wpd_ci.dll
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x10000031 | 1011 | Response Time |
| 0x10000038 | 1011 | Classic |
| 0x30000000 | 1011 | Info |
| 0x30000001 | 1011 | Start |
| 0x30000002 | 1011 | Stop |
| 0x40016000 | 1011 | Drivers were successfully installed for device %1. |
| 0x40016001 | 1011 | Media player and imaging program compatibility layers were successfully registered for device %1. Layer bits %2 were requested, layer bits %3 were registered. |
| 0x40016002 | 1011 | Autoplay was successfully registered for device %1. |
| 0x40016003 | 1011 | Autoplay registration was skipped for device %1. |
| 0x40016004 | 1011 | %1: Drivers for %2 device(s) were successfully uninstalled while migrating a dual-mode mass storage class device to Media Transfer Protocol (MTP). |
| 0x40016005 | 1011 | %1: Drivers for %2 device(s) were successfully uninstalled while migrating a Media Transfer Protocol (MTP) device. |
| 0x40016006 | 1011 | %1: Drivers for %2 device(s) were successfully uninstalled while migrating a Media Transfer Protocol (MTP) device, including any devices that were connected and active. |
| 0x40016007 | 1011 | %1: Drivers for %2 device(s) were successfully uninstalled while migrating a Picture Transfer Protocol (PTP) device. |
| 0x40016008 | 1011 | %1: Drivers for %2 device(s) were successfully uninstalled while migrating a Picture Transfer Protocol (PTP) device, including any devices that were connected and active. |
| 0x40016009 | 1011 | %1: Drivers were successfully migrated after Plug and Play was enumerated again. |
| 0x50000004 | 1011 | Information |
| 0x51000001 | 1011 | Critical |
| 0x51000002 | 1011 | Error |
| 0x51000003 | 1011 | Warning |
| 0x70000001 | 1011 | Driver Performance |
| 0x70000010 | 1011 | Driver Installation |
| 0x70000020 | 1011 | Driver Post-Install Configuration |
| 0x70000030 | 1011 | Driver Migration |
| 0x70000040 | 1011 | Device Metadata Retrieval |
| 0x71000010 | 1011 | Driver Initialization |
| 0x71000020 | 1011 | Driver Operation |
| 0x71000030 | 1011 | Driver Failure |
| 0x71000040 | 1011 | Device Error |
| 0x72000020 | 1011 | Transport Management |
| 0x73000001 | 1011 | Driver Health |
| 0x73000002 | 1011 | Link State |
| 0x80016100 | 1011 | %1: This version of Windows does not support Windows Portable Device drivers, so the drivers were not installed. |
| 0x90000001 | 1011 | Microsoft-Windows-WPD-ClassInstaller |
| 0x90000002 | 1011 | Operational |
| 0x90000003 | 1011 | Analytic |
| 0x91000001 | 1011 | Microsoft-Windows-WPD-MTPClassDriver |
| 0x92000001 | 1011 | Microsoft-Windows-WPD-CompositeClassDriver |
| 0x93000001 | 1011 | Microsoft-Windows-Bluetooth-MTPEnum |
| 0x94000001 | 1011 | Microsoft-Windows-WPD-API |
| 0x95000001 | 1011 | Microsoft-Windows-WPD-MTPUS |
| 0x96000001 | 1011 | Microsoft-Windows-WPD-MTPIP |
| 0x97000001 | 1011 | Microsoft-Windows-WPD-MTPBT |
| 0xb0000064 | 1011 | WPD device installation function (%1, %2) begin. |
| 0xb0000065 | 1011 | WPD device installation function (%1, %2) end with this return code (%3). |
| 0xb0000066 | 1011 | WPD device metadata retrieval for device %1 begin |
| 0xb0000067 | 1011 | WPD device metadata retrieval for device %1 end with this return code (%2). |
| 0xb00000c8 | 1011 | Device marked for reinstallation on subsequent connect. |
| 0xb00000c9 | 1011 | %1: Transfer of metadata (%2, %3) succeeded. |
| 0xb00000ca | 1011 | %1: Transfer of metadata (%2, %3) skipped. Error code %4. |
