Windows / Modules / tpm.sys

tpm.sys

Associated Error Codes

Below lists error codes and symbolic names found for this module.

CodeFound inDescription
0x21011The TPM self test command failed.
0xc1011The device driver for the Trusted Platform Module (TPM) encountered an error in the TPM hardware, which might prevent some applications using TPM services from operating correctly. Please restart your computer to reset the TPM hardware. For further assistance on this hardware issue, please contact the computer manufacturer for more information.
0xe1011The device driver for the Trusted Platform Module (TPM) encountered a non-recoverable error in the TPM hardware, which prevents TPM services (such as data encryption) from being used. For further help, please contact the computer manufacturer.
0xf1011The device driver for the Trusted Platform Module (TPM) encountered a non-recoverable error in the TPM hardware, which prevents TPM services (such as data encryption) from being used. For further help, please contact the computer manufacturer.
0x101011A compatible TPM is not found.
0x111011The Trusted Platform Module (TPM) hardware failed to execute a TPM command.
0x121011This event triggers the Trusted Platform Module (TPM) provisioning/status check to run.
0x131011The system firmware failed to enable overwriting of system memory on restart. The ACPI request could not be interpreted by the firmware. The firmware should be upgraded.
0x141011A command was sent to the Trusted Platform Module (TPM) successfully resetting the TPM lockout logic. This event is generated when a successful command sent to the TPM resets the TPM lockout logic. With this event, all prior standard user TPM authorization failures are ignored; allowing standard users to use the TPM normally again immediately.
0x151011A standard user issued Trusted Platform Module (TPM) command returned an authorization failure. This event is generated when a command sent to the TPM by a standard user returns a response indicating an authorization failure. If too many authorization failures occur, standard users may be temporarily prevented from sending TPM commands requiring authorization. This helps prevent the TPM from entering a hardware lockout because of too many authorization failures. User Security ID:%1. Process Path %2.
0x161011TPM Base Services (TBS) has been configured in a test mode until the next full restart. The TBS will not perform TPM resource virtualization or TPM command blocking until the next full restart.
0x171011A standard user Trusted Platform Module (TPM) command was blocked because the standard user has exceeded the maximum authorization failures permitted. This event is generated when too many recent TPM commands sent to the TPM by a standard user returned a response indicating an authorization failure. The standard user is currently temporarily prevented from sending TPM commands requiring authorization. This helps prevent the TPM from entering a hardware lockout because of too many authorization failures. User Security ID:%1.
0x181011The Trusted Platform Module (TPM) status: %1 and %2.
0x191011Creation of the Windows AIK directory failed.
0x1a1011Creation of provisioning event has failed.
0x1b1011The initialization of the Trusted Platform Module (TPM) failed. The TPM may be in failure mode. To allow diagnosis, contact the TPM manufacturer with the attached information.
0x500000021011Error
0x500000041011Information
0x900000011011TPM
0x900000021011System
0xd00000011011Disabled
0xd00000021011Enabled
0xd00000031011Inactive
0xd00000041011Active
0x1c11Information about the Storage Root Key creation.
0x1d11Creation of the Storage Root Key failed.
0x1e11Reset and/or resume count do not match expected values after hibernate/resume.
0x1f11Information about Kernel Soft Reboot.
0x2011Encountered an error calling TpmApi.
0x2111The Trusted Platform Module (TPM) has been cleared as requested by %3. Keys previously created in the storage and endorsement hierarchies will no longer work.
0x2211A PPI request to clear the Trusted Platform Module (TPM) has been requested by %3.
0x2311The TPM base register address is a non-standard address.
0x5000000311Warning
33 entries