autoconv.exe

Associated Error Codes

Below lists error codes and symbolic names found for this module.

Code	Found in	Description
0x3e8	78.110	Convert lost chains to files (Y/N)?
0x3e9	78.110	Unrecoverable error in folder %1.
0x3ea	78.110	Convert folder to file (Y/N)?
0x3eb	78.110	%1 bytes total disk space.
0x3ec	78.110	%1 bytes in bad sectors.
0x3ed	78.110	%1 bytes in %2 hidden files.
0x3ee	78.110	%1 bytes in %2 folders.
0x3ef	78.110	%1 bytes in %2 files.
0x3f0	78.110	%1 bytes in %2 recovered files.
0x3f1	78.110	%1 bytes in %2 recoverable files.
0x3f2	78.110	%1 bytes available on disk.
0x3f3	78.110	%1 total bytes memory.
0x3f4	78.110	%1 bytes free.
0x3f5	78.110	Windows cannot check a disk attached through a network.
0x3f6	78.110	Windows cannot check a disk that is substituted or assigned using the SUBST or ASSIGN command.
0x3f7	78.110	The specified disk appears to be a non-Windows XP disk. Updating FAT media type.
0x3f8	78.110	An error occurred while reading the file allocation table (FAT %1).
0x3f9	78.110	Folder %1.
0x3fa	78.110	%1 contains %2 non-contiguous blocks.
0x3fb	78.110	All specified files are contiguous.
0x3fc	78.110	Windows found errors on the disk, but will not fix them because disk checking was run without the /F (fix) parameter.
0x3fd	78.110	The file allocation table (FAT) on disk %1 is corrupted.
0x3fe	78.110	%1 first allocation unit is not valid. The entry will be truncated.
0x3ff	78.110	File and folder verification is complete.
0x400	78.110	The volume is too large to convert.
0x401	78.110	The volume may have inconsistencies. Run Chkdsk, the disk checking utility.
0x404	78.110	An allocation error occurred. The file size will be adjusted.
0x405	78.110	Cannot recover .. entry, processing continued.
0x406	78.110	Folder is totally empty, no . or ..
0x407	78.110	Folder is joined.
0x408	78.110	Cannot recover .. entry.
0x409	78.110	The %1 entry contains a nonvalid link.
0x40a	78.110	Windows has found an entry that contains a nonvalid attribute.
0x40b	78.110	The size of the %1 entry is not valid.
0x40c	78.110	%1 is cross-linked on allocation unit %2.
0x40d	78.110	Windows cannot find the %1 folder. Disk check cannot continue past this point in the folder structure.
0x40e	78.110	The folder structure past this point cannot be processed.
0x40f	78.110	%1 bytes of free disk space added.
0x410	78.110	%1 bytes of free disk space would be added.
0x411	78.110	Volume %1 created %2 %3
0x412	78.110	%1 total allocation units on disk.
0x413	78.110	%1 bytes in each allocation unit.
0x414	78.110	Disk checking is not available on disk %1.
0x415	78.110	A nonvalid parameter was specified.
0x416	78.110	The specified path was not found.
0x417	78.110	The %1 file was not found.
0x418	78.110	%1 lost allocation units were found in %2 chains.
0x419	78.110
0x41a	78.110	The CHDIR command cannot switch to the root folder.
0x41b	78.110	A disk error occurred during writing of the file allocation table.
0x41c	78.110	%1.
0x41e	78.110	%1
0x41f	78.110	The root folder on this volume is full. To perform a disk check, Windows requires space in the root folder. Remove some files from this folder, then run disk checking again.
0x420	78.110	%1 %2 %3.
0x421	78.110	%1 %2, %3.
0x422	78.110	%1%2%3%4%5.
0x423	78.110	%1%2%3%4.
0x424	78.110	%1 available allocation units on disk.
0x425	78.110	Windows disk checking cannot fix errors (/F) when run from an MS-DOS window. Try again from the Windows XP shell or command prompt.
0x426	78.110	An unspecified error occurred.
0x427	78.110	This never gets printed.
0x428	78.110	Checks a disk and displays a status report.
0x429	8.110	CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B] [/scan] [/spotfix]
0x42a	8.110	volume Specifies the drive letter (followed by a colon), mount point, or volume name.
0x42b	10	filename FAT/FAT32 only: Specifies the files to check for fragmentation.
0x42c	8.110	/F Fixes errors on the disk.
0x42d	10	/V On FAT/FAT32: Displays the full path and name of every file on the disk. On NTFS: Displays cleanup messages if any. /R Locates bad sectors and recovers readable information (implies /F, when /scan not specified). /L:size NTFS only: Changes the log file size to the specified number of kilobytes. If size is not specified, displays current size. /X Forces the volume to dismount first if necessary. All opened handles to the volume would then be invalid (implies /F). /I NTFS only: Performs a less vigorous check of index entries. /C NTFS only: Skips checking of cycles within the folder structure. /B NTFS only: Re-evaluates bad clusters on the volume (implies /R) /scan NTFS only: Runs an online scan on the volume /forceofflinefix NTFS only: (Must be used with "/scan") Bypass all online repair; all defects found are queued for offline repair (i.e. "chkdsk /spotfix"). /perf NTFS only: (Must be used with "/scan") Uses more system resources to complete a scan as fast as possible. This may have a negative performance impact on other tasks running on the system. /spotfix NTFS only: Runs spot fixing on the volume /sdcleanup NTFS only: Garbage collect unneeded security descriptor data (implies /F). /offlinescanandfix Runs an offline scan and fix on the volume. /freeorphanedchains FAT/FAT32/exFAT only: Frees any orphaned cluster chains instead of recovering their contents. /markclean FAT/FAT32/exFAT only: Marks the volume clean if no corruption was detected, even if /F was not specified. The /I or /C switch reduces the amount of time required to run Chkdsk by skipping certain checks of the volume.
0x42e	78.110	To check the current disk, type CHKDSK with no parameters.
0x42f	78.110	Windows cannot run disk checking on CD-ROM and DVD-ROM drives.
0x430	78.110	Checking file system on %1
0x431	78.110	The volume is clean.
0x432	78.110	Removing trailing folder entries from %1
0x433	78.110	Windows replaced bad clusters in file %1 of name %2.
0x434	78.110	The disk does not have enough space to replace bad clusters detected in file %1 of name %2.
0x435	78.110	Windows is verifying free space...
0x436	78.110	Free space verification is complete.
0x437	78.110	Windows is verifying files and folders...
0x438	78.110	Windows cannot upgrade this FAT volume.
0x439	78.110	The specified volume name does not have a mount point or drive letter.
0x43a	78.110	The volume is dirty.
0x43b	78.110	Autochk cannot run due to an error caused by a recently installed software package. Use the system restore feature from the control panel to restore the system to a point prior to the recent software package installation.
0x43c	78.110	An unspecified error occurred (%1 %2).
0x43d	8.110	/SDCLEANUP can not be specified with /r, /b, /i, or /c options.
0x43e	8.110	/PERF can be specified only with /SCAN.
0x43f	8.110	/FORCEOFFLINEFIX can be specified only with /SCAN.
0x440	10	Phase duration (%1): %2.
0x441	10	Total duration: %1 (%2 ms).
0x442	10	File record verification
0x443	10	Orphan file record recovery
0x444	10	Bad file record checking
0x445	10	EA verification
0x446	10	Reparse point and Object ID verification
0x447	10	Index verification
0x448	10	Orphan reconnection
0x449	10	Orphan recovery to lost and found
0x44a	10	Security descriptor compaction
0x44b	10	Security descriptor verification
0x44c	78.110	Do you want to schedule Windows to check your disk the next time you start your computer? (Y/N)
0x44d	78.110	Windows will check your disk the next time you start your computer.
0x44e	78.110	Windows has finished checking your disk. Please wait while your computer restarts.
0x44f	78.110	Removing nonvalid long folder entry from %1...
0x450	78.110	Now checking %1...
0x451	78.110	Removing orphaned long folder entry %1...
0x452	78.110	The log file size must be greater than 0.
0x453	78.110	Windows can set log file size on NTFS volumes only.
0x454	78.110	The drive, the path, or the file name is not valid.
0x455	78.110	%1 KB in %2 files.
0x456	78.110	%1 KB in %2 folders.
0x457	78.110	%1 KB in %2 hidden files.
0x458	78.110	%1 KB in %2 recoverable files.
0x459	78.110	%1 KB in %2 recovered files.
0x45a	78.110	To skip disk checking, press any key within %1 second(s).
0x45b	78.110	Disk checking has been cancelled.
0x45c	78.110	Windows will now check the disk.
0x45d	78.110	%1 KB of free disk space added.
0x45e	78.110	%1 KB of free disk space would be added.
0x45f	78.110	The /I option functions only on NTFS volumes.
0x460	78.110	The /C option functions only on NTFS volumes.
0x461	78.110	Windows has finished checking the disk.
0x462	78.110	One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue.
0x463	78.110	A disk check has been scheduled.
0x464	78.110	Windows was unable to determine if the specified volume is a system volume.
0x465	8.110	Windows has scanned the file system and found no problems. No further action is required.
0x466	8.110	Windows has made corrections to the file system. No further action is required.
0x467	8.110	Windows has checked the file system and found problems. Run CHKDSK with the /F (fix) option to correct these.
0x468	78.110	Windows found problems with the file system that could not be corrected.
0x469	78.110	THIS IS AN EXPERIMENTAL VERSION OF CHKDSK. PLEASE USE IT ACCORDING TO THE GIVEN INSTRUCTIONS.
0x46a	78.110	The /I and /I:passes cannot be specified at the same time.
0x46b	78.110	The number of passes specified through /I is invalid.
0x46c	78.110	Windows cannot run disk checking on this volume because it is write protected.
0x46d	78.110	Windows cannot run disk checking on more than one volume of the same file system. To do so, please run CHKDSK from the command line.
0x46e	78.110	Error in writing the output log.
0x46f	78.110	Windows supports re-evaluating bad clusters on NTFS volumes only.
0x470	78.110	Removing %1 clusters from the Bad Clusters File.
0x471	78.110	Windows failed to remove clusters from the Bad Clusters File.
0x472	78.110	Windows failed to remove clusters from the Bad Clusters File.
0x473	8.110	Windows has fixed all previously identified issues with this drive. No further action is required.
0x474	10	Windows could not fix all issues with this drive. Please run chkdsk /f to find and fix all problems with this drive.
0x475	8.110	Windows has checked the file system and found problems. Please run chkdsk /scan to find the problems and queue them for repair.
0x476	8.110	To skip disk checking, press any key within %1 second(s).
0x514	10	Data attribute verification
0x515	10	USN journal verification
0x516	10	User file recovery
0x517	10	Free space recovery
0x518	10	days
0x519	10	hours
0x51a	10	minutes
0x51b	10	seconds
0x51c	10	milliseconds
0x51d	10	Failed to initialize or fix the master file table (case %1). CHKDSK aborted.
0x51e	10	Failed to initialize or fix the volume bitmap (case %1). CHKDSK aborted.
0x7d0	78.110	%1 percent completed.
0x7d1	78.110	Format complete.
0x7d2	78.110	Insert new disk for drive %1
0x7d3	78.110	Reinsert disk for drive %1:
0x7d4	78.110	%1 percent completed.%2
0x7d6	78.110	Error in IOCTL call.
0x7d7	78.110	Cannot open volume for direct access.
0x7d8	78.110	Error writing File Allocation Table (FAT).
0x7d9	78.110	Error writing folder.
0x7dc	78.110	Cannot format a network drive.
0x7dd	78.110	Parameters not supported.
0x7e0	78.110	Invalid media or Track 0 bad - disk unusable.
0x7e2	78.110	Error reading folder %1.
0x7e3	78.110	and press ENTER when ready...
0x7e5	78.110	Enter current volume label for drive %1
0x7e6	78.110	Parameters incompatible with fixed disk.
0x7e7	78.110	Error reading partition table.
0x7ec	78.110	Parameters not supported by drive.
0x7ed	78.110
0x7ee	78.110
0x7ef	78.110	Insert Windows XP disk in drive %1:
0x7f0	78.110	WARNING, ALL DATA ON NON-REMOVABLE DISK DRIVE %1 WILL BE LOST! Proceed with Format (Y/N)?
0x7f1	78.110	Format another (Y/N)?
0x7f3	78.110	Error writing partition table.
0x7f4	78.110	Parameters not compatible.
0x7f5	78.110	%1 allocation units available on disk.
0x7f6	78.110	%1 bytes in each allocation unit.
0x7f8	78.110	Same parameter entered twice.
0x7f9	78.110	Must enter both /t and /n parameters.
0x7fa	78.110	Trying to recover allocation unit %1.
0x7ff	78.110	Volume label is not supported with /8 parameter.
0x801	78.110	Insufficient memory.
0x802	78.110	QuickFormat another (Y/N)?
0x804	78.110	Invalid existing format. This disk cannot be QuickFormatted. Proceed with unconditional format (Y/N)?
0x805	8.110	Formatting %1 KB
0x806	8.110	Formatting %1 MB
0x807	78.110	Formatting %1.%2M
0x809	8.110	Verifying %1 KB
0x80a	8.110	Verifying %1 MB
0x80b	78.110	Verifying %1.%2M
0x80c	78.110	Saving UNFORMAT information.
0x80d	78.110	Checking existing disk format.
0x80e	8.110	QuickFormatting %1 KB
0x80f	8.110	QuickFormatting %1 MB
0x810	78.110	QuickFormatting %1.%2M
0x811	78.110	Formats a disk for use with Windows.
0x812	10	FORMAT volume [/FS:file-system] [/V:label] [/Q] [/L[:state]] [/A:size] [/C] [/I:state] [/X] [/P:passes] [/S:state] FORMAT volume [/V:label] [/Q] [/F:size] [/P:passes]
0x813	78.110	FORMAT volume [/V:label] [/Q] [/T:tracks /N:sectors] [/P:passes]
0x814	78.110	FORMAT volume [/V:label] [/Q] [/P:passes]
0x815	10	FORMAT volume [/Q] volume Specifies the drive letter (followed by a colon), mount point, or volume name. /FS:filesystem Specifies the type of the file system (FAT, FAT32, exFAT, NTFS, UDF).
0x816	78.110	/V:label Specifies the volume label.
0x817	78.110	/Q Performs a quick format. Note that this switch overrides /P.
0x818	78.110	/C NTFS only: Files created on the new volume will be compressed by default.