| 0xb00000cb | 1011 | %1: Transfer of metadata (%2, %3) failed. Error code %4. |
| 0xb00000cc | 1011 | %1: Transfer of metadata failed as the Device Metadata Service could not be accessed. Error code %2. |
| 0xb00000cd | 1011 | %1: Successfully opened the Device Metadata Service to retrieve metadata: %2. |
| 0xb00000ce | 1011 | Transfer of metadata (%1, %2) is skipped because the metadata already exists on the system. |
| 0xb00000cf | 1011 | Policy %1 enforced for user account %2, device instance %7. |
| 0xb10003e8 | 1011 | MTP Driver started successfully. |
| 0xb10003e9 | 1011 | Device will enter the suspend state if idle for %1 seconds. |
| 0xb10003ea | 1011 | Device is entering the idle state (Idle state: %1; Return code: %2). |
| 0xb10003eb | 1011 | Device is resuming operation from idle state (Idle state: %1; Return code: %2). |
| 0xb10003ec | 1011 | Driver has cancelled the operation %1 |
| 0xb10003ed | 1011 | Customizing for '%1, %2, %3' (%4). |
| 0xb10003ee | 1011 | Driver has failed to start, HRESULT %1. |
| 0xb10003ef | 1011 | Device has failed to respond to the operation %1 in 5 minutes, attempted to cancel the operationm HRESULT %2. |
| 0xb10003f0 | 1011 | Device has failed to communicate its status when processing operation %1. |
| 0xb10003f1 | 1011 | Bluetooth transport driver has detected a data discontinuity error: (expected sequence ID %1, but recevied %2). |
| 0xb10003f2 | 1011 | Bluetooth transport driver has detected a data integrity error in a bulk data transfer operation: (expected CRC-32 value %1, but received %2). |
| 0xb10003f3 | 1011 | Error in ServicePropList Dataset: Service ID %1, Property ID %2, DataSet Offset %3 |
| 0xb10003f4 | 1011 | FixedArray form flag used with non-array type |
| 0xb10003f5 | 1011 | ByteArray form flag used with non-AUINT8 type |
| 0xb10003f6 | 1011 | LongString form flag used with non-AUINT16 type |
| 0xb10003f7 | 1011 | Error in ObjectPropDesc Dataset: Format ID %1, Property ID %2, DataSet Offset %3 |
| 0xb10003f8 | 1011 | Error in InterdependentPropDesc Dataset: Format ID %1, DataSet Offset %2 |
| 0xb10003f9 | 1011 | Error in ServiceCapabilities Dataset: Service ID %1, Format ID %2, DataSet Offset %3 |
| 0xb10003fa | 1011 | FixedArray form flag used with non-array type |
| 0xb10003fb | 1011 | ByteArray form flag used with non-AUINT8 type |
| 0xb10003fc | 1011 | LongString form flag used with non-AUINT16 type |
| 0xb10003fd | 1011 | Dataset not large enough for expected data |
| 0xb10003fe | 1011 | Error in DeviceInfo Dataset: DataSet Offset %1 |
| 0xb10003ff | 1011 | Error in StorageInfo Dataset: Storage ID %1, DataSet Offset %2 |
| 0xb1000400 | 1011 | Error in ServiceInfo Dataset: Service ID %1, DataSet Offset %2 |
| 0xb1000401 | 1011 | Error in ObjectInfo Dataset: Object ID %1, DataSet Offset %2 |
| 0xb1000402 | 1011 | Error in DevicePropDesc Dataset: Property ID %1, DataSet Offset %2 |
| 0xb1000403 | 1011 | Invalid string specification |
| 0xb1000404 | 1011 | Unable to parse value for MTP DataType %1 |
| 0xb1000405 | 1011 | Error in ServiceIDs: declared %1 elements, but only space to hold %2 elements |
| 0xb1000406 | 1011 | Warning in ServiceIDs: declared %1 elements, but space to hold %2 elements |
| 0xb1000407 | 1011 | Error in ServiceIDs: count of %1 exceeds system limits |
| 0xb1000408 | 1011 | Error in StorageIDs: declared %1 elements, but only space to hold %2 elements |
| 0xb1000409 | 1011 | Warning in StorageIDs: declared %1 elements, but space to hold %2 elements |
