pathping.exe
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x2710 | 8.11011 | [%1] |
| 0x2711 | 78.11011 | %1!4lu! ms |
| 0x2712 | 78.11011 | <1 ms |
| 0x2713 | 78.11011 | Usage: pathping [-g host-list] [-h maximum_hops] [-i address] [-n] [-p period] [-q num_queries] [-w timeout] [-4] [-6] target_name Options: -g host-list Loose source route along host-list. -h maximum_hops Maximum number of hops to search for target. -i address Use the specified source address. -n Do not resolve addresses to hostnames. -p period Wait period milliseconds between pings. -q num_queries Number of queries per hop. -w timeout Wait timeout milliseconds for each reply. -4 Force using IPv4. -6 Force using IPv6. |
| 0x2714 | 8.11011 | Unable to resolve target system name %1. |
| 0x2715 | 78.11011 | Unable to contact IP driver. Error code %1!d!. |
| 0x2716 | 8.11011 | Tracing route to %1 [%2] over a maximum of %3!u! hops: |
| 0x2717 | 78.11011 | %1!3lu! |
| 0x2718 | 78.11011 | No information available. |
| 0x2719 | 78.11011 | reports: |
| 0x271a | 78.11011 | Transmit error: code %1!lu!. |
| 0x271b | 78.11011 | Trace complete. |
| 0x271c | 8.11011 | Invalid source address %1. |
| 0x271f | 78.11011 | General failure. |
| 0x2720 | 78.11011 | Destination net unreachable. |
| 0x2721 | 78.11011 | Destination host unreachable. |
| 0x2722 | 78.11011 | Destination protocol unreachable. |
| 0x2723 | 78.11011 | Destination protocol unreachable. |
| 0x2724 | 78.11011 | No resources. |
| 0x2725 | 78.11011 | One of the IP options is invalid. |
| 0x2726 | 78.11011 | Hardware error. |
| 0x2727 | 78.11011 | Packet needs to be fragmented but DF flag is set. |
| 0x2728 | 78.11011 | Request timed out. |
| 0x2729 | 78.11011 | General failure. |
| 0x272a | 78.11011 | Invalid source route specified. |
| 0x272b | 78.11011 | TTL expired in transit. |
| 0x272c | 78.11011 | TTL expired during reassembly. |
| 0x272d | 78.11011 | IP parameter problem. |
| 0x272e | 78.11011 | Source quench received. |
| 0x272f | 78.11011 | The specified option is too large. |
| 0x2730 | 78.11011 | The destination specified is not valid. |
| 0x2731 | 78.11011 | General failure. |
| 0x2732 | 78.11011 | Unable to initialize the Windows Sockets interface, error code %1!d!. |
| 0x2733 | 8.11011 | Tracing route to %1 over a maximum of %2!u! hops |
| 0x2734 | 8.11011 | A value must be supplied for option %1. |
| 0x2735 | 8.11011 | Bad value for option %1. |
| 0x2736 | 8.11011 | %1 is not a valid source route address. |
| 0x2737 | 78.11011 | Too many options have been specified. |
| 0x2738 | 8.11011 | %1 is not a valid command option. |
| 0x2739 | 78.11011 | A target name or address must be specified. |
| 0x273a | 8.11011 | %1 |
| 0x273b | 78.11011 | * |
| 0x273c | 78.11011 | |
| 0x273d | 8.11011 | %1 |
| 0x273e | 78.11011 | Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 |
| 0x273f | 78.11011 | %1!4d!/%2!4d! =%3!3d!% | |
| 0x2740 | 78.11011 | %1!4d!/%2!4d! =%3!3d!% |
| 0x2741 | 78.11011 | %1!3d! %2!4d!ms |
| 0x2742 | 78.11011 | %1!3d! --- |
| 0x2743 | 78.11011 | Computing statistics for %1!d! seconds... |
| 0x2744 | 78.11011 | Negotiating IP Security. |
| 0x2745 | 78.11011 | Cound not create an Event object. Error code is %1!d!. |
| 0x2746 | 78.11011 | Cound not create a socket object. Error code is %1!d!. |
| 0x2747 | 78.11011 | Cound not associate the event object with network events. Error code is %1!d!. |
| 0x2748 | 78.11011 | Could not send the packet. Error code is %1!d!. |
| 0x2749 | 78.11011 | Could not receive a packet. Error code is %1!d!. |
| 0x275c | 8.11011 | The option %1 is only supported for %2. |
| 0x2710 | 7 | [%1!hs!] |
| 0x2714 | 7 | Unable to resolve target system name %1!hs!. |
| 0x2716 | 7 | Tracing route to %1!hs! [%2!hs!] over a maximum of %3!u! hops: |
| 0x271c | 7 | Invalid source address %1!s!. |
| 0x2733 | 7 | Tracing route to %1!hs! over a maximum of %2!u! hops |
| 0x2734 | 7 | A value must be supplied for option %1!hs!. |
| 0x2735 | 7 | Bad value for option %1!hs!. |
| 0x2736 | 7 | %1!hs! is not a valid source route address. |
| 0x2738 | 7 | %1!hs! is not a valid command option. |
| 0x273a | 7 | %1!hs! |
| 0x273d | 7 | %1!hs! |
| 0x275c | 7 | The option %1!s! is only supported for %2!hs!. |
| 69 entries | ||