0x819	10	/A:size Overrides the default allocation unit size. Default settings are strongly recommended for general use. NTFS supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M. FAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). exFAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M, 4M, 8M, 16M, 32M. Note that the FAT and FAT32 files systems impose the following restrictions on the number of clusters on a volume: FAT: Number of clusters <= 65526 FAT32: 65526 < Number of clusters < 4177918 Format will immediately stop processing if it decides that the above requirements cannot be met using the specified cluster size. NTFS compression is not supported for allocation unit sizes above 4096. /F:size Specifies the size of the floppy disk to format (1.44)
0x81a	78.110	180, 320, 360, 640, 720, 1.2, 1.23, 1.44, 2.88, or 20.8).
0x81b	78.110	An incorrect volume label was entered for this drive.
0x81d	78.110	/T:tracks Specifies the number of tracks per disk side.
0x81e	78.110	/N:sectors Specifies the number of sectors per track.
0x81f	78.110	/1 Formats a single side of a floppy disk.
0x820	78.110	/4 Formats a 5.25-inch 360K floppy disk in a high-density drive.
0x821	78.110	/8 Formats eight sectors per track.
0x822	78.110	/X Forces the volume to dismount first if necessary. All opened handles to the volume would no longer be valid.
0x823	78.110	Cannot format a CD-ROM drive.
0x824	78.110	Cannot format a RAM DISK drive.
0x826	78.110	Please use the /FS switch to specify the file system you wish to use on this volume.
0x827	78.110	Format failed.
0x828	78.110	Cannot format. This volume is write protected.
0x829	78.110	WARNING! The %1 file system is not enabled. Would you like to enable it (Y/N)?
0x82a	78.110	The file system will be enabled when you restart the system.
0x82b	78.110	FORMAT cannot enable the file system.
0x82c	78.110	The volume is too small for the specified file system.
0x82d	78.110	Creating file system structures.
0x82e	78.110	%1 FORMAT does not support user selected allocation unit sizes.
0x830	78.110	The device is busy.
0x831	78.110	The specified format cannot be mastered on 2.88MB drives.
0x832	78.110	FORMAT does not support the HPFS file system type.
0x833	78.110	Allocation unit size changed to %1 bytes.
0x834	10	Allocation unit size must be less than or equal to %1MB.
0x835	78.110	Number of clusters exceeds 32 bits.
0x836	78.110	Cannot determine the number of sectors on this volume.
0x837	78.110	%1 bad sectors were encountered during the format. These sectors cannot be guaranteed to have been cleaned.
0x838	8.110	/P:count Zero every sector on the volume. After that, the volume will be overwritten "count" times using a different random number each time. If "count" is zero, no additional overwrites are made after zeroing every sector. This switch is ignored when /Q is specified.
0x839	8.110	The cluster size is illegal.
0x83a	78.110	The volume is too small for the requested cluster size.
0x83b	78.110	Cannot format with the allocation size %1. The default allocation size for the medium is %2.
0x83c	8.110	/I:state ReFS only: Specifies whether integrity should be enabled on the new volume. "state" is either "enable" or "disable" Integrity is enabled on storage that supports data redundancy by default.
0x83d	8.110	QuickFormatting %1 Bytes
0x83e	8.110	QuickFormatting %1 GB
0x83f	8.110	QuickFormatting %1 TB
0x840	8.110	QuickFormatting %1 PB
0x841	8.110	QuickFormatting %1 EB
0x842	8.110	Formatting %1 Bytes
0x843	8.110	Formatting %1 GB
0x844	8.110	Formatting %1 TB
0x845	8.110	Formatting %1 PB
0x846	8.110	Formatting %1 EB
0x847	8.110	Verifying %1 Bytes
0x848	8.110	Verifying %1 GB
0x849	8.110	Verifying %1 TB
0x84a	8.110	Verifying %1 PB
0x84b	8.110	Verifying %1 EB
0x84c	10	FORMAT volume [/Q] volume Specifies the drive letter (followed by a colon), mount point, or volume name. /FS:filesystem Specifies the type of the file system (FAT, FAT32, exFAT, NTFS, UDF, ReFS).
0x84d	10	/A:size Overrides the default allocation unit size. Default settings are strongly recommended for general use. ReFS supports 4096, 64K. NTFS supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M. FAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). exFAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M, 4M, 8M, 16M, 32M. Note that the FAT and FAT32 files systems impose the following restrictions on the number of clusters on a volume: FAT: Number of clusters <= 65526 FAT32: 65526 < Number of clusters < 4177918 Format will immediately stop processing if it decides that the above requirements cannot be met using the specified cluster size. NTFS compression is not supported for allocation unit sizes above 4096. /F:size Specifies the size of the floppy disk to format (1.44)
0x84e	10	/A:size Overrides the default allocation unit size. Default settings are strongly recommended for general use. ReFS supports 4096, 64K. NTFS supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M. FAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). exFAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M, 4M, 8M, 16M, 32M. Note that the FAT and FAT32 files systems impose the following restrictions on the number of clusters on a volume: FAT: Number of clusters <= 65526 FAT32: 65526 < Number of clusters < 4177918 Format will immediately stop processing if it decides that the above requirements cannot be met using the specified cluster size. NTFS compression is not supported for allocation unit sizes above 4096. /F:size Specifies the size of the floppy disk to format (1.44)
0x89b	78.110	Preinstallation completed successfully. Press any key to shut down/reboot.
0x89c	78.110	Convert will take some time to process the files on the volume. When this phase of conversion is complete, the computer will restart.
0x89d	78.110	%1 bits in each FAT entry.
0x89e	78.110	WARNING! The cluster size chosen by the system is %1 bytes which differs from the specified cluster size. Proceed with Format using the cluster size chosen by the system (Y/N)?
0x89f	78.110	WARNING! The cluster size chosen by the system is %1 bytes which differs from the specified cluster size.
0x8a0	78.110	The specified cluster size is too big for %1.
0x8a1	78.110	The volume is too big for %1.
0x8a2	78.110	The volume is too small for %1.
0x8a3	78.110	Failed to write to the root folder.
0x8a4	78.110	Failed to initialize the volume label.
0x8a5	78.110	Initializing the File Allocation Table (FAT)...
0x8a6	78.110	WARNING! The cluster size for this volume, 64K bytes, may cause application compatibility problems, particularly with setup applications. The volume must be less than 2048 MB in size to change this if the default cluster size is being used. Proceed with Format using a 64K cluster (Y/N)?
0x8a7	78.110	WARNING! The cluster size for this volume, 64K bytes, may cause application compatibility problems, particularly with setup applications. The volume must be less than 2048 MB in size to change this if the default cluster size is being used.
0x8a8	78.110	Environmental variable FORMAT_SECTORS error.
0x8a9	78.110	Format cannot run because the volume is in use by another process. Format may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? (Y/N)
0x8aa	78.110	There is no media in the drive.
0x8ab	78.110	The given volume name does not have a mount point or drive letter.
0x8ac	78.110	Invalid drive specification.
0x8ad	78.110	The given volume name does not have a mount point or drive letter.
0x8ae	78.110	The specified cluster size is too small. The minimum valid cluster size value for this drive is %1.
0x8af	78.110	Floppy disk is too small to hold the FAT32 file system.
0x8b0	78.110	NTFS file system is not supported on this device.
0x8b1	78.110	The specified cluster size is too small for %1.
0x8b2	78.110	Set number of sectors on drive to %1.
0x8b3	78.110	/R:revision UDF only: Forces the format to a specific UDF version (1.02, 1.50, 2.00, 2.01, 2.50). The default revision is 2.01.
0x8b4	78.110	This device cannot be formatted in quick mode. Proceed with unconditional format (Y/N)?
0x8b5	78.110	Communication failure with device. Format failed.
0x8b6	78.110	Format failed due to timeout.
0x8b7	78.110	This device cannot be formatted in quick mode. An unconditional format will be performed.
0x8b8	78.110	This device requires proprietary format utility from manufacturer.
0x8b9	78.110	WARNING! This device may not work properly if /A option is specified. Proceed (Y/N)?
0x8ba	78.110	WARNING! This device may not work properly since /A option is specified.
0x8bb	78.110	Unable to create the MEMSTICK.IND file.
0x8bc	78.110	FAT32 file system is not supported on this device.
0x8bd	78.110	This device does not support the /F option.
0x8be	78.110	System Partition is not allowed to be formatted.
0x8bf	78.110	NTFS file system is not supported on this device optimized for removal. To change the way this device is optimized, select the Policies tab in the device's property sheet.
0x8c0	78.110	The specified cluster size is invalid. Format failed.
0x8c1	78.110	This disk can be QuickFormatted and does not need a unconditional format which can take a long time. Proceed with quick format instead (Y/N)?
0x8c2	78.110	Blanking media ...
0x8c3	78.110	Performing low level format ...
0x8c4	78.110	Windows cannot format this type of media.
0x8c5	78.110	FAT/FAT32 file system is not supported on this device.
0x8c6	78.110	Floppy disks cannot be formatted with the UDF file system.
0x8c7	78.110	/D UDF 2.50 only: Metadata will be duplicated.
0x8c8	78.110	The media cannot be formatted with the specified UDF version.
0x8c9	78.110	UDF does not allow metadata duplication on UDF versions lower than 2.50
0x8ca	78.110	UDF does not allow metadata duplication on media that does not support writes in place.
0x8cb	78.110	Floppy disks cannot be formatted with the eXFAT file system.
0x8cc	78.110	Optical media cannot be formatted with the eXFAT file system.
0x8cd	78.110	The API %1 failed with error %2.
0x8ce	78.110	The API %1 processed the wrong number of bytes.
0x8cf	78.110	Heap allocation of %1 bytes failed.
0x8d0	78.110	Unrecognized media.
0x8d1	78.110	%1
0x8d2	78.110	A low-level format on this media may take a long time. The drive won't be usable during this period and it is recommended not to shutdown the machine until format is complete. Proceed with low level format (Y/N)?
0x8d3	78.110	Cluster size must be a multiplication of the physical sector size (%1 bytes).
0x8d4	78.110	A hardware error occurred while formatting this disc. You can try again with a different disc, but if this problem persists, using the Live File System on this drive is not recommended. The Mastered option should be used instead.
0x8d5	78.110	The "/s:" option accepts only "enable" or "disable".
0x8d6	8.110	/S:state Specifies support for short filenames (enable, disable)
0x8d7	78.110	Short names are enabled by default
0x8d8	78.110	Short names are disabled by default
0x8d9	8.110	The "/R:" and "/D" options are only supported on the UDF file system.
0x8da	8.110	ReFS file system is not supported on this device.
0x8db	10	/L[:state] NTFS Only: Overrides the default size of file record. By default, a non-tiered volume will be formatted with small size file records and a tiered volume will be formatted with large size file records. /L and /L:enable forces format to use large size file records and /L:disable forces format to use small size file records.
0x8dc	8.110	The "/I:" option accepts only "enable" or "disable".
0x8dd	8.110	/TrNH NTFS and ReFS Only: For volumes with tiered storage, causes Heat gathering to be disabled.
0x8de	10	This volume is configured for use only by the ReFS file system.
0x8df	10	/DAX[:state] NTFS Only: Enable direct access storage (DAX) mode for this volume. In DAX mode, the volume is accessed via the memory bus, boosting IO performance. A volume can be formatted with DAX mode only if the hardware is DAX capable. State can specify "enable" or "disable". /DAX is considered as /DAX:enable.
0x8e0	10	The device is not DAX capable. Try formatting without DAX support.
0x8e1	10	The "/L" option can only be used once.
0x8e2	10	The "/L:" option accepts only "enable" or "disable".
0x8e3	10	/TXF:state Specifies txf is enabled/disabled (enabled, disabled)
0x8e4	10	TxF is enabled by default
0x8e5	10	TxF is disabled by default
0x8e6	10	The "/DAX:" option accepts only "enable" or "disable".
0x8e7	10	The "/DAX" option can only be used once.
0x8e8	10	DAX is not supported on MBR partitioned disk. Try formatting without DAX support or repartition the disk with GPT.
0x8e9	10	DAX is supported only on GPT data partition. Try formatting without DAX support.
0x8ea	10	/LogSize[:size] NTFS Only: Specifies the size for NTFS log file in kilobytes. The minimum supported size is 2MB, so specifying size smaller than 2MB will result in a 2MB log file. Zero indicates the default value which generally depend on the volume size.
0x8eb	10	/NoRepairLogs NTFS Only: Disables NTFS repair logs. If the flag is set spotfix (i.e. chkdsk /spotfix) will not work.
0x8ec	10	Starting offset of the thinly provisioned or DAX partition is not aligned to a cluster boundary.
0x8ed	10	Partition is %1 bytes aligned.
0x8ee	10	Partition is %1 KB aligned.
0x8ef	10	To format with specified cluster size, align the partition to %1 KB.
0x8f0	10	Partition is %1 MB aligned.
0x8f1	10	To format with specified cluster size, align the partition to %1 MB.
0xbb8	78.110	Cannot lock the drive. The volume is still in use.
0xbba	78.110	Cannot read boot sector.
0xbbb	78.110	Volume Serial Number is %1-%2
0xbbc	78.110	Volume label (11 characters, ENTER for none)?
0xbbd	78.110	Invalid characters in volume label
0xbbe	78.110	There are no readable file allocation tables (FAT).
0xbbf	78.110	Some file allocation tables (FAT) are unreadable.
0xbc0	78.110	Cannot write boot sector.
0xbc1	78.110	Some file allocation tables (FAT) are unwriteable.
0xbc2	78.110	Insufficient disk space.
0xbc3	78.110	%1 KB total disk space.
0xbc4	78.110	%1 KB are available.
0xbc5	78.110	Disk not formatted or not FAT.
0xbc6	78.110	Required parameter missing -
0xbc7	78.110	The type of the file system is %1.
0xbc8	78.110	The new file system is %1.
0xbc9	78.110	An error occurred while running Format.
0xbca	78.110	%1 is not available for %2 drives.
0xbcb	78.110	Cannot determine file system of drive %1.
0xbcc	78.110	Cannot dismount the drive.
0xbcd	78.110	%1 is not a complete name.
0xbce	78.110	Yes
0xbcf	78.110	No
0xbd0	78.110	Disk is not formatted.
0xbd1	78.110	Specified drive does not exist.
0xbd2	78.110	Invalid parameter - %1
0xbd3	78.110	Out of memory.
0xbd4	78.110	Access denied - %1
0xbd5	10	Access Denied as you do not have sufficient privileges or the disk may be locked by another process. You have to invoke this utility running in elevated mode and make sure the disk is unlocked.
0xbd6	78.110	Cannot lock current drive.
0xbd7	78.110	Invalid volume label
0xbd8	78.110	The disk is too large to format for the specified file system.