| 0xb100040a | 1011 | Error in StorageIDs: count of %1 exceeds system limits |
| 0xb100040b | 1011 | Error in ObjectHandles: declared %1 elements, but only space to hold %2 elements |
| 0xb100040c | 1011 | Warning in ObjectHandles: declared %1 elements, but space to hold %2 elements |
| 0xb100040d | 1011 | Error in ObjectHandles: count of %1 exceeds system limits |
| 0xb100040e | 1011 | Error in ObjectReferences: declared %1 elements, but only space to hold %2 elements |
| 0xb100040f | 1011 | Warning in ObjectReferences: declared %1 elements, but space to hold %2 elements |
| 0xb1000410 | 1011 | Error in ObjectReferences: count of %1 exceeds system limits |
| 0xb1000411 | 1011 | Duplicate Namespace and ID %1.%2 (ignored) |
| 0xb1000412 | 1011 | Duplicate Format ID %1 (ignored) |
| 0xb1000413 | 1011 | Duplicate Method ID %1 (ignored) |
| 0xb1000414 | 1011 | Duplicate Event ID %1 (ignored) |
| 0xb1000415 | 1011 | Duplicate PropCode ID %2 for Service Format %1 (ignored) |
| 0xb1000416 | 1011 | Ambiguous mapping of Namespace and ID %1.%2 to both PropCodes %3 and %4 (ignored) |
| 0xb1000417 | 1011 | Empty Hints Service data block |
| 0xb1000418 | 1011 | Hints Service data block is of invalid size |
| 0xb1000419 | 1011 | Unrecognized MTP DataType %1 |
| 0xb100041a | 1011 | MaxLength of %1 is too large for associated MTP DataType |
| 0xb100041b | 1011 | Unrecognized MTP FormFlag %1 |
| 0xb100041c | 1011 | Abstract property %1.%2 redefined by service %3 |
| 0xb100041d | 1011 | Abstract format %1 redefined by service %2 |
| 0xb100041e | 1011 | Abstract method %1 redefined by service %2 |
| 0xb100041f | 1011 | Abstract event %1 redefined by service %2 |
| 0xb1000420 | 1011 | Warning in ServiceInfo Dataset: Service ID %1, left-over bytes ignored at end of dataset |
| 0xb1000421 | 1011 | Ignoring reference by Service ID %2 to concrete service %1 |
| 0xb1000422 | 1011 | Service ID %2 referencing unknown service %1 |
| 0xb1000423 | 1011 | Service ID %1 specifies unknown service flag %2 (expecting Standard or Abstract) |
| 0xb1000424 | 1011 | Error in Dataset: count of %1 exceeds system limits |
| 0xb1000425 | 1011 | Device does not support bulk version of GetServiceCapabilities |
| 0xb1000426 | 1011 | Device does not support bulk version of GetServiceProperties |
| 0xb1000427 | 1011 | Method ID %1 referencing unknown association format %2 |
| 0xb1000428 | 1011 | Device does not support bulk version of GetFormatCapabilities |
| 0xb1000429 | 1011 | Error in FormatCapabilities Dataset: Format ID %1, DataSet Offset %2 |
| 0xb100042a | 1011 | Bluetooth transport driver has terminated an MTP Bluetooth connection due to failure to recover from a transport error (MTP OpCode %1). |
| 0xb100042b | 1011 | Error in GetObjectPropsSupported Dataset: DataSet Offset %1 |
| 0xb100042c | 1011 | Error in GetObjectPropList Dataset: DataSet Offset %1 |
| 0xb10007d0 | 1011 | MTP Request |
| 0xb10007d1 | 1011 | MTP Data(in) and Response |
| 0xb10007d2 | 1011 | MTP Data(in) and Response for GetDevice/ObjectPropValue |
| 0xb10007d3 | 1011 | MTP Response |
| 0xb10007d4 | 1011 | MTP Event received from device |
| 0xb10007d5 | 1011 | MTP Bulk GetObjectProperties by Object Format |
| 0xb10007d6 | 1011 | MTP Request and Data(out) |
| 0xb10007d7 | 1011 | MTP Request and Data(out) for SetDevice/ObjectPropValue |
| 0xb2000064 | 1011 | Transport Arrival Begin: %1 |
| 0xb2000065 | 1011 | Transport Arrival End: %1 |
