wfascim.dll
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x1 | 1011 | The IPsec DoSP settings are corrupt for the NetIPsecDoSPSetting WMI Object with name: %1 Please use %2 to restore them. |
| 0x2 | 1011 | Fragment grouping must be enabled in order for DoSP settings to function correctly. Please run these commands to enable fragment grouping. %1 %2 |
| 0x3 | 1011 | At least one server or domain name must be specified. |
| 0x4 | 1011 | The specified EndpointType is invalid. |
| 0x5 | 1011 | This edition of Windows does not support the requested functionality. |
| 0x6 | 1011 | %1 %2: %3 |
| 0x7 | 1011 | %1-%2 %3: %4 |
| 0x8 | 1011 | Cannot access the remote domain %1. This may be caused by not having credentials configured for multiple hops over the network. |
| 0x9 | 1011 | The OutboundSecurity/InboundSecurity combination is invalid. Acceptable values for transport mode are None/None, Request/Request, Request/Require, and Require/Require. |
| 0xa | 1011 | The OutboundSecurity/InboundSecurity combination is invalid. Acceptable values for tunnel mode are None/None, Require/Require, and None/Require. |
| 0xb | 1011 | The Authentication/Encryption combination is invalid. Acceptable values are: NotRequired/NotRequired Required/Required Required/NotRequired Required/Dynamic NoEncap/NotRequired |
| 0xc | 1011 | The Key Module is invalid. |
| 0xd | 1011 | A local tunnel endpoint can only be an IPv4 address and/or an IPv6 address. Subnets and ranges are not allowed. |
| 0xe | 1011 | A remote tunnel endpoint can only contain addresses. Subnets and ranges are not allowed. |
| 0xf | 1011 | Tunnel mode properties cannot be applied to transport-mode rules. |
| 0x10 | 1011 | User and machine authentication may only be applied to Allow rules. |
| 0x11 | 1011 | The run-time type of the field does not match the declared type. This indicates that the provider is incorrectly registered in the WMI store. |
| 0x12 | 1011 | An error occurred while retrieving information about the Group Policy container from the Domain Controller. |
| 0x13 | 1011 | Invalid Parameter: %1 |
| 0x14 | 1011 | Unable to parse the GUID. |
| 0x15 | 1011 | Unable to parse Platform string. The format is X[.Y][+], where X is the OS major version, and Y is an optional minor version. + means "or greater". For example, these are valid platform strings: 6, 6.0, 6.0+ |
| 0x16 | 1011 | The address is invalid. Addresses may be specified as IP addresses, ranges, or subnets. Also, the following address keywords are allowed in certain places: LocalSubnet, DNS, DHCP, WINS, DefaultGateway, Internet, Intranet, IntranetRemoteAccess, PlayToDevice. Keywords can be restricted to IPv4 or IPv6 by appending a 4 or 6. |
| 0x17 | 1011 | The port is invalid. When Protocol is TCP or UDP, individual ports or ranges are allowed. Also, the following port keywords are allowed on Firewall Rules: RPC, RPCEPMap, Teredo, IPHTTPSIn, IPHTTPSOut, PlayToDiscovery. |
| 0x18 | 1011 | The protocol is invalid. |
| 0x19 | 1011 | ICMP Type:Code pairs are only supported in Firewall rules. |
| 0x1a | 1011 | The default object %1 is not present in the current store. To find this object, execute the query against the %2. |
| 0x1b | 1011 | The specified interface was not found on the system. |
| 0x1c | 1011 | The ICMP type/code entry is invalid. When Protocol is ICMPv4 or ICMPv6, type:code pairs are allowed. |
| 0x1d | 1011 | When specifying Auth or Crypto Sets, you must use the Name of the set. You cannot pass the object directly. |
| 0x1e | 1011 | DynamicTransport is only valid for firewall rules. |
| 0x1f | 1011 | The key encoding is invalid. |
| 0x20 | 1011 | The cert validation level is invalid. |
| 0x21 | 1011 | The IPsec NAT traversal setting is invalid. |
| 0x22 | 1011 | The ID is invalid. |
| 0x23 | 1011 | The packet queuing flags are invalid. |
| 0x24 | 1011 | RemoteAddress must be specified. |
| 0x25 | 1011 | Both IP addresses must be from the same address family. |
| 37 entries | ||