0xbd9	78.110	Volume label (32 characters, ENTER for none)?
0xbda	78.110	Chkdsk cannot run because the volume is in use by another process. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
0xbdb	78.110	Chkdsk could not schedule this volume to be checked the next time the system restarts.
0xbdc	78.110	This volume will be checked the next time the system restarts.
0xbdd	78.110	Compression is not available for %1.
0xbde	78.110	Cannot enable compression for the volume.
0xbdf	78.110	Compression is not supported on volumes with clusters larger than 4096 bytes.
0xbe0	78.110	Cannot unlock the drive.
0xbe1	78.110	Chkdsk cannot run because the volume is in use by another process. Chkdsk may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? (Y/N)
0xbe2	78.110	Volume dismounted. All opened handles to this volume are now invalid.
0xbe3	78.110	Chkdsk cannot dismount the volume because it is a system drive or there is an active paging file on it. Would you like to schedule this volume to be checked the next time the system restarts? (Y/N)
0xbe4	78.110	%1 MB total disk space.
0xbe5	78.110	%1 MB are available.
0xbe6	78.110	The volume is in use by another process. Chkdsk might report errors when no corruption is present.
0xbe7	78.110	The device is offline.
0xbe8	78.110	The target of the symbolic link %1 does not exist
0xbe9	78.110	The target volume does not support symbolic links
0xbea	78.110	The media being formatted has been removed or has become invalid. Format aborted.
0xbeb	78.110	UDF version %1 is not supported.
0xbec	78.110	BitLocker encryption on the volume could not be removed. Format aborted.
0xbed	78.110	BitLocker encryption and the encrypted data on the volume has been removed. You may enable BitLocker again after formatting is complete.
0xbee	78.110	Label too big -- volume labels must be 32 or fewer characters.
0xbef	78.110	%1 GB total disk space.
0xbf0	78.110	%1 GB are available.
0xbf1	78.110	%1 TB total disk space.
0xbf2	78.110	%1 TB are available.
0xbf3	78.110	%1 PB total disk space.
0xbf4	78.110	%1 PB are available.
0xbf5	78.110	%1 EB total disk space.
0xbf6	78.110	%1 EB are available.
0xbf7	78.110	%1 bytes total disk space.
0xbf8	78.110	%1 bytes are available.
0xbf9	78.110	Short file name enable/disable is not available for %1.
0xbfa	8.110	Integrity is not available for %1.
0xbfb	8.110	Cannot enable integrity for the volume.
0x1388	78.110	Errors in file allocation table (FAT) corrected.
0x1389	78.110	Extended attribute file has handle. Handle removed.
0x138a	78.110	Extended attribute file contains no extended attributes. File deleted.
0x138b	78.110	Erasing invalid label.
0x138c	78.110	%1 bytes in extended attributes.
0x138d	78.110	Unreadable extended attribute header. Cannot check extended attribute log.
0x138e	78.110	Extended attribute log is unintelligible. Ignore log and continue? (Y/N)
0x138f	78.110	Unused, unreadable, or unwriteable portion of extended attribute file removed.
0x1390	78.110	Total size entry for extended attribute set at cluster %1 corrected.
0x1391	78.110	Need count entry for extended attribute set at cluster %1 corrected.
0x1392	78.110	Extended attribute file is unsorted. Sorting extended attribute file.
0x1393	78.110	Insufficient space in extended attribute file for its header. Attempting to allocate more disk space.
0x1394	78.110	Insufficient disk space to correct disk error. Please free some disk space and run CHKDSK again.
0x1395	78.110	Bad clusters in extended attribute file header relocated.
0x1396	78.110	Errors in extended attribute file header corrected.
0x1397	78.110	More than one dot entry in folder %1. Entry removed.
0x1398	78.110	Dot entry found in root folder. Entry removed.
0x1399	78.110	Dot-dot entry found in root folder. Entry removed.
0x139a	78.110	Dot entry in folder %1 has incorrect link. Link corrected.
0x139b	78.110	Dot-dot entry in folder %1 has incorrect link. Link corrected.
0x139c	78.110	More than one %1 entry in folder %2. Entry removed.
0x139d	78.110	Folder %1 causes cycle in folder structure. Folder entry removed.
0x139e	78.110	Folder %1 has bad clusters. Bad clusters removed from folder.
0x139f	78.110	Folder %1 is entirely unreadable. Folder entry removed.
0x13a0	78.110	%1
0x13a1	78.110	Folder truncated.
0x13a2	78.110	Cross link resolved by copying.
0x13a3	78.110	Insufficient disk space to copy cross-linked portion. File being truncated.
0x13a4	78.110	%1 Invalid name. Folder entry removed.
0x13a5	78.110	%1 Invalid time stamp.
0x13a6	78.110	%1 Folder has non-zero file size.
0x13a7	78.110	%1 Unrecognized extended attribute handle.
0x13a8	78.110	%1 Has handle extended attribute set belonging to another file. Handle removed.
0x13a9	78.110	Unused extended attribute set with handle %1 deleted from extended attribute file.
0x13aa	78.110	Extended attribute set with handle %1 owner changed from %2 to %3.
0x13ab	78.110	Bad links in lost chain at cluster %1 corrected.
0x13ac	78.110	Lost chain cross-linked at cluster %1. Orphan truncated.
0x13ad	78.110	Insufficient disk space to recover lost data.
0x13ae	78.110	Insufficient disk space to recover lost data.
0x13af	78.110	Error in extended attribute log.
0x13b0	78.110	%1 Errors in . and/or .. corrected.
0x13b1	78.110	More than one %1 entry in folder %2. Renamed to %3 but still could not resolve the name conflict.
0x13b2	78.110	More than one %1 entry in folder %2. Renamed to %3.
0x13b3	78.110	%1 may be an invalid name in folder %2.
0x13b4	78.110	Corrected name %1 in folder %2.
0x13b5	78.110	Invalid media byte.
0x13b6	78.110	Repaired extended attributes.
0x13b7	78.110	Bad sectors found.
0x13b8	78.110	Detected minor inconsistencies on the drive. This is not a corruption.
0x13b9	78.110	Cleaning up minor inconsistencies on the drive.
0x1770	78.110	Creates, changes, or deletes the volume label of a disk.
0x1771	78.110	LABEL [drive:][label] LABEL [/MP] [volume] [label] drive: Specifies the drive letter of a drive. label Specifies the label of the volume. /MP Specifies that the volume should be treated as a mount point or volume name. volume Specifies the drive letter (followed by a colon), mount point, or volume name. If volume name is specified, the /MP flag is unnecessary.
0x1772	78.110	Volume in drive %1 has no label
0x1773	78.110	Volume in drive %1 is %2
0x1775	78.110	Delete current volume label (Y/N)?
0x1776	78.110	Cannot change label on this volume. The request is not supported.
0x1777	78.110	Invalid drive specification.
0x1778	78.110	The given volume name does not have a mount point or drive letter.
0x1779	78.110	Cannot change label. This volume is write protected.
0x177a	78.110	Volume label cannot be added because the root directory on this volume is full.
0x177b	78.110	Volume label change cancelled.
0x1b5c	78.110	File not found - %1
0x1b5d	78.110	Path not found - %1
0x1b5e	78.110	Parameter format not correct -
0x1b5f	78.110	Not resetting system file - %1
0x1b60	78.110	Not resetting hidden file - %1
0x1b62	10	Displays or changes file attributes. ATTRIB [+R \| -R] [+A \| -A] [+S \| -S] [+H \| -H] [+O \| -O] [+I \| -I] [+X \| -X] [+P \| -P] [+U \| -U] [drive:][path][filename] [/S [/D]] [/L] + Sets an attribute. - Clears an attribute. R Read-only file attribute. A Archive file attribute. S System file attribute. H Hidden file attribute. O Offline attribute. I Not content indexed file attribute. X No scrub file attribute. V Integrity attribute. P Pinned attribute. U Unpinned attribute. B SMR Blob attribute. [drive:][path][filename] Specifies a file or files for attrib to process. /S Processes matching files in the current folder and all subfolders. /D Processes folders as well. /L Work on the attributes of the Symbolic Link versus the target of the Symbolic Link
0x1b64	78.110	Invalid switch - %1
0x1b65	78.110	Access denied - %1
0x1b66	78.110	Unable to change attribute - %1
0x2af8	78.110	Invalid switch - /%1
0x2af9	78.110	Invalid path - %1
0x2afa	78.110	No subfolders exist %1
0x2afb	78.110	Folder PATH listing
0x2afc	78.110	Folder PATH listing for volume %1
0x2afd	78.110	Volume serial number is %1-%2
0x2afe	78.110	Volume serial number is %1 %2:%3
0x2aff	78.110	Graphically displays the folder structure of a drive or path. TREE [drive:][path] [/F] [/A] /F Display the names of the files in each folder. /A Use ASCII instead of extended characters.
0x2b03	78.110	Parameter format not correct - %1
0x2b04	78.110	Too many parameters - %1
0x2b05	78.110	Invalid drive specification
0x2b06	78.110	Not enough memory.
0x2ee0	78.110	FIND:
0x2ee1	78.110	FIND: Incorrect Windows XP version
0x2ee2	78.110	FIND: Invalid switch
0x2ee3	78.110	FIND: Parameter format not correct
0x2ee4	78.110	Searches for a text string in a file or files. FIND [/V] [/C] [/N] [/I] [/OFF[LINE]] "string" [[drive:][path]filename[ ...]] /V Displays all lines NOT containing the specified string. /C Displays only the count of lines containing the string. /N Displays line numbers with the displayed lines. /I Ignores the case of characters when searching for the string. /OFF[LINE] Do not skip files with offline attribute set. "string" Specifies the text string to find. [drive:][path]filename Specifies a file or files to search. If a path is not specified, FIND searches the text typed at the prompt or piped from another command.
0x2ee5	78.110	FIND: Required parameter missing
0x2ee6	78.110	File not found - %1
0x2ee7	78.110	%1
0x2ee8	78.110	---------- %1: %2
0x2ee9	78.110	---------- %1
0x2eea	78.110	%1
0x2eeb	78.110	[%1]%2
0x2eec	78.110	Insufficient memory
0x2eed	78.110	Unable to read file
0x2eee	78.110	Files with offline attribute were skipped. Use /OFFLINE for not skipping such files.
0x32c8	78.110	Compares two files or sets of files and displays the differences between them FC [/A] [/C] [/L] [/LBn] [/N] [/OFF[LINE]] [/T] [/U] [/W] [/nnnn] [drive1:][path1]filename1 [drive2:][path2]filename2 FC /B [drive1:][path1]filename1 [drive2:][path2]filename2 /A Displays only first and last lines for each set of differences. /B Performs a binary comparison. /C Disregards the case of letters. /L Compares files as ASCII text. /LBn Sets the maximum consecutive mismatches to the specified number of lines. /N Displays the line numbers on an ASCII comparison. /OFF[LINE] Do not skip files with offline attribute set. /T Does not expand tabs to spaces. /U Compare files as UNICODE text files. /W Compresses white space (tabs and spaces) for comparison. /nnnn Specifies the number of consecutive lines that must match after a mismatch. [drive1:][path1]filename1 Specifies the first file or set of files to compare. [drive2:][path2]filename2 Specifies the second file or set of files to compare.
0x32c9	78.110	FC: Incompatible Switches
0x32ca	78.110	FC: Invalid Switch
0x32cb	78.110	FC: Insufficient number of file specifications
0x32cc	78.110	Comparing files %1 and %2
0x32cd	78.110	FC: cannot open %1 - No such file or folder
0x32ce	78.110	%1 %2 Could not expand second file name so as to match first
0x32cf	78.110	FC: no differences encountered
0x32d0	78.110	Comparing files %1 and %2
0x32d1	78.110	File(s) not found : %1
0x32d2	78.110	%1
0x32d3	78.110	%1: %2
0x32d4	78.110	***** %1
0x32d5	78.110	*****
0x32d6	78.110	FC: %1 longer than %2
0x32d7	78.110	Resync Failed. Files are too different.
0x32d8	78.110	FC: Unable to open %1. File unavailable for read access.
0x32d9	78.110	FC: Incorrect Windows XP Version
0x32da	78.110	...
0x32db	78.110	...
0x32dc	78.110	%1: %2 %3
0x32dd	78.110	FC: Out of memory
0x32de	78.110	Files with offline attribute were skipped. Use /OFFLINE for not skipping such files.
0x36b0	10	Compares the contents of two files or sets of files. COMP [data1] [data2] [/D] [/A] [/L] [/N=number] [/C] [/OFF[LINE]] [/M] data1 Specifies location and name(s) of first file(s) to compare. data2 Specifies location and name(s) of second files to compare. /D Displays differences in decimal format. /A Displays differences in ASCII characters. /L Displays line numbers for differences. /N=number Compares only the first specified number of lines in each file. /C Disregards case of ASCII letters when comparing files. /OFF[LINE] Do not skip files with offline attribute set. /M Do not prompt for compare more files. To compare sets of files, use wildcards in data1 and data2 parameters.
0x36b1	78.110	Files compare OK
0x36b2	78.110	No memory available.
0x36b3	78.110	Can't find/open file: %1
0x36b4	78.110	Can't read file: %1
0x36b5	78.110	Bad command line syntax
0x36b6	78.110	Bad numeric argument: %1
0x36b7	78.110	Compare error at %1 %2 file1 = %3 file2 = %4
0x36b8	78.110	Name of first file to compare:
0x36b9	78.110	Name of second file to compare:
0x36ba	78.110	Option:
0x36bb	78.110	Comparing %1 and %2...
0x36bc	78.110	Files are different sizes.
0x36bd	78.110	Format for /n switch is /n=XXXX
0x36be	78.110	Compare more files (Y/N) ?
0x36bf	78.110	%1 %2 Could not expand second file name so as to match first
0x36c0	78.110	10 mismatches - ending compare
0x36c1	78.110	Incorrect Windows XP version
0x36c2	78.110	Unexpected end of file
0x36c3	78.110	Invalid switch - %1
0x36c4	78.110	File1 only has %1 lines
0x36c5	78.110	File2 only has %1 lines
0x36c6	78.110	.
0x36c7	78.110	OFFSET
0x36c8	78.110	LINE
0x36c9	78.110	Files with offline attribute were skipped. Use /OFFLINE for not skipping such files.
0x3a98	78.110	File not found
0x3a99	78.110	Cannot RECOVER an ASSIGNed or SUBSTed drive
0x3a9a	78.110	Invalid drive or file name
0x3a9c	78.110	Cannot RECOVER a network drive
0x3a9d	78.110	%1 file(s) recovered.
0x3a9e	78.110	%1 of %2 bytes recovered.