| 0xb2000066 | 1011 | Transport Departure Begin: %1 |
| 0xb2000067 | 1011 | Transport Departure End: %1 |
| 0xb2000068 | 1011 | OnCreateFile Begin: %1 |
| 0xb2000069 | 1011 | OnCreateFile End: %1 |
| 0xb200006a | 1011 | DeviceIoControl Begin |
| 0xb200006b | 1011 | DeviceIoControl End |
| 0xb200006c | 1011 | Transport Look-Up Begin |
| 0xb200006d | 1011 | Transport Look-Up End |
| 0xb200006e | 1011 | Custom Event Relay Begin |
| 0xb200006f | 1011 | Custom Event Relay End |
| 0xb2000070 | 1011 | Commit Transport Interface States Begin |
| 0xb2000071 | 1011 | Commit Transport Interface States End |
| 0xb20000c8 | 1011 | Transport Arrival: %1 |
| 0xb20000c9 | 1011 | Transport Departure: %1 |
| 0xb20000ca | 1011 | Enabled Interface GUID: %1, ReferenceString: %2 |
| 0xb20000cb | 1011 | Disabled Interface GUID: %1, ReferenceString: %2 |
| 0xb200012c | 1011 | No Multi-Transport support with the current version of the User Mode Driver Framework |
| 0xb200012d | 1011 | Unable to create remote interface for transport: %1 |
| 0xb200012e | 1011 | Unable to open IoTarget for transport: %1 |
| 0xb200012f | 1011 | Transport driver returned an incorrect MULTI_TRANSPORT_BANDWIDTH structure. Expected Size: %1, Actual Size: %2 |
| 0xb2000130 | 1011 | Transport driver returned an incorrect MULTI_TRANSPORT_INTERFACE_STATE structure. Expected Size: >= %1, Actual Size: %2 |
| 0xb2000131 | 1011 | Transport driver returned an incorrect MULTI_TRANSPORT_HDR structure. Expected Size: >= %1, Actual Size: %2 |
| 0xb2000132 | 1011 | MULTI_TRANSPORT_INTERFACE_STATE structure too short for provided reference string, or reference string not NULL-terminated |
| 0xb2000133 | 1011 | Reference string not expected for specified action (MULTI_TRANSPORT_INTERFACE_STATE) |
| 0xb2000134 | 1011 | Unexpected function for MULTI_TRANSPORT_INTERFACE_STATE: %1 Must be one of: FUNCTION_MULTI_TRANSPORT_BANDWIDTH FUNCTION_MULTI_TRANSPORT_INTERFACE_STATE |
| 0xb2000135 | 1011 | Unexpected action for MULTI_TRANSPORT_INTERFACE_STATE: %1 Must be one of: ACTION_MULTI_TRANSPORT_ENABLE ACTION_MULTI_TRANSPORT_DISABLE ACTION_MULTI_TRANSPORT_ENDOFSET ACTION_MULTI_TRANSPORT_DISABLEALL |
| 0xb2000136 | 1011 | Unexpected HRESULT for IOCTL_TRANSPORT_REQUEST initiation: %1 Interface state discovery has stopped. |
| 0xb2000137 | 1011 | Unexpected HRESULT for IOCTL_TRANSPORT_REQUEST completion: %1 Interface state discovery has stopped. |
| 0xb2000138 | 1011 | Transport driver returned an incorrect MULTI_TRANSPORT_STATE structure. Expected Size: >= %1, Actual Size: %2 |
| 0xb2000139 | 1011 | Transport driver returned an incorrect MULTI_TRANSPORT_FRIENDLYNAME structure. Expected Size: >= %1, Actual Size: %2 |
| 0xb200013a | 1011 | MULTI_TRANSPORT_FRIENDLYNAME structure too short for provided string, or string not NULL-terminated |
| 0xb200013b | 1011 | MULTI_TRANSPORT_FRIENDLYNAME structure must provide a NULL-terminated string |
| 0xb200013c | 1011 | Could not extract properties for interface state request. The data may be invalid. |
| 0xb3000064 | 1011 | MTP Bluetooth enumerator driver is operational with status code (%1). |
| 0xb3000065 | 1011 | MTP Bluetooth enumerator driver has failed to operate with error code (%1). |
| 0xb3000066 | 1011 | MTP Bluetooth enumerator driver has created a device object with status code (%1). |
| 0xb3000067 | 1011 | MTP Bluetooth enumerator driver has failed to create a device object with error code (%1). |
