-10u! |
| 0x276e | 78.11011 | Timestamps %1!-10u! %2!-10u! |
| 0x276f | 78.11011 | Timestamp Replies %1!-10u! %2!-10u! |
| 0x2770 | 78.11011 | Address Masks %1!-10u! %2!-10u! |
| 0x2771 | 78.11011 | Address Mask Replies %1!-10u! %2!-10u! |
| 0x2773 | 78.11011 | The interface initialization failed: %1!u! |
| 0x2774 | 78.11011 | Failed to open handle to TCP |
| 0x2775 | 78.11011 | Connection Limit Table IPAddress Time Remaining (Secs) |
| 0x2776 | 78.11011 | InUse %1!4u! Available %2!4u! |
| 0x2777 | 78.11011 | Unable to allocate memory for Connection Limit Query Buffer |
| 0x2778 | 78.11011 | Active Connections Proto Local Address Foreign Address State PID |
| 0x2779 | 78.11011 | %1!-5s! %2!-21s! %3!-21s! %4!-12s! %5!u! |
| 0x277a | 78.11011 | IPv4 |
| 0x277b | 78.11011 | IPv6 |
| 0x277c | 78.11011 | Packet Too Big %1!-10u! %2!-10u! |
| 0x277d | 78.11011 | MLD Queries %1!-10u! %2!-10u! |
| 0x277e | 78.11011 | MLD Reports %1!-10u! %2!-10u! |
| 0x277f | 78.11011 | MLD Dones %1!-10u! %2!-10u! |
| 0x2780 | 78.11011 | Router Solicitations %1!-10u! %2!-10u! |
| 0x2781 | 78.11011 | Router Advertisements %1!-10u! %2!-10u! |
| 0x2782 | 78.11011 | Neighbor Solicitations %1!-10u! %2!-10u! |
| 0x2783 | 78.11011 | Neighbor Advertisements %1!-10u! %2!-10u! |
| 0x2784 | 78.11011 | Router Renumberings %1!-10u! %2!-10u! |
| 0x2785 | 78.11011 | Type %1!-3u! %1!-10u! %2!-10u! |
| 0x2786 | 78.11011 | ICMPv6 Statistics Received Sent |
| 0x2787 | 78.11011 | Active Connections Proto Local Address Foreign Address State Offload State |
| 0x2788 | 78.11011 | %1!-5s! %2!-21s! %3!-21s! %4!-12s! %5!-12s! |
| 0x2789 | 78.11011 | InHost |
| 0x278a | 78.11011 | Offloading |
| 0x278b | 78.11011 | Offloaded |
| 0x278c | 78.11011 | Uploading |
| 0x278d | 78.11011 | Active Connections Proto Local Address Foreign Address State PID Offload State |
| 0x278e | 78.11011 | %1!-5s! %2!-21s! %3!-21s! %4!-12s! %5!u! %6!-12s! |
| 0x278f | 78.11011 | Can not obtain ownership information |
| 0x2790 | 78.11011 | [System] |
| 0x2791 | 78.11011 | -- unknown component(s) -- |
| 0x2792 | 78.11011 | %1!s! |
| 0x2793 | 8.11011 | [%1!s!] |
| 0x2794 | 8.11011 | Active NetworkDirect Connections, Listeners, SharedEndpoints Mode IfIndex Type Local Address Foreign Address PID |
| 0x2795 | 8.11011 | %1!-6s! %2!6u! %3!-14s! %4!-21s! %5!-21s! %6!u! |
| 0x2796 | 8.11011 | [TCP mapping] %1!-21s! %2!-21s! |
| 0x2797 | 8.11011 | User |
| 0x2798 | 8.11011 | Kernel |
| 0x2799 | 8.11011 | Connection |
| 0x279a | 8.11011 | Listener |
| 0x279b | 8.11011 | SharedEndpoint |
| 0x279c | 8.11011 | NA |
| 0x279d | 8.11011 | Internet |
| 0x279e | 8.11011 | Datacenter |
| 0x279f | 8.11011 | DatacenterCustom |
| 0x27a0 | 8.11011 | Compat |
| 0x27a1 | 8.11011 | Not Applicable |
| 0x27a2 | 8.11011 | Active Connections Proto Local Address Foreign Address State Template |
| 0x27a3 | 8.11011 | %1!-5s! %2!-21s! %3!-21s! %4!-12s! %5!-14s! |
| 0x27a4 | 8.11011 | InternetCustom |
| 0x27a5 | 1011 | BOUND |
| 0x2710 | 11 | Displays protocol statistics and current TCP/IP network connections. NETSTAT [-a] [-b] [-e] [-f] [-i] [-n] [-o] [-p proto] [-r] [-s] [-t] [-x] [-y] [interval] -a Displays all connections and listening ports. -b Displays the executable involved in creating each connection or listening port. In some cases well-known executables host multiple independent components, and in these cases the sequence of components involved in creating the connection or listening port is displayed. In this case the executable name is in [] at the bottom, on top is the component it called, and so forth until TCP/IP was reached. Note that this option can be time-consuming and will fail unless you have sufficient permissions. -c Displays a list of processes sorted by the number of TCP or UDP ports currently consumed. -d Displays DSCP value assocated with each connection. -e Displays Ethernet statistics. This may be combined with the -s option. -f Displays Fully Qualified Domain Names (FQDN) for foreign addresses. -i Displays the time spent by a TCP connection in its current state. -n Displays addresses and port numbers in numerical form. -o Displays the owning process ID associated with each connection. -p proto Shows connections for the protocol specified by proto; proto may be any of: TCP, UDP, TCPv6, or UDPv6. If used with the -s option to display per-protocol statistics, proto may be any of: IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, or UDPv6. -q Displays all connections, listening ports, and bound nonlistening TCP ports. Bound nonlistening ports may or may not be associated with an active connection. -r Displays the routing table. -s Displays per-protocol statistics. By default, statistics are shown for IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, and UDPv6; the -p option may be used to specify a subset of the default. -t Displays the current connection offload state. -x Displays NetworkDirect connections, listeners, and shared endpoints. -y Displays the TCP connection template for all connections. Cannot be combined with the other options. interval Redisplays selected statistics, pausing interval seconds between each display. Press CTRL+C to stop redisplaying statistics. If omitted, netstat will print the current configuration information once. |