0x3a9f	78.110	Press ENTER to begin recovery of the file on drive %1
0x3aa0	78.110	Cannot read the file allocation table (FAT).
0x3aa1	78.110	Cannot write the file allocation table (FAT).
0x3aa2	78.110
0x3aa3	78.110	Recovers readable information from a bad or defective disk.
0x3aa4	78.110	RECOVER [drive:][path]filename
0x3aa5	78.110	RECOVER drive:
0x3aa6	78.110	Consult the online Command Reference in Windows Help before using the RECOVER command.
0x3aa9	78.110	Write error.
0x3aaa	78.110	Internal consistency error.
0x3aab	78.110	Read error.
0x3aac	78.110	RECOVER on an entire volume is no longer supported. To get equivalent functionality use CHKDSK.
0x3ac3	78.110	NTFS RECOVER has detected that the volume is corrupt. Run CHKDSK /f to fix it.
0x3ac4	78.110	NTFS Recover could not write elementary disk structures. The volume may be corrupt; run CHKDSK /f to fix it.
0x3ac5	78.110	Files on this volume cannot be recovered with this version of UNTFS.DLL.
0x3c29	78.110	NTFS RECOVER cannot be used to recover system files. Use CHKDSK instead.
0x3c2a	78.110	NTFS RECOVER failed.
0x3e80	78.110	Invalid switch - %1
0x3e81	78.110	Switch %1 is not implemented
0x3e82	78.110	No file to print
0x3e83	78.110	Unable to initialize device %1
0x3e84	78.110	Can't find file %1
0x3e85	78.110	%1 is currently being printed
0x3e86	78.110	Prints a text file. PRINT [/D:device] [[drive:][path]filename[...]] /D:device Specifies a print device.
0x4268	78.110	Provides help information for Windows XP commands. HELP [command] command - displays help information on that command.
0x4269	78.110	Help file could not be found.
0x426a	78.110	Error reading help file.
0x426b	78.110	For more information on a specific command, type HELP command-name.
0x426c	78.110	This command is not supported by the help utility. Try "%1 /?".
0x4272	78.110	Incorrect Windows XP version
0x4273	78.110	--- MORE ---
0x4274	78.110	Insufficient memory.
0x4e21	78.110	MORE
0x4e34	78.110	-- More %1%2%3 -- %4
0x4e35	78.110	(%1%)
0x4e36	78.110	[Line: %1]
0x4e37	78.110	[Options: psfq=]
0x4e38	78.110	Lines:
0x4e3e	78.110	P
0x4e3f	78.110	S
0x4e40	78.110	=
0x4e41	78.110	Q
0x4e42	78.110	?
0x4e43	78.110	H
0x4e44	78.110	F
0x4e48	78.110	Displays output one screen at a time. MORE [/E [/C] [/P] [/S] [/Tn] [+n]] < [drive:][path]filename command-name \| MORE [/E [/C] [/P] [/S] [/Tn] [+n]] MORE /E [/C] [/P] [/S] [/Tn] [+n] [files] [drive:][path]filename Specifies a file to display one screen at a time. command-name Specifies a command whose output will be displayed. /E Enable extended features /C Clear screen before displaying page /P Expand FormFeed characters /S Squeeze multiple blank lines into a single line /Tn Expand tabs to n spaces (default 8) Switches can be present in the MORE environment variable. +n Start displaying the first file at line n files List of files to be displayed. Files in the list are separated by blanks. If extended features are enabled, the following commands are accepted at the -- More -- prompt: P n Display next n lines S n Skip next n lines F Display next file Q Quit = Show line number ? Show help line Display next page Display next line
0x4e52	78.110	Internal error.
0x4e53	78.110	Too many arguments in command line.
0x4e54	78.110	Not enough memory.
0x4e55	78.110	Cannot access file %1
0x4e56	78.110	Invalid registry entry.
0x521c	78.110	Replacing %1
0x521d	78.110	Adding %1
0x521e	78.110	%1 file(s) replaced
0x521f	78.110	%1 file(s) added
0x5220	78.110	No files replaced
0x5221	78.110	No files added
0x5222	78.110	Press any key to continue . . .
0x5223	78.110	Replace %1? (Y/N)
0x5224	78.110	Add %1? (Y/N)
0x5225	78.110	Replaces files. REPLACE [drive1:][path1]filename [drive2:][path2] [/A] [/P] [/R] [/W] REPLACE [drive1:][path1]filename [drive2:][path2] [/P] [/R] [/S] [/W] [/U] [drive1:][path1]filename Specifies the source file or files. [drive2:][path2] Specifies the directory where files are to be replaced. /A Adds new files to destination directory. Cannot use with /S or /U switches. /P Prompts for confirmation before replacing a file or adding a source file. /R Replaces read-only files as well as unprotected files. /S Replaces files in all subdirectories of the destination directory. Cannot use with the /A switch. /W Waits for you to insert a disk before beginning. /U Replaces (updates) only files that are older than source files. Cannot use with the /A switch.
0x523a	78.110	Incorrect Windows version
0x523b	78.110	Source path required
0x523c	78.110	File cannot be copied onto itself
0x523d	78.110	Insufficient disk space
0x523e	78.110	No files found - %1
0x523f	78.110	Extended Error %1
0x5240	78.110	Parse Error %1
0x5241	78.110	Out of memory
0x5242	78.110	Invalid switch - %1
0x5243	78.110	Invalid parameter combination
0x5244	78.110	Path not found - %1
0x5245	78.110	Access denied - %1
0x55f0	78.110	The /Z and /O (or /X) options conflict: cannot copy security in restartable mode.
0x560f	78.110	Insufficient memory
0x5610	78.110	Invalid parameter - %1
0x5612	78.110	Invalid path
0x5613	78.110	Cannot perform a cyclic copy
0x5614	78.110	Invalid date
0x5615	78.110	Unable to create directory
0x5616	78.110	Invalid drive specification
0x5617	78.110	Cannot XCOPY from a reserved device
0x5618	78.110	Access denied
0x5619	78.110	Too many open files
0x561a	78.110	General failure
0x561b	78.110	Sharing violation
0x561c	78.110	Lock violation
0x561d	78.110	Path not found
0x561e	78.110	Insufficient disk space
0x561f	78.110	File cannot be copied onto itself
0x5620	78.110	Invalid number of parameters
0x5621	78.110	Unable to create directory - %1
0x5622	78.110	File not found - %1
0x5623	78.110	File creation error - %1
0x5624	78.110	Invalid switch
0x5625	78.110	Invalid Path, not all directories/files copied
0x5626	78.110	Extended Error %1
0x5627	78.110	Parse Error
0x5628	78.110	Write protect error accessing drive.
0x5629	78.110	Invalid switch - %1
0x562c	10	Copies files and directory trees. XCOPY source [destination] [/A \| /M] [/D[:date]] [/P] [/S [/E]] [/V] [/W] [/C] [/I] [/Q] [/F] [/L] [/G] [/H] [/R] [/T] [/U] [/K] [/N] [/O] [/X] [/Y] [/-Y] [/Z] [/B] [/J] [/EXCLUDE:file1[+file2][+file3]...] [/COMPRESS] source Specifies the file(s) to copy. destination Specifies the location and/or name of new files. /A Copies only files with the archive attribute set, doesn't change the attribute. /M Copies only files with the archive attribute set, turns off the archive attribute. /D:m-d-y Copies files changed on or after the specified date. If no date is given, copies only those files whose source time is newer than the destination time. /EXCLUDE:file1[+file2][+file3]... Specifies a list of files containing strings. Each string should be in a separate line in the files. When any of the strings match any part of the absolute path of the file to be copied, that file will be excluded from being copied. For example, specifying a string like \obj\ or .obj will exclude all files underneath the directory obj or all files with the .obj extension respectively. /P Prompts you before creating each destination file. /S Copies directories and subdirectories except empty ones. /E Copies directories and subdirectories, including empty ones. Same as /S /E. May be used to modify /T. /V Verifies the size of each new file. /W Prompts you to press a key before copying. /C Continues copying even if errors occur. /I If destination does not exist and copying more than one file, assumes that destination must be a directory. /Q Does not display file names while copying. /F Displays full source and destination file names while copying. /L Displays files that would be copied. /G Allows the copying of encrypted files to destination that does not support encryption. /H Copies hidden and system files also. /R Overwrites read-only files. /T Creates directory structure, but does not copy files. Does not include empty directories or subdirectories. /T /E includes empty directories and subdirectories. /U Copies only files that already exist in destination. /K Copies attributes. Normal Xcopy will reset read-only attributes. /N Copies using the generated short names. /O Copies file ownership and ACL information. /X Copies file audit settings (implies /O). /Y Suppresses prompting to confirm you want to overwrite an existing destination file. /-Y Causes prompting to confirm you want to overwrite an existing destination file. /Z Copies networked files in restartable mode. /B Copies the Symbolic Link itself versus the target of the link. /J Copies using unbuffered I/O. Recommended for very large files. /COMPRESS Request network compression during file transfer where applicable. The switch /Y may be preset in the COPYCMD environment variable. This may be overridden with /-Y on the command line.
0x562d	78.110	Press any key when ready to begin copying file(s)
0x562e	78.110	%1 (Y/N)?
0x562f	78.110	Does %1 specify a file name or directory name on the target (F = file, D = directory)?
0x5630	78.110	%1 File(s) copied
0x5632	78.110	%1 -> %2
0x5633	78.110	Insufficient disk space on current disk. Insert another disk and type to continue...
0x5636	78.110	F
0x5637	78.110	D
0x5638	78.110	Y
0x5639	78.110	N
0x563a	78.110	%1 File(s)
0x563b	78.110	File verification failed.
0x563c	78.110	A
0x563d	78.110	Overwrite %1 (Yes/No/All)?
0x563e	78.110	File path is too long to be displayed.
0x563f	78.110	Insufficient privilege to perform the operation or access denied.
0x5640	78.110	Encryption failed.
0x5641	78.110	Security Information not supported by destination file system.
0x5642	78.110	Unknown error.
0x5643	78.110	Source directory may be changing. XCOPY may not be able to copy all files or directories within the directory.
0x5644	78.110	Insufficient stack space.
0x5645	78.110	%1 -> %2 (Y/N)?
0x5646	8.110	Pathname exceeded 256 characters.
0x5647	8.110	Source pathname exceeded 256 characters.
0x5648	8.110	Destination pathname exceeded 256 characters.
0x5a0a	78.110	LPT%1: rerouted to COM%2:
0x5a0b	78.110	Active code page for device %1 is %2
0x5a0c	78.110	Configures system devices. Serial port: MODE COMm[:] [BAUD=b] [PARITY=p] [DATA=d] [STOP=s] [to=on\|off] [xon=on\|off] [odsr=on\|off] [octs=on\|off] [dtr=on\|off\|hs] [rts=on\|off\|hs\|tg] [idsr=on\|off] Device Status: MODE [device] [/STATUS] Redirect printing: MODE LPTn[:]=COMm[:] Select code page: MODE CON[:] CP SELECT=yyy Code page status: MODE CON[:] CP [/STATUS] Display mode: MODE CON[:] [COLS=c] [LINES=n] Typematic rate: MODE CON[:] [RATE=r DELAY=d]
0x5a0d	78.110	Status for device *:
0x5a0f	78.110	Baud: %1
0x5a10	78.110	Parity: %1
0x5a11	78.110	Data Bits: %1
0x5a12	78.110	Stop Bits: %1
0x5a13	78.110	Timeout: %1
0x5a14	78.110	XON/XOFF: %1
0x5a15	78.110	CTS handshaking: %1
0x5a16	78.110	DSR handshaking: %1
0x5a17	78.110	DSR sensitivity: %1
0x5a18	78.110	DTR circuit: %1
0x5a19	78.110	RTS circuit: %1
0x5a1e	78.110	Lines: %1
0x5a1f	78.110	Columns: %1
0x5a20	78.110	Code page: %1
0x5a21	78.110	Printer output is being rerouted to serial port %1
0x5a22	78.110	Printer output is not being rerouted.
0x5a23	78.110	Keyboard rate: %1
0x5a24	78.110	Keyboard delay: %1
0x5a27	78.110	To change printer settings use the Printers option in Control Panel
0x5a28	78.110	Incorrect operating system version
0x5a29	78.110	Illegal device name - %1
0x5a2a	78.110	Invalid baud rate specified
0x5a2b	78.110	%1: not rerouted
0x5a2c	78.110	Invalid parameter - %1
0x5a2d	78.110	Invalid number of parameters
0x5a2e	78.110	Failure to access device: %1
0x5a2f	78.110	Code page operation not supported on this device
0x5a30	78.110	Current keyboard does not support this code page
0x5a31	78.110	Out of memory
0x5a32	78.110	Parse Error
0x5a33	78.110	Extended error %1
0x5a34	78.110	The specified options are not supported by this serial device
0x5a35	78.110	The screen cannot be set to the number of lines and columns specified.
0x5a36	78.110	The device cannot be set to the specified number of lines and/or columns.
0x5a37	78.110	Cannot stop printer rerouting at this time.
0x5a38	78.110	Cannot reroute printer output to serial device %1.
0x5a39	78.110	Invalid keyboard rate
0x5a3a	78.110	Invalid keyboard delay
0x5a3b	78.110	The number of lines and columns cannot be changed in a full screen.
0x5a3c	78.110	The code page specified is not valid.
0x5a3d	78.110	The specified option is not supported.
0x5a46	78.110	Default to even parity.
0x5a47	78.110	Default to %1 data bits.
0x5a48	78.110	Default to %1 stop bits.
0x5a49	78.110	No serial port setting changed.
0x5a4a	78.110	This operation is not necessary under the current version of Windows.
0x5a4b	78.110	Device %1 is not currently available.
0x5dc0	78.110	The first NTFS boot sector is unreadable or corrupt. Reading second NTFS boot sector instead.
0x5dc1	78.110	All NTFS boot sectors are unreadable or corrupt. Cannot continue.
0x5dc2	78.110	The second NTFS boot sector is unwriteable.
0x5dc3	78.110	The first NTFS boot sector is unwriteable.
0x5dc4	78.110	All NTFS boot sectors are unwriteable. Cannot continue.
0x5dc5	78.110	The NTFS file system does not function on floppy disks.
0x6590	78.110	Deleting corrupt file record segment %1.
0x6591	10	Deleting corrupt attribute record (0x%1, %2) from file record segment 0x%3.
0x6592	78.110	Truncating badly linked attribute records from file record segment %1.
0x6593	78.110	Sorting attribute records for file record segment %1.
0x6594	78.110	Deleting duplicate attribute records (%1, %2) from file record segment %3.