| 0xb30000c8 | 1011 | An MTP Bluetooth Link between PC and an MTP Bluetooth device has been established (%1). |
| 0xb30000c9 | 1011 | An MTP Bluetooth Link between PC and an MTP Bluetooth device has been disassociated (%1). |
| 0xb30000ca | 1011 | An MTP Bluetooth Link connection is being initiated by (%1). |
| 0xb30000cb | 1011 | An MTP Bluetooth Link connection is being disassociated by (%1). |
| 0xb4000064 | 1011 | API request to Driver |
| 0xb4000065 | 1011 | Driver response to API |
| 0xb5000064 | 1011 | Write MTP USB SendCommand |
| 0xb5000065 | 1011 | Write MTP USB Response |
| 0xb5000066 | 1011 | Received MTP USB Device Event |
| 0xb5000067 | 1011 | Read MTP USB Data header |
| 0xb5000068 | 1011 | Write MTP USB Data header |
| 0xb5000069 | 1011 | MTP USB Control Transfer GetStatus request |
| 0xb500006a | 1011 | MTP USB Control Transfer DeviceReset request |
| 0xb500006b | 1011 | MTP USB Control Transfer CancelIO request |
| 0xb50000c8 | 1011 | Send MTP Multisession USB SendCommand |
| 0xb50000c9 | 1011 | Received MTP Multisession USB StartData block |
| 0xb50000ca | 1011 | Received MTP Multisession USB Response block |
| 0xb50000cb | 1011 | Received MTP Multisession USB DataHeader block |
| 0xb50000cc | 1011 | Received MTP Multisession USB Event block |
| 0xb50000cd | 1011 | Received MTP Multisession USB EndData block |
| 0xb50000ce | 1011 | Received MTP Multisession USB Unknown block |
| 0xb50000cf | 1011 | Sending MTP Multisession USB StartData block |
| 0xb50000d0 | 1011 | Sending MTP Multisession USB DataHeader block |
| 0xb6000064 | 1011 | Write MTP IP Packet to Data channel |
| 0xb6000065 | 1011 | Write MTP IP Packet to Event channel |
| 0xb6000066 | 1011 | Read MTP IP Packet from Data channel |
| 0xb6000067 | 1011 | Read MTP IP Packet from Event channel |
| 0xb6000068 | 1011 | Read MTP IP Data Packet |
| 0xb6000069 | 1011 | Received IP Device Event |
| 0xb600006a | 1011 | Received IP Unexpected header on data channel |
| 0xb600006b | 1011 | Received IP Unexpected header on event channel |
| 0xb7000064 | 1011 | Write MTP BT Packet to data channel |
| 0xb7000065 | 1011 | Write MTP BT Packet to event channel |
| 0xb7000066 | 1011 | Read MTP BT Packet from data channel |
| 0xb7000067 | 1011 | Read MTP BT Packet from event channel |
| 0xb7000068 | 1011 | Read MTP BT Data Packet |
| 0xb7000069 | 1011 | Received BT Device Event |
| 0xb700006a | 1011 | Received BT Unexpected header on data channel |
| 0xb700006b | 1011 | Received BT Unexpected header on event channel |
| 0xc0016200 | 1011 | It was not possible to install drivers for the device %1. Error code %2. |
| 0xc0016201 | 1011 | It was not possible to access the device (%1) after installing drivers. Error code %2. |
| 0xc0016202 | 1011 | It was not possible to register media player and imaging program layers for the device %1. Error code %2. |
| 0xc0016203 | 1011 | It was not possible to register autoplay for device %1. Error code %2. |
| 0xc0016204 | 1011 | %1 failed to uninstall drivers when migrating dual-mode devices from mass storage class to Media Transfer Protocol (MTP). Error code %2. |
| 0xc0016205 | 1011 | %1 failed to uninstall drivers for single-protocol Media Transfer Protocol (MTP) devices. Error %2. |
| 0xc0016206 | 1011 | %1 failed to uninstall drivers for single-protocol Picture Transfer Protocol (PTP) devices. Error %2. |
| 0xc0016207 | 1011 | %1: It was not possible to enumerate Plug and Play again after drivers were migrated. Error code %2. |
| 217 entries | ||