| 0x27a6 | 11 | Active Connections Proto Local Address Foreign Address State Time in State (ms) |
| 0x27a7 | 11 | %1!-5s! %2!-21s! %3!-21s! %4!-12s! %5!u! |
| 0x27a8 | 11 | Active Connections Proto Local Address Foreign Address State PID Time in State (ms) |
| 0x27a9 | 11 | %1!-5s! %2!-21s! %3!-21s! %4!-12s! %5!u! %6!u! |
| 0x27aa | 11 | Port Consumption Proto PID NumberOfPorts |
| 0x27ab | 11 | %1!-5s! %2!-8u! %3!u! |
| 0x27ac | 11 | Active Connections Proto Local Address Foreign Address State DSCP Value |
| 0x27ad | 11 | %1!-5s! %2!-21s! %3!-21s! %4!-12s! %5!u! |
| 0x2710 | 7 | Displays protocol statistics and current TCP/IP network connections. NETSTAT [-a] [-b] [-e] [-f] [-n] [-o] [-p proto] [-r] [-s] [-t] [interval] -a Displays all connections and listening ports. -b Displays the executable involved in creating each connection or listening port. In some cases well-known executables host multiple independent components, and in these cases the sequence of components involved in creating the connection or listening port is displayed. In this case the executable name is in [] at the bottom, on top is the component it called, and so forth until TCP/IP was reached. Note that this option can be time-consuming and will fail unless you have sufficient permissions. -e Displays Ethernet statistics. This may be combined with the -s option. -f Displays Fully Qualified Domain Names (FQDN) for foreign addresses. -n Displays addresses and port numbers in numerical form. -o Displays the owning process ID associated with each connection. -p proto Shows connections for the protocol specified by proto; proto may be any of: TCP, UDP, TCPv6, or UDPv6. If used with the -s option to display per-protocol statistics, proto may be any of: IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, or UDPv6. -r Displays the routing table. -s Displays per-protocol statistics. By default, statistics are shown for IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, and UDPv6; the -p option may be used to specify a subset of the default. -t Displays the current connection offload state. interval Redisplays selected statistics, pausing interval seconds between each display. Press CTRL+C to stop redisplaying statistics. If omitted, netstat will print the current configuration information once. |
| 0x2793 | 7 | [%1!S!] |
| 0x2710 | 8.1 | Displays protocol statistics and current TCP/IP network connections. NETSTAT [-a] [-b] [-e] [-f] [-n] [-o] [-p proto] [-r] [-s] [-x] [-t] [interval] -a Displays all connections and listening ports. -b Displays the executable involved in creating each connection or listening port. In some cases well-known executables host multiple independent components, and in these cases the sequence of components involved in creating the connection or listening port is displayed. In this case the executable name is in [] at the bottom, on top is the component it called, and so forth until TCP/IP was reached. Note that this option can be time-consuming and will fail unless you have sufficient permissions. -e Displays Ethernet statistics. This may be combined with the -s option. -f Displays Fully Qualified Domain Names (FQDN) for foreign addresses. -n Displays addresses and port numbers in numerical form. -o Displays the owning process ID associated with each connection. -p proto Shows connections for the protocol specified by proto; proto may be any of: TCP, UDP, TCPv6, or UDPv6. If used with the -s option to display per-protocol statistics, proto may be any of: IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, or UDPv6. -r Displays the routing table. -s Displays per-protocol statistics. By default, statistics are shown for IP, IPv6, ICMP, ICMPv6, TCP, TCPv6, UDP, and UDPv6; the -p option may be used to specify a subset of the default. -t Displays the current connection offload state. -x Displays NetworkDirect connections, listeners, and shared endpoints. -y Displays the TCP connection template for all connections. Cannot be combined with the other options. interval Redisplays selected statistics, pausing interval seconds between each display. Press CTRL+C to stop redisplaying statistics. If omitted, netstat will print the current configuration information once. |
| 161 entries | ||