0x6595	78.110	Deleted corrupt attribute list for file %1.
0x6596	78.110	Deleted unreadable attribute list for file %1.
0x6597	78.110	Deleted corrupt attribute list entry with type code %1 in file %2.
0x6598	78.110	Truncating corrupt attribute list for file %1.
0x6599	78.110	Sorting attribute list for file %1.
0x659a	78.110	Unreadable master file table. CHKDSK aborted.
0x659b	78.110	Corrupt master file table. CHKDSK aborted.
0x659c	78.110	Corrupt Attribute Definition Table. CHKDSK is assuming the default.
0x659d	78.110	Unable to determine volume version and state. CHKDSK aborted.
0x659e	78.110	File record segment %1 is unreadable.
0x659f	78.110	Deleting orphan file record segment %1.
0x65a0	78.110	Insufficient disk space to hotfix unreadable system file %1. CHKDSK Aborted.
0x65a1	78.110	Insufficient disk space to hotfix unreadable file %1.
0x65a2	78.110	First free byte offset corrected in file record segment %1.
0x65a3	78.110	Correcting errors in the Master File Table (MFT) mirror.
0x65a4	78.110	Insufficient disk space to repair master file table (MFT) mirror. CHKDSK aborted.
0x65a5	78.110	Insufficient disk space to record bad clusters.
0x65a6	78.110	Correcting errors in the master file table's (MFT) DATA attribute.
0x65a7	78.110	Insufficient disk space to fix master file table (MFT). CHKDSK aborted.
0x65a8	78.110	Correcting errors in the master file table's (MFT) BITMAP attribute.
0x65a9	78.110	Insufficient disk space to fix volume bitmap. CHKDSK aborted.
0x65aa	78.110	Correcting errors in the Volume Bitmap.
0x65ab	78.110	Correcting errors in the Attribute Definition Table.
0x65ac	78.110	Insufficient disk space to fix the attribute definition table. CHKDSK aborted.
0x65ad	78.110	Correcting errors in the Bad Clusters File.
0x65ae	78.110	Insufficient disk space to fix the bad clusters file. CHKDSK aborted.
0x65af	78.110	Correcting errors in the Boot File.
0x65b0	78.110	Insufficient disk space to fix the boot file. CHKDSK aborted.
0x65b1	78.110	Adding %1 bad clusters to the Bad Clusters File.
0x65b2	78.110	%1 KB total disk space.
0x65b3	78.110	%1 KB in %2 files.
0x65b4	78.110	%1 KB in %2 indexes.
0x65b5	78.110	%1 KB in bad sectors.
0x65b6	78.110	%1 KB in use by the system.
0x65b7	78.110	%1 KB available on disk.
0x65b8	78.110	Correcting error in index %2 for file %1.
0x65b9	78.110	Insufficient disk space to correct errors in index %2 of file %1.
0x65ba	78.110	Removing corrupt index %2 in file %1.
0x65bb	78.110	Deleting directory entries in %1
0x65bc	78.110	CHKDSK cannot delete all corrupt directory entries.
0x65bd	78.110	CHKDSK is recovering lost files.
0x65be	78.110	Insufficient disk space for CHKDSK to recover lost files.
0x65bf	78.110	Correcting error in directory %1
0x65c0	78.110	Sorting index %2 in file %1.
0x65c1	78.110	Correcting extended attribute information in file %1.
0x65c2	78.110	Deleting corrupt extended attribute set in file %1.
0x65c3	78.110	Incorrect duplicate information in file %1.
0x65c4	78.110	CHKDSK is creating new root directory.
0x65c5	78.110	Insufficient disk space to create new root directory.
0x65c6	78.110	Recovering orphaned file %1 (%2) into directory file %3.
0x65c7	78.110	Insufficient disk space to recover lost data.
0x65c8	78.110	Too much lost data to recover it all.
0x65c9	78.110	Fixing critical master file table (MFT) files with MFT mirror.
0x65ca	78.110	Fixing incorrect information in file record segment %1.
0x65cb	8.110	Corrupt uppercase Table -- aborting. Run "chkdsk /f" to repair.
0x65cc	78.110	Cannot retrieve current system uppercase table. CHKDSK aborted.
0x65cd	78.110	CHKDSK discovered free space marked as allocated in the master file table (MFT) bitmap.
0x65ce	78.110	CHKDSK discovered free space marked as allocated in the volume bitmap.
0x65cf	78.110	Correcting errors in the uppercase file.
0x65d0	78.110	Insufficient disk space to fix the uppercase file. CHKDSK aborted.
0x65d1	78.110	Deleting index entry %3 in index %2 of file %1.
0x65d2	78.110	Verbose output not supported by NTFS CHKDSK.
0x65d3	10	WARNING! /F parameter not specified. Running CHKDSK in read-only mode.
0x65d4	78.110	Errors found. CHKDSK cannot continue in read-only mode.
0x65d5	78.110	Correcting cycles in directory tree. Breaking links between parent file %1 and child file %2.
0x65d6	78.110	Correcting minor file name errors in file %1.
0x65d7	78.110	Inserting data attribute into file %1.
0x65d8	78.110	Insufficient disk space to insert missing data attribute.
0x65d9	78.110	Correcting errors in the Log File.
0x65da	78.110	Insufficient disk space to fix the log file. CHKDSK aborted.
0x65db	78.110	CHKDSK is verifying files (stage %1 of %2)...
0x65dc	78.110	CHKDSK is verifying indexes (stage %1 of %2)...
0x65dd	78.110	Index verification completed.
0x65de	78.110	File verification completed.
0x65df	78.110	CHKDSK is verifying security descriptors (stage %1 of %2)...
0x65e0	78.110	Security descriptor verification completed.
0x65e1	78.110	Replacing missing or invalid security descriptor for file %1.
0x65e2	78.110	Insufficient disk space for security descriptor for file %1.
0x65e3	78.110	This volume cannot be checked with this version of UNTFS.DLL.
0x65e4	78.110	Deleting an index entry from index %2 of file %1.
0x65e5	78.110	Correcting cross-link for file %1.
0x65e6	78.110	CHKDSK is verifying file data (stage %1 of %2)...
0x65e7	78.110	File data verification completed.
0x65e8	78.110	Index entries referencing file %1 will not be validated because this file contains too many file names.
0x65e9	78.110	CHKDSK is resetting recovery information...
0x65ea	78.110	CHKDSK is resetting the log file.
0x65eb	78.110	CHKDSK is adjusting the size of the log file.
0x65ec	78.110	CHKDSK was unable to adjust the size of the log file.
0x65ed	78.110	Cleaning up instance tags for file %1.
0x65ee	78.110	Fixing corrupt attribute record (%1, %2) in file record segment %3.
0x65ef	78.110	%1 KB occupied by the log file.
0x65f0	78.110	Readable file record segment %1 is not writeable.
0x65f1	78.110	Inserting default quota record into index %2 in file %1.
0x65f2	78.110	Creating a default security descriptor.
0x65f3	78.110	Unable to set the quota out of date flag.
0x65f4	78.110	Repairing an index entry in index %2 of file %1.
0x65f5	78.110	Inserting an index entry into index %2 of file %1.
0x65f6	78.110	Insufficient disk space to fix the security descriptors data stream.
0x65f7	78.110	Unable to write to attribute %1 of file %2.
0x65f8	78.110	Unable to read the security descriptors data stream.
0x65f9	78.110	Fixing mirror copy of the security descriptors data stream.
0x65fa	78.110	Fixing collation rule value for index %1 of file %2.
0x65fb	78.110	Creating index %1 for file %2.
0x65fc	78.110	Repairing the security file record segment.
0x65fd	78.110	Repairing the unreadable security descriptors data stream.
0x65fe	78.110	Insufficient disk space to fix the object id file.
0x65ff	78.110	Insufficient disk space to fix the quota file.
0x6600	78.110	Creating object id file.
0x6601	78.110	Creating quota file.
0x6602	78.110	Fixing flags for file record segment %1.
0x6603	78.110	Unable to correct an error in system file %1.
0x6604	78.110	Unable to create index %1 for file %2.
0x6605	78.110	Replacing invalid security id with default security id for file %1.
0x6606	78.110	Multiple quota files found. Ignoring extra quota files.
0x6607	78.110	Multiple object id files found. Ignoring extra object id files.
0x6608	78.110	The size specified for the log file is too big.
0x6609	78.110	The current log file size is %1 KB. The default log file size for this volume is %2 KB.
0x660b	8.110	CHKDSK discovered free space marked as allocated in the bitmap for index %2 for file %1.
0x660c	78.110	The size specified for the log file is too small.
0x660d	78.110	%1%2.
0x660e	78.110	Correcting file name errors in system file record segment %1.
0x660f	78.110	Inserting an index entry with Id %3 into index %2 of file %1.
0x6610	78.110	Deleting an index entry with Id %3 from index %2 of file %1.
0x6611	78.110	Cleaning up %3 unused index entries from index %2 of file %1.
0x6612	78.110	Repairing an index entry with id %3 in index %2 of file %1.
0x6613	78.110	Correcting sparse file record segment %1.
0x6614	78.110	Deleting extended attribute set due to the presence of reparse point in file %1.
0x6615	78.110	Correcting reparse point file record segment %1.
0x6616	78.110	Correcting encrypted file record segment %1.
0x6617	78.110	Multiple Usn Journal file found. Ignoring extra Usn Journal files.
0x6618	78.110	Insufficient disk space to fix the Usn Journal file.
0x6619	78.110	Creating Usn Journal file.
0x661a	78.110	CHKDSK is verifying Usn Journal...
0x661b	78.110	Creating Usn Journal %1 data stream
0x661c	78.110	Insufficient disk space to fix the Usn Journal %1 data stream.
0x661d	78.110	Repairing Usn Journal %1 data stream.
0x661e	78.110	Unable to read the Usn Journal %1 data stream.
0x661f	78.110	Repairing Usn Journal file record segment.
0x6620	78.110	Usn Journal verification completed.
0x6621	78.110	CHKDSK is resetting Usn information...
0x6622	78.110	This version of NTFS volume cannot be downgraded.
0x6623	78.110	CHKDSK is determining if the volume is downgradeable...
0x6624	78.110	The volume is downgradeable.
0x6625	78.110	CHKDSK is downgrading the volume...
0x6626	78.110	Volume downgraded.
0x6627	78.110	Reparse point found in file record segment %1.
0x6628	78.110	Encrypted data stream found in file record segment %1.
0x6629	78.110	Sparse data stream found in file record segment %1.
0x662a	78.110	Unable to change the volume version.
0x662b	78.110	Unable to downgrade the volume.
0x662c	78.110	Updating the master file table's (MFT) DATA attribute.
0x662d	78.110	Updating the master file table's (MFT) BITMAP attribute.
0x662e	78.110	Updating the Volume Bitmap.
0x662f	78.110	Upgrading and downgrading the volume at the same time will have no effect.
0x6630	78.110	Property set found in file record segment %1.
0x6631	78.110	Multiple reparse file found. Ignoring extra reparse files.
0x6632	78.110	Insufficient disk space to fix the reparse point file.
0x6633	78.110	Creating reparse point file.
0x6634	78.110	Missing object id index entry or duplicate object id detected for file record segment %1.
0x6635	78.110	Insufficient disk space to insert the index entry.
0x6636	10	WARNING! /I parameter specified.
0x6637	10	WARNING! /C parameter specified.
0x6638	78.110	Your drive may still be corrupt even after running CHKDSK.
0x6639	78.110	%1 MB total disk space.
0x663a	78.110	%1 MB in %2 files.
0x663b	78.110	%1 MB in %2 indexes.
0x663c	78.110	%1 MB in bad sectors.
0x663d	78.110	%1 MB in use by the system.
0x663e	78.110	%1 MB available on disk.
0x663f	78.110	Unable to set chkdsk ran flag.
0x6640	78.110	Deleting USN Journal file.
0x6641	78.110	CHKDSK is verifying free space (stage %1 of %2)...
0x6642	78.110	Deleting duplicate object id from file record segment %1.
0x6643	78.110	Unable to create a thread with error code %1.
0x6644	78.110	%1
0x6645	78.110	Unable to collect logged messages.
0x6646	78.110	Unable to obtain a handle to the event log.
0x6647	78.110	Failed to transfer logged messages to the event log with status %1.
0x6648	78.110	Volume label is %1.
0x6649	78.110	Unable to set chkdsk ran once flag.
0x664a	10	Unable to clear chkdsk ran once flag on %1, error: 0x%2.
0x664b	78.110	Cleaning up %1 unused security descriptors.
0x664c	78.110	Detected minor inconsistencies on the drive. This is not a corruption.
0x664d	78.110	Cleaning up minor inconsistencies on the drive.
0x664e	78.110	Replacing bad clusters in logfile.
0x664f	8.110	The deleting of the USN Journal is in progress. Skipping USN Journal verification.
0x6650	78.110	CHKDSK was unable to adjust the size of the log file due to too much fragmentation within the volume.
0x6651	78.110	CHKDSK was unable to adjust the size of the log file. Please use the /f parameter as well.
0x6652	78.110	Attribute list found in the log file.
0x6653	78.110	There is not enough disk space to enlarge the logfile to the specified size.
0x6654	78.110	There is not enough disk space to enlarge the logfile to the default size.
0x6655	78.110	The current logfile size is too big.
0x6656	78.110	%1 MB of additional physical memory is needed to enable windows to check your disk at full speed.
0x6657	78.110	Index verification stage will be split into %1 passes.
0x6658	78.110	Windows is checking your disk with a slower index verification algorithm as commanded.
0x6659	78.110	Index verification stage cannot be split into %1 passes. It will be reduced.
0x665a	78.110	There are too many files and directories on this volume for windows to check your disk at full speed. Make sure the allowed user address space is set to a maximum.
0x665b	78.110	An attempt to split the index verification stage into %1 or less passes has failed. Windows will not be able to check your disk at full speed.
0x665c	78.110	Windows cannot adjust the size of the log file due to possible corruption. Please run CHKDSK with the /F (fix) option to correct these.
0x665d	78.110	Deleted invalid filename %1 (%3) in directory %2.
0x665e	78.110	File %1 has been orphaned since all its filenames were invalid Windows will recover the file in the orphan recovery phase.
0x665f	78.110	There are too many files and directories on this volume for windows to check your disk at full speed.
0x6660	78.110	Windows may not detect all cycles on your volume because the directory structure is too deep.
0x6661	78.110	Windows cannot recover master file table. CHKDSK aborted.
0x6662	78.110	Unreadable master file table. Windows will attempt to recover master file table from disk.
0x6663	78.110	Corrupt master file table. Windows will attempt to recover master file table from disk.
0x6664	78.110	Chkdsk was executed in read-only mode on a volume snapshot. %1
0x6665	78.110	Chkdsk was executed in read-only mode. A volume snapshot was not used. Extra errors and warnings may be reported as the volume may have changed during the chkdsk run. %1
0x6666	78.110	Chkdsk was executed in read/write mode. %1
0x6667	78.110	The "/L" option cannot be specified with the "/F" option. Only the "/L:" option may be used with the "/F" option. To display the log file size, use "CHKDSK /L" with no other options.
0x6668	78.110	CHKDSK is scanning unindexed files for reconnect to their original directory.
0x6669	78.110	CHKDSK is recovering remaining unindexed files.
0x666a	78.110	Insufficient memory for full index scan. Disabling index cycle analysis.
0x666b	8.110	Creating default security descriptor for undefined security ID %1.
0x666c	8.110	Security ID %1 was referenced in one or more file records but was not defined in the security descriptor stream.
0x666d	8.110	The "/verify" option cannot be specified with the "/F" option.
0x666e	8.110	The "/scan" option cannot be specified with the "/verify" option.
0x666f	8.110	The "/verify" option cannot be specified with the "/spotfix" option.
0x6670	8.110	The "/scan" option cannot be specified with the "/spotfix" option.
0x6671	8.110	Skipping further messages about recovering orphans.
0x6672	8.110	Chkdsk was executed in scan mode on a volume snapshot. %1
0x6673	8.110	Chkdsk was executed in spotfix mode on a read-write volume. %1
0x6674	8.110	Chkdsk was executed in verify mode on a volume snapshot. %1
0x6675	8.110	A snapshot error occured while scanning this drive. You can try again, but if this problem persists, run an offline scan and fix.
0x6676	8.110	A snapshot error occured while scanning this drive. Run an offline scan and fix.
0x6677	8.110	Read-only chkdsk found bad on-disk uppercase table - using system table.
0x6678	8.110	This operation can not be performed on a read-only volume.
0x6679	10	Chkdsk scan speed is being throttled to reduce impact on system and application performance. Given the number of files and directories on the drive, Windows can scan the drive more efficiently if it has more memory available. To enable Chkdsk to use all available system memory and increase scan performance, please use the /perf switch.
0x667a	10	Repairing invalid filename %1 (%3) in directory %2.
0x667b	10	Deleting invalid system file name %1 (%3) in directory %2.
0x667c	10	Repairing invalid system file name %1 (%3) in directory %2.
0x667d	10	Correcting system file name errors in file %1.
0x667e	10	Correcting total allocated size in attribute record (%1, %2) of file %3.
0x6978	78.110	Volume has 0x%1 file record segments which is more than 32 bits.
0x6979	78.110	The file name index present bit is not set for file 0x%1.
0x697a	78.110	The view index present bit is not set for file 0x%1.
0x697b	78.110	The system file bit is not set for file 0x%1.
0x697c	78.110	The %2 index is missing from file 0x%1.
0x697d	78.110	EA Information is incorrect. Actual On Disk PackedEaSize 0x%1 0x%4 NeedEaCount 0x%2 0x%5 UnpackedEaSize 0x%3 0x%6
0x697e	78.110	The EA INFORMATION attribute is not consistency with the EA DATA attribute for file 0x%1. EA INFORMATION equals 0x%2 while EA DATA equals 0x%3.
0x697f	78.110	The EA INFORMATION is not readable for file 0x%1.
0x6980	78.110	The EA INFORMATION size, 0x%2, in file 0x%1 is incorrect. The expected size is 0x%3.
0x6981	78.110	The EA DATA is not readable for file 0x%1.
0x6982	78.110	The EA DATA size, 0x%2, in file 0x%1 is incorrect. The expected size is 0x%3.
0x6983	78.110	%1%2
0x6984	78.110	Corrupt EA set for file 0x%1. The remaining length, 0x%2, is too small.
0x6985	78.110	Corrupt EA set for file 0x%1. The unpacked total length, 0x%2, is larger than the total data length, 0x%3.
0x6986	78.110	Corrupt EA set for file 0x%1. The EA name is of length 0x%2.
0x6987	78.110	Corrupt EA set for file 0x%1. The unpacked length, 0x%2, is not the same as the record length, 0x%3.
0x6988	78.110	The EA Information value length, 0x%1, in file 0x%2 is incorrect.
0x6989	78.110	The EA total packed length, 0x%2, is too large in file 0x%1.
0x698a	78.110	The second MFT starting LCN in the boot sector is incorrect. The actual value is 0x%2 while the expected value is 0x%1.
0x698b	78.110	The reparse point length, 0x%1, has exceeded a maximum of 0x%2.
0x698c	78.110	The reparse point length, 0x%1, is less than a minimum of 0x%2.
0x698d	78.110	Unable to read reparse point data buffer.
0x698e	78.110	Only 0x%1 bytes returned from a read of 0x%d bytes of the reparse data buffer.
0x698f	78.110	ReparseDataLength, 0x%1, inconsistence with the attribute length 0x%2.
0x6990	78.110	Reparse Tag, 0x%1, is a reserved tag.
0x6992	78.110	File 0x%1 has bad reparse point attribute.
0x6993	78.110	Both reparse point and EA INFORMATION attributes exist in file 0x%1.
0x6994	78.110	The attribute definition table length, 0x%1, is not divisible by 0x%2.
0x6995	78.110	Unable to find child frs 0x%1 with sequence number 0x%2.
0x6996	78.110	Unable to locate attribute of type 0x%1, lowest vcn 0x%2, instance tag 0x%3 in file 0x%4.
0x6997	78.110	The is an attribute list attribute within the attribute list in file 0x%1.
0x6998	78.110	The lowest vcn, 0x%2, is not zero for attribute of type 0x%1 and instance tag 0x%3 in file 0x%4.
0x6999	78.110	The lowest vcn, 0x%2, is not zero for attribute of type 0x%1 in file 0x%3.
0x699a	78.110	The first attribute of type 0x%1 and instance tag 0x%2 in file 0x%3 should not be resident.
0x699b	78.110	The attribute of type 0x%1 and instance tag 0x%2 in file 0x%3 should not be resident.
0x699c	78.110	The attributes with instance tags 0x%2 and 0x%4 have different type codes 0x%1 and 0x%3 respectively in file 0x%5.
0x699d	78.110	The attributes with same type code 0x%1 but different instance tags 0x%2 and 0x%4 have non-contiguous VCN numbers 0x%3 and 0x%5 respectively in file 0x%6.
0x699e	78.110	The attributes with same type code 0x%1 but different instance tags 0x%2 and 0x%4 have different names %3 and %5 respectively in file 0x%6.
0x699f	78.110	The attribute of type 0x%1 and instance tag 0x%2 in file 0x%5 has allocated length of 0x%3 instead of 0x%4.
0x69a0	78.110	The attribute of type 0x%1 in file 0x%4 has allocated length of 0x%2 instead of 0x%3.
0x69a1	78.110	The file attributes flag 0x%1 in file 0x%3 is incorrect. The expected value is 0x%2.
0x69a2	78.110	The sequence number 0x%1 in file 0x%2 is incorrect.
0x69a3	78.110	The total allocated size 0x%3 of attribute of type 0x%1 and instance tag 0x%2 in file 0x%5 is incorrect. The expected value is %4.
0x69a4	78.110	Read failure with status 0x%1 at offset 0x%2 for 0x%3 bytes.
0x69a5	78.110	Incorrect read at offset 0x%1 for 0x%3 bytes but got 0x%2 bytes.
0x69a6	78.110	Write failure with status 0x%1 at offset 0x%2 for 0x%3 bytes.
0x69a7	78.110	Incorrect write at offset 0x%1 for 0x%3 bytes but wrote 0x%2 bytes.
0x69a8	78.110	The data written out is different from what is being read back at offset 0x%1 for 0x%2 bytes.
0x69a9	78.110	The file 0x%1 belongs to parent 0x%3 but got 0x%2 as parent.
0x69aa	78.110	The file 0x%1 has file name %2 when it should be %3.
0x69ab	78.110	The multi-sector header with total size 0x%1, USA offset 0x%2, and USA count 0x%3 is incorrect.
0x69ac	78.110	The USA check value, 0x%2, at block 0x%1 is incorrect. The expected value is 0x%3.
0x69ad	78.110	Unable to query LCN from VCN 0x%2 for attribute of type 0x%1.
0x69ae	78.110	Attribute record of type 0x%1 and instance tag 0x%2 is cross linked starting at 0x%3 for possibly 0x%4 clusters.
0x69af	78.110	Attribute record of type 0x%1 is cross linked starting at cluster 0x%2 for possibly 0x%3 clusters.
0x69b0	78.110	The attribute list in file 0x%1 does not contain standard information attribute.
0x69b1	78.110	The attribute list in file 0x%1 indicates the standard information attribute is outside the base file record segment.
0x69b2	78.110	The index root %2 is missing in file 0x%1.
0x69b3	78.110	The index bitmap %2 is missing in file 0x%1.
0x69b4	78.110	The index bitmap %2 in file 0x%1 is incorrect.
0x69b5	78.110	The index bitmap %2 is present but there is no corresponding index allocation attribute in file 0x%1.
0x69b6	78.110	The length, 0x%2, of the root index %1 in file 0x%4 is too small. The minimum length is 0x%3.
0x69b7	78.110	The root index %1 in file 0x%3 is incorrect. The expected name is %2.
0x69b8	78.110	The collation rule 0x%3 for index root %1 in file 0x%2 is incorrect. The expected value is 0x%4.
0x69b9	78.110	Breaking the parent 0x%1 and child 0x%2 file relationship. This also makes the child an orphan.
0x69ba	78.110	The index attribute of type 0x%2 for index root %1 in file 0x%4 is incorrect. The expected value is 0x%3.
0x69bb	78.110	The index %1 is not a known quota index in file 0x%2.
0x69bc	78.110	The index %1 is not a known security index in file 0x%2.
0x69bd	78.110	The index attribute of type 0x%2 for index root %1 in file 0x%3 is not recognized.
0x69be	78.110	The index attribute of type 0x%2 for index root %1 in file 0x%3 is not indexable.
0x69bf	78.110	The bytes per index buffer, 0x%2, for index root %1 in file 0x%4 is incorrect. The expected value is 0x%3.
0x69c0	78.110	The clusters per index buffer, 0x%2, for index root %1 in file 0x%4 is incorrect. The expected value is 0x%3.
0x69c1	78.110	The index allocation value length, 0x%2, for index %1 in file 0x%4 is not in multiple of 0x%3.
0x69c2	78.110	The index allocation allocated length, 0x%2, for index %1 in file 0x%4 is not in multiple of 0x%3.
0x69c3	78.110	The first free byte, 0x%2, and bytes available, 0x%3, for root index %1 in file 0x%4 are not equal.
0x69c4	78.110	The index entry offset, 0x%3, of index %1 and VCN 0x%2 in file 0x%4 is incorrect.
0x69c5	78.110	The index entry offset, 0x%2, of index %1 in file 0x%3 is incorrect.
0x69c6	78.110	The bytes available, 0x%2, in index header for index %1 in file 0x%4 is not equal to 0x%3.
0x69c7	78.110	The index header for index %1 and VCN 0x%2 in file 0x%3 is not marked as index node.
0x69c8	78.110	The VCN 0x%2 of index %1 in file 0x%3 is incorrect.
0x69c9	78.110	The index bitmap for index %1 in file 0x%2 is invalid or missing.
0x69ca	78.110	The VCN 0x%2 of index %1 in file 0x%3 is already in use.
0x69cb	78.110	The index allocation for index %1 in file 0x%2 is invalid or missing.
0x69cc	78.110	The multi-sector header signature for VCN 0x%2 of index %1 in file 0x%3 is incorrect.
0x69cd	78.110	The USA offset 0x%3 of VCN 0x%2 of index %1 in file 0x%5 is below 0x%4.
0x69ce	78.110	The VCN 0x%2 of index %1 in file 0x%4 is inconsistence with the VCN 0x%3 stored inside the index buffer.
0x69cf	78.110	The bytes per block, 0x%3, read from index buffer of VCN 0x%2 of index %1 in file 0x%4 is incorrect.
0x69d0	78.110	The USA offset 0x%3 of VCN 0x%2 of index %1 in file 0x%4 is incorrect.
0x69d1	78.110	The USA size 0x%3 of VCN 0x%2 of index %1 in file 0x%5 is incorrect. The expected value is 0x%4.
0x69d2	78.110	The index header of index %1 in file 0x%2 is marked as index node when it should not.
0x69d3	78.110	The first free byte, 0x%2, in index header of index %1 in file 0x%4 is not equal to 0x%3.
0x69d4	78.110	Unable to query the name of a file name index entry of length 0x%3 of index %2 in file 0x%4 with parent 0x%1.
0x69d5	78.110	Index entry %3 of index %2 in file 0x%1 points to unused file 0x%4.
0x69d6	78.110	An index entry of index %2 in file 0x%1 points to unused file 0x%3.
0x69d7	78.110	The file 0x%4 pointed to by index entry %3 of index %2 with parent file 0x%1 is not a base file record segment.
0x69d8	78.110	The file 0x%3 pointed to by an index entry of index %2 with parent file 0x%1 is not a base file record segment.
0x69d9	78.110	Unable to locate the file name attribute of index entry %3 of index %2 with parent 0x%1 in file 0x%4.
0x69da	78.110	Unable to locate the file name attribute of an index entry of index %2 with parent 0x%1 in file 0x%3.
0x69db	78.110	The object id index entry in file 0x%1 points to file 0x%2 but the file has no object id in it.
0x69dc	78.110	The object id index entry in file 0x%1 points to file 0x%2 which is not a base file record segment.
0x69dd	78.110	The object id in index entry in file 0x%1 is incorrect. The entry points to file 0x%2.
0x69de	78.110	The parent 0x%2 in an object id index entry in file 0x%1 is incorrect. The correct value is 0x%3.
0x69df	78.110	The object id in file 0x%2 already existed in the object id index in file 0x%1.
0x69e0	78.110	The object id in file 0x%2 does not appear in the object id index in file 0x%1.
0x69e1	78.110	The reparse point index entry in file 0x%1 points to file 0x%2 which is not a base file record segment.
0x69e2	78.110	The reparse tag 0x%2 of reparse point index entry in file 0x%1 is incorrect. The correct reparse tag in file 0x%4 is 0x%3.
0x69e3	78.110	The parent 0x%2 in the reparse point index entry with tag 0x%4 in file 0x%1 is incorrect. The correct value is 0x%3.
0x69e4	78.110	The reparse point index entry in file 0x%1 points to file 0x%2 but the file has no reparse point in it.
0x69e5	78.110	The reparse point in file 0x%2 does not appear in the reparse point index in file 0x%1.
0x69e6	78.110	The file name index present bit is set in file 0x%1 but there is no file name index.
0x69e7	78.110	The root index %2 in file 0x%1 is missing or invalid.
0x69e8	78.110	The index entry length 0x%1 is incorrect. The maximum value is 0x%2.
0x69e9	78.110	The index entry attribute length 0x%2 of index entry type 0x%1 is incorrect. The correct length is 0x%3.
0x69ea	78.110	The index entry data offset 0x%1 and length 0x%2 is inconsistence with the index entry length 0x%3.
0x69eb	78.110	The index entry length is incorrect for index entry type 0x%1.
0x69ec	78.110	The index entry length is too small for index entry type 0x%1.
0x69ed	78.110	The volume information attribute is missing from file 0x%1.
0x69ee	78.110	The attribute record length 0x%1 is too small for attribute of type 0x%3 and instance tag 0x%4. The minimum value is 0x%2.
0x69ef	78.110	The attribute form code 0x%1 is invalid for attribute of type 0x%2 and instance tag 0x%3.
0x69f0	78.110	The attribute of type 0x%1 and instance tag 0x%2 should be resident.
0x69f1	78.110	The standard information attribute length 0x%1 is incorrect. The expected value is 0x%2 or 0x%3.
0x69f2	78.110	Attribute name is not allowed for attribute of type 0x%1 and instance tag 0x%2.
0x69f3	78.110	The attribute of type 0x%1 and instance tag 0x%2 should not be resident.
0x69f4	78.110	The attribute name offset for attribute of type 0x%1 and instance tag 0x%2 is incorrect.
0x69f5	78.110	The attribute name for attribute of type 0x%1 and instance tag 0x%2 contains unicode NULL.
0x69f6	78.110	Unknown attribute of type 0x%1 and instance tag 0x%2.
0x69f7	78.110	The attribute of type 0x%1 and instance tag 0x%2 should not be indexed.
0x69f8	78.110	The attribute of type 0x%1 and instance tag 0x%2 should be indexed.
0x69f9	78.110	The indexable attribute of type 0x%1 and instance tag 0x%2 should not have name.
0x69fa	78.110	The attribute of type 0x%1 and instance tag 0x%2 should have a name.
0x69fb	78.110	The attribute length 0x%1 for attribute of type 0x%3 and instance tag 0x%4 is too small. The minimum value is 0x%2.
0x69fc	78.110	The attribute length 0x%1 for attribute of type 0x%3 and instance tag 0x%4 is too big. The maximum value is 0x%2.
0x69fd	78.110	The resident attribute for attribute of type 0x%4 and instance tag 0x%5 is incorrect. The attribute has value of length 0x%1, and offset 0x%2. The attribute length is 0x%3.
0x69fe	78.110	The resident attribute name is colliding with the resident value for attribute of type 0x%4 and instance tag 0x%5. The attribute name offset is 0x%2, length 0x%1, and the attribute value offset is 0x%3.
0x69ff	78.110	The mapping pairs offset 0x%1 for attribute of type 0x%3 and instance tag 0x%4 exceeded the attribute length 0x%2.
0x6a00	78.110	The mapping pairs offset 0x%1 for attribute of type 0x%3 and instance tag 0x%4 is too small. The minimum value is 0x%2.
0x6a01	78.110	The attribute name is colliding with the mapping pairs for attribute of type %4 and instance tag 0x%5. The attribute name offset is 0x%2, length 0x%1, and the mapping pairs offset is 0x%3.
0x6a02	78.110	The attribute of type 0x%1 and instance tag 0x%2 has bad mapping pairs.
0x6a03	78.110	Unable to initialize an extent list for attribute type 0x%1 with instance tag 0x%2.
0x6a04	78.110	The highest VCN 0x%1 of attribute of type 0x%3 and instance tag 0x%4 is incorrect. The expected value is 0x%2.
0x6a05	78.110	The non resident attribute of type 0x%4 and instance tag 0x%5 is inconsistent. The valid data length is 0x%1, file size 0x%2, and allocated length 0x%3.
0x6a06	78.110	The non resident attribute of type 0x%4 is inconsistent. The valid data length is 0x%1, file size 0x%2, and allocated length 0x%3.
0x6a07	78.110	The allocated length 0x%1 is not in multiple of 0x%2 for attribute of type 0x%3 and instance tag 0x%4.
0x6a08	78.110	The file name value length 0x%1 for attribute of type 0x%3 with instance tag 0x%4 is too small. The minimum value is 0x%2.
0x6a09	78.110	The attribute of type 0x%2 and instance tag 0x%3 is inconsistence. The attribute value length is 0x%1.
0x6a0a	78.110	The file name length is zero for attribute of type 0x%1 and instance tag 0x%2.
0x6a0b	78.110	The file name in file name value in attribute of type 0x%1 and instance tag %2 contains unicode NULL.
0x6a0c	78.110	The multi-sector header signature in file 0x%1 is incorrect.
0x6a0d	78.110	The USA offset 0x%1 in file 0x%3 is too small. The minimum value is 0x%2.
0x6a0e	78.110	The file record segment size 0x%1 is invalid in file 0x%2.
0x6a0f	78.110	The USA offset 0x%1 in file 0x%2 is incorrect.
0x6a10	78.110	The USA size 0x%1 in file 0x%3 is incorrect. The expected value is 0x%2.
0x6a11	78.110	The first attribute offset 0x%1 in file 0x%2 is incorrect.
0x6a12	78.110	The bytes available, 0x%1, in the file record segment header for file 0x%3 is incorrect. The expected value is 0x%2.
0x6a13	78.110	The instance tag 0x%2 of attribute of type 0x%1 in file 0x%3 is already in use.
0x6a14	78.110	The instance tag 0x%2 of attribute of type 0x%1 in file 0x%4 is too large. The instance tag should be less than 0x%3.
0x6a15	78.110	The standard information attribute in file 0x%1 is missing.
0x6a16	78.110	The attribute record offset 0x%1 is too large for attribute of type 0x%3 and instance tag 0x%4 in file 0x%5. The maximum value is 0x%2.
0x6a17	78.110	The record length of attribute of type 0x%1 and instance tag 0x%2 in file 0x%3 should not be zero.
0x6a18	78.110	The record length 0x%1 of attribute of type 0x%2 and instance tag 0x%3 in file 0x%4 is not aligned.
0x6a19	78.110	The record length 0x%1 is too large for attribute of type 0x%3 and instance tag 0x%4 in file 0x%5. The maximum value is 0x%2.
0x6a1a	78.110	The first free byte, 0x%1, in file 0x%4 is incorrect. The number of bytes free in the file record segment is 0x%2 and the total length is 0x%3.
0x6a1b	78.110	The attribute of type 0x%1 and instance tag 0x%2 should be after attribute of type 0x%3 and instance tag 0x%4 in file 0x%5.
0x6a1c	78.110	All attribute of type 0x%1 and instance tag 0x%2 should be indexed in file 0x%5.
0x6a1d	78.110	Two identical attributes of type 0x%1 and instance tag 0x%2 are in file 0x%3.
0x6a1e	78.110	The file name index present bit in file 0x%1 should not be set.
0x6a20	10	The sparse flag in standard information attribute in file 0x%1 is not set.
0x6a22	78.110	The old encrypted flag is being replaced by the new encrypted flag in file 0x%1.
0x6a23	78.110	The encrypted flag in standard information attribute in file 0x%1 is not set.
0x6a24	78.110	The reparse flag in standard information attribute in file 0x%1 is not set.
0x6a25	78.110	The reparse flag in standard information attribute in file 0x%1 should not be set.
0x6a26	78.110	There are more than one NTFS file name attribute in file 0x%1.
0x6a27	78.110	The file name attributes in file 0x%3 has different parents. The DOS name has 0x%1 as parent. The NTFS name has 0x%2 as parent.
0x6a28	78.110	There are more than one DOS file name attribute in file 0x%1.
0x6a29	78.110	The DOS file name attribute in file 0x%1 is incorrect.
0x6a2a	78.110	There is no NTFS file name attribute in file 0x%1.
0x6a2b	78.110	There is no DOS file name attribute in file 0x%1.
0x6a2c	78.110	The DOS and NTFS file name attributes in file 0x%1 are identical.
0x6a2d	78.110	Unable to setup the attribute list in file 0x%1.
0x6a2e	78.110	The attribute type 0x%1 with name %2 in file 0x%3 is missing.
0x6a2f	78.110	The attribute of type 0x%1 in file 0x%2 is missing.
0x6a30	78.110	The unnamed data attribute in file 0x%1 is missing.
0x6a31	78.110	The attribute list in file 0x%1 is missing.
0x6a32	78.110	The length, 0x%3, of the attribute list entry with attribute of type 0x%1 and instance tag 0x%2 in file 0x%4 is not aligned.
0x6a33	78.110	The attribute list entry with attribute of type 0x%1 and instance tag 0x%2 in file 0x%6 is incorrect. The attribute list entry name length is 0x%3, and offset 0x%4. The attribute list length is 0x%5.
0x6a34	78.110	The attribute name offset 0x%3 of attribute list entry with attribute of type 0x%1 and instance tag 0x%2 in file 0x%5 is too small. The minimum value is 0x%4.
0x6a35	78.110	The attribute list length 0x%2 in file 0x%3 is incorrect. The expected value is 0x%1.
0x6a36	78.110	The extent list of the attribute list is crossed linked at 0x%1 for possibly 0x%2 clusters in file 0x%3.
0x6a37	78.110	The attribute list entry with attribute of type 0x%1 and instance tag 0x%2 should be after attribute of type 0x%3 and instance tag 0x%4.
0x6a38	78.110	Two identical attribute list entries of type 0x%1 and instance tag 0x%2 are found.
0x6a39	78.110	The attribute length 0x%3 of attribute of type 0x%1 and name %2 in file 0x%5 is too small. The minimum value is 0x%4.
0x6a3a	78.110	The sparse flag of attribute of type 0x%1 and name %2 in file 0x%3 is not set.
0x6a3b	78.110	The USN Journal offset 0x%1 in file 0x%2 is not at a page boundary.
0x6a3c	78.110	The USN Journal length 0x%1 in file 0x%3 is too large. The maximum value is 0x%2.
0x6a3d	78.110	The USN Journal length 0x%1 in file 0x%3 is less than its offset 0x%2.
0x6a3e	78.110	The remaining USN block at offset 0x%1 in file 0x%2 is less than a page.
0x6a3f	78.110	The remaining of an USN page at offset 0x%1 in file 0x%2 should be filled with zeros.
0x6a40	78.110	The USN Journal entry at offset 0x%1 and length 0x%2 crosses the page boundary.
0x6a41	78.110	The USN Journal entry length 0x%2 at offset 0x%1, in file 0x%4 is larger than the remaining length 0x%3 of a page.
0x6a42	78.110	The USN Journal entry length 0x%2 at offset 0x%1 in file 0x%4 exceeded the page size 0x%3.
0x6a43	78.110	The USN Journal entry length 0x%2 at offset 0x%1 in file 0x%3 is not aligned.
0x6a44	78.110	The USN Journal entry version %2.%3 at offset 0x%1 in file 0x%4 is not recognized.
0x6a45	78.110	The USN Journal entry length 0x%2 at offset 0x%1 in file 0x%4 is too small. The minimum value is 0x%3.
0x6a46	78.110	The remaining USN page length 0x%2 is too small to fit another USN Journal entry at offset 0x%1 in file 0x%4. It needs at least 0x%3 bytes.
0x6a47	78.110	The USN value 0x%1 of USN Journal entry at offset 0x%2 in file 0x%3 is incorrect.
0x6a48	78.110	The USN Journal entry at offset 0x%1 in file 0x%4 is not consistence. The entry has length of 0x%3 and a file name length of 0x%2.
0x6a49	78.110	The USN Journal length 0x%1 in file 0x%4 is less the largest USN encountered, 0x%2, plus eight in file 0x%3.
0x6a4a	78.110	The security data stream is missing from file 0x%1.
0x6a4b	78.110	The security data stream size 0x%1 should not be less than 0x%2.
0x6a4c	78.110	The remaining of a security data stream page starting at offset 0x%1 for 0x%2 bytes contains non-zero.
0x6a4d	78.110	The security data stream entry at offset 0x%1 with length 0x%2 crosses the page boundary.
0x6a4e	78.110	The length, 0x%2, of the security data stream entry at offset 0x%1 is too small. The minimum value is 0x%3.
0x6a4f	78.110	The length, 0x%2, of the security data stream entry at offset 0x%1 exceeded the page size 0x%3.
0x6a50	78.110	The security data stream entry at offset 0x%1 does not fit into the remaining length, 0x%2, of a page. The minimum value is 0x%3.
0x6a51	78.110	The security descriptor entry with Id 0x%2 at offset 0x%1 is invalid.
0x6a52	78.110	The security Id 0x%2 of security descriptor entry at offset 0x%1 is a duplicate.
0x6a53	78.110	The hash value 0x%2 of the security descriptor entry with Id 0x%4 at offset 0x%1 is invalid. The correct value is 0x%3.
0x6a54	78.110	The offset 0x%2 stored in the security descriptor entry with Id 0x%4 at offset 0x%1 is invalid. The correct value is 0x%3.
0x6a55	78.110	The security descriptor in file 0x%1 is invalid.
0x6a56	78.110	The security Id 0x%1 in file 0x%2 is invalid.
0x6a57	78.110	The data stream with name %1 in file 0x%2 is not recognized.
0x6a58	78.110	The attribute definition table length 0x%1 is incorrect. The correct value is 0x%2.
0x6a59	78.110	The attribute definition table content is incorrect.
0x6a5a	78.110	Cluster zero is missing from the data attribute in boot file.
0x6a5b	78.110	Attribute list found in the log file.
0x6a5c	78.110	The data attribute is either resident or missing in the log file.
0x6a5d	78.110	Unable to obtain the LCN in data attribute of the MFT mirror.
0x6a5e	78.110	There is no physical LCN for VCN 0 in data attribute of the MFT mirror.
0x6a5f	78.110	The data attribute of the MFT mirror is not contiguous for 0x%1 sectors.
0x6a60	78.110	The MFT mirror is different from the MFT.
0x6a61	78.110	The data attribute is missing from the upcase file.
0x6a62	78.110	The upcase file length 0x%1 is incorrect. The expected value is 0x%2.
0x6a63	78.110	The upcase file content is incorrect.
0x6a64	78.110	The data attribute is either resident or missing in the MFT mirror.
0x6a65	78.110	The two index entries of length 0x%1 and 0x%2 are either identical or appear in the wrong order.
0x6a66	78.110	The first index entry of length 0x%1 is a leaf but it is not in the root.
0x6a67	78.110	The first index entry of length 0x%1 is a leaf but the previous entry is not.
0x6a68	78.110	Current leaf index entry of length 0x%3 is at depth 0x%2 which is different from other leaf index entry which has a depth of 0x%1.
0x6a69	78.110	The down pointer of current index entry with length 0x%1 is invalid.
0x6a6a	78.110	The index entry length 0x%1 is too large. The maximum value is 0x%2.
0x6a6b	78.110	The allocation attribute does not exist.
0x6a6c	78.110	Clearing unused security descriptor stream entries.
0x6a6d	78.110	Mirror security descriptor block different from that of master security descriptor at offset 0x%1.
0x6a6e	78.110	The attribute definition table cannot be read.
0x6a6f	78.110	The index buffer at VCN 0x%2 of index %1 in file 0x%3 cannot be read.
0x6a70	78.110	The MFT mirror starting at cluster 0x%1 for 0x%2 sectors cannot be read.
0x6a71	78.110	The security descriptor in file 0x%1 cannot be read.
0x6a72	78.110	The upcase table cannot be read.
0x6a73	78.110	The USN attrib of type code 0x%1 and name %2 cannot be read in file 0x%3.
0x6a74	78.110	The EA Data value length, 0x%1, in file 0x%2 is incorrect.
0x6a75	78.110	The index entry length 0x%2 for index %1 in file 0x%4 is too large. The maximum value is 0x%3.
0x6a76	78.110	Unable to query extent list entry 0x%3 from attribute of type 0x%1 and instance tag 0x%2.
0x6a77	78.110	The total allocated size 0x%1 for attribute of type 0x%3 and instance tag 0x%4 is larger than the allocated length 0x%2.
0x6a78	78.110	Unable to locate attribute with instance tag 0x%2 and segment reference 0x%3. The expected attribute type is 0x%1.
0x6a79	78.110	The first index entry offset, 0x%2, for index %1 in file 0x%4 points beyond the length, 0x%3, of the index. VCN is unknown.
0x6a7a	78.110	Some clusters occupied by attribute of type 0x%1 and instance tag 0x%2 in file 0x%3 is already in use.
0x6a7b	78.110	Unable to setup the child file record segment 0x%2 in file 0x%1.
0x6a7c	78.110	The parent 0x%3 of index entry %4 of index %2 in file 0x%5 is incorrect. The expected parent is 0x%1.
0x6a7d	78.110	The file reference 0x%4 of index entry %3 of index %2 with parent 0x%1 is not the same as 0x%5.
0x6a7e	78.110	The file reference 0x%3 of an index entry of index %2 with parent 0x%1 is not the same as 0x%4.
0x6a7f	78.110	Multiple object id index entries in file 0x%1 point to the same file 0x%2.
0x6a80	78.110	The object id index entry in file 0x%1 points to file 0x%2 which is unreadable.
0x6a81	78.110	The object id index entry in file 0x%1 points to file 0x%2 which is not in use.
0x6a82	78.110	The reparse point index entry in file 0x%1 points to file 0x%2 which is not in use.
0x6a83	78.110	The reparse point index entry in file 0x%1 points to file 0x%2 which is unreadable.
0x6a84	78.110	----------------------------------------------------------------------
0x6a85	78.110	Cleaning up instance tags for file 0x%1.
0x6a86	78.110	Cleaning up encrypted flag for file 0x%1.
0x6a87	78.110	Cleaning up sparse flag for file 0x%1.
0x6a88	78.110	Cleaning up %3 unused index entries from index %2 of file 0x%1.
0x6a89	78.110	Cleaning up %1 unused security descriptors.
0x6a8a	78.110	The value length, 0x%1, of the MFT mirror is too small. The minimum value is 0x%2.
0x6a8b	78.110	The valid data length, 0x%1, of the MFT mirror is too small. The minimum value is 0x%2.
0x6a8c	78.110	Index entry %3 of index %2 in file 0x%1 points to unused file 0x%4.
0x6a8d	78.110	An index entry of index %2 in file 0x%1 points to unused file 0x%3.
0x6a8e	78.110	Unable to obtain the LCN in data attribute for VCN 0x%1 of the MFT.
0x6a8f	78.110	An index entry of index %2 in file 0x%1 points to file 0x%3 which is beyond the MFT.
0x6a90	78.110	The segment number 0x%1 in file 0x%2 is incorrect.
0x6a91	78.110	Internal Info:
0x6a92	78.110	The mapping pairs offset 0x%1 for attribute of type 0x%2 and instance tag 0x%3 is not quad aligned.
0x6a93	78.110	The NTFS file name attribute in file 0x%1 is incorrect.
0x6a94	8.110	File 0x%1 only has a standard information attribute.
0x6a95	8.110	A downpointer (VCN 0x%2) was found in index %1 in file 0x%3 but the index has no index allocation attribute.
0x6a96	10	The sparse flag in standard information attribute in file 0x%1 should not be set.
0x6a97	10	The encrypted flag in standard information attribute in file 0x%1 should not be set.
0x6d60	78.110	Errors were found in the Attribute Definition Table.
0x6d61	78.110	Attribute list for file %1 is corrupt.
0x6d62	78.110	Attribute list for file %1 is unreadable.
0x6d63	78.110	Attribute list entry with type code %1 in file %2 is corrupt.
0x6d64	78.110	Attribute list for file %1 is unsorted.
0x6d65	78.110	Errors detected in the Bad Clusters File.
0x6d66	78.110	Errors detected in the Boot File.
0x6d67	78.110	Errors detected in the uppercase file.
0x6d68	78.110	Security descriptor for file %1 is missing or invalid.
0x6d69	78.110	Incorrect information was detected in file record segment %1.
0x6d6b	78.110	Errors detected in encrypted file record segment %1.
0x6d6c	78.110	Errors detected in sparse file record segment %1.
0x6d6e	78.110	Errors detected in reparse point file record segment %1.
0x6d6f	78.110	An invalid filename %1 (%3) was found in directory %2.
0x6d70	78.110	All filenames for File %1 are invalid.
0x6d71	78.110	Minor file name errors were detected in file %1.
0x6d72	78.110	Attribute record (%1, %2) from file record segment %3 is corrupt.
0x6d73	78.110	Attribute records for file record segment %1 are unsorted.
0x6d74	78.110	File record segment %1 is corrupt.
0x6d75	78.110	Instance tags need renumbering for file %1.
0x6d76	78.110	Attribute records from file record segment %1 are badly linked.
0x6d77	78.110	First free byte offset is incorrect in file record segment %1.
0x6d78	78.110	Error detected in index %2 for file %1.
0x6d79	78.110	Index %2 in file %1 is corrupt.
0x6d7a	78.110	Index %2 in file %1 is incorrectly sorted.
0x6d7b	78.110	Default quota record is missing from index %2 in file %1.
0x6d7c	78.110	Collation rule value for index %1 of file %2 is incorrect.
0x6d7d	78.110	Index entry %3 in index %2 of file %1 is incorrect.
0x6d7e	78.110	An index entry from index %2 of file %1 is incorrect.
0x6d7f	78.110	Detected a duplicate object id from file record segment %1.
0x6d80	78.110	An error occurred reading the root directory.
0x6d81	78.110	CHKDSK is examining lost files.
0x6d82	78.110	Detected cycles in directory tree. Extra links between parent file %1 and child file %2 detected.
0x6d83	78.110	Detected orphaned file %1 (%2), should be recovered into directory file %3.
0x6d86	78.110	Detected bad clusters in logfile.
0x6d87	78.110	Detected errors in the Log File.
0x6d88	78.110	Detected errors in the Master File Table (MFT) mirror.
0x6d89	78.110	Examining Usn Journal %1 data stream
0x6d8a	78.110	Examining Usn Journal file record segment.
0x6d8b	78.110	CHKDSK is examining Usn information...
0x6d8c	78.110	Index %1 for file %2 is missing.
0x6d8d	78.110	Examining an index entry with id %3 in index %2 of file %1.
0x6d8e	78.110	The security file record segment is incorrect.
0x6d8f	78.110	Index %2 of file %1 contains %3 unused index entries.
0x6d90	78.110	There are %1 unused security descriptors.
0x6d91	78.110	The mirror copy of the security descriptors data stream contains errors.
0x6d92	78.110	The security descriptors data stream is unreadable.
0x6d93	78.110	Extended attribute information in file %1 is corrupt.
0x6d94	78.110	Extended attribute set and a reparse point detected in file %1.
0x6d95	78.110	File %1 is missing a data attribute.
0x6d96	78.110	File %s is cross-linked.
0x6d97	78.110	File record segment %1 is an orphan.
0x6d98	78.110	Found %1 bad clusters.
0x6d99	78.110	Critical master file table (MFT) files are corrupt.
0x6d9a	78.110	Flags for file record segment %1 are incorrect.
0x6d9b	78.110	The file name in system file record segment %1 contains errors.
0x6d9c	78.110	The object id file is missing.
0x6d9d	78.110	The reparse point file is missing.
0x6d9e	78.110	The quota file is missing.
0x6d9f	78.110	The master file table's (MFT) DATA attribute is incorrect.
0x6da0	78.110	The master file table's (MFT) BITMAP attribute is incorrect.
0x6da1	78.110	The Volume Bitmap is incorrect.
0x6da2	10	The total allocated size in attribute record (%1, %2) of file %3 is incorrect.
0x6f54	78.110	%1 percent complete. (%2 of %3 file records processed)
0x6f55	78.110	%1 percent complete. (%2 of %3 large file records processed)
0x6f56	78.110	%1 percent complete. (%2 of %3 bad file records processed)
0x6f57	78.110	%1 percent complete. (%2 of %3 EA records processed)
0x6f58	78.110	%1 percent complete. (%2 of %3 reparse records processed)
0x6f59	78.110	%1 percent complete. (%2 of %3 index entries processed)
0x6f5a	78.110	%1 percent complete. (%2 of %3 unindexed files scanned)
0x6f5b	78.110	%1 percent complete. (%2 of %3 unindexed files recovered)
0x6f5c	78.110	%1 percent complete. (%2 of %3 SD bytes processed)
0x6f5d	78.110	%1 percent complete. (%2 of %3 file SDs/SIDs processed)
0x6f5e	78.110	%1 percent complete. (%2 of %3 data files processed)
0x6f5f	78.110	%1 percent complete. (%2 of %3 USN bytes processed)
0x6f60	78.110	%1 percent complete. (%2 of %3 files processed)
0x6f61	78.110	%1 percent complete. (%2 of %3 free clusters processed)
0x6fb8	78.110	%1 file records processed.
0x6fb9	78.110	%1 large file records processed.
0x6fba	78.110	%1 bad file records processed.
0x6fbb	78.110	%1 EA records processed.
0x6fbc	78.110	%1 reparse records processed.
0x6fbd	78.110	%1 index entries processed.
0x6fbe	78.110	%1 unindexed files scanned.
0x6fbf	10	%1 unindexed files recovered to lost and found.
0x6fc0	78.110	%1 security descriptor bytes processed.
0x6fc1	78.110	%1 file SDs/SIDs processed.
0x6fc2	78.110	%1 data files processed.
0x6fc3	78.110	%1 USN bytes processed.
0x6fc4	78.110	%1 files processed.
0x6fc5	78.110	%1 free clusters processed.
0x6fc6	78.110	CHKDSK is compacting the security descriptor stream
0x6fc7	78.110	Recreating deleted index %2 in file %1.
0x6fc8	8.110	A scan is already running on this drive. Chkdsk can not run more than one scan on a drive at a time.
0x6fc9	10	Lost and found is located at \%1
0x6fca	10	%1 unindexed files recovered to original directory.
0x7530	78.110	There is no help for this utility.
0x7531	78.110	Critical error encountered.
0x7532	78.110	Incorrect Windows version
0x7594	78.110	Converts a FAT volume to NTFS. CONVERT volume /FS:NTFS [/V] [/CvtArea:filename] [/NoSecurity] [/X] volume Specifies the drive letter (followed by a colon), mount point, or volume name. /FS:NTFS Specifies that the volume will be converted to NTFS. /V Specifies that Convert will be run in verbose mode. /CvtArea:filename Specifies a contiguous file in the root directory that will be the place holder for NTFS system files. /NoSecurity Specifies that the security settings on the converted files and directories allow access by all users. /X Forces the volume to dismount first if necessary. All open handles to the volume will not be valid.
0x7595	78.110	Invalid Parameter - %1
0x7596	78.110	Must specify a file system
0x7597	78.110	Invalid drive specification.
0x7598	78.110	Cannot CONVERT a network drive.
0x7599	78.110	%1 is not a valid file system
0x759a	78.110	Conversion from %1 volume to %2 volume is not available.
0x759b	78.110	The conversion will take place automatically the next time the system restarts.
0x759c	78.110	Cannot determine location of system directory.
0x759d	78.110	Could not find file %1 Make sure that the required file exists and try again.
0x759e	78.110	Could not schedule an automatic conversion of the drive.
0x759f	78.110	The %1 drive is already scheduled for an automatic conversion.
0x75a0	78.110	Converting drive %1 to %2...
0x75a1	78.110	Drive %1 is already %2.
0x75a2	78.110	Could not check volume %1 for errors. The conversion to %2 did not take place.
0x75a3	78.110	The /C option is only valid with the /UNCOMPRESS option.
0x75a8	78.110	Determining disk space required for file system conversion...
0x75a9	78.110	Total disk space: %1 KB
0x75aa	78.110	Free space on volume: %1 KB
0x75ab	78.110	Space required for conversion: %1 KB
0x75ac	78.110	Converting file system
0x75ad	78.110	%1 percent completed.
0x75ae	78.110	Conversion complete
0x75af	78.110	The conversion failed. %1 was not converted to %2
0x75b0	78.110	The conversion has probably failed. %1 may not be converted to %2
0x75c6	78.110	Error during disk read
0x75c7	78.110	Error during disk write
0x75c8	78.110	Insufficient Memory
0x75c9	78.110	Insufficient disk space for conversion
0x75ca	78.110	Cannot relocate existing file system structures
0x75cb	78.110	Cannot create the elementary file system structures.
0x75cc	78.110	Error reading directory %1
0x75cd	78.110	Error converting directory %1. The directory may be damaged or there may be insufficient disk space.
0x75ce	78.110	Error converting file %1. The file may be damaged or there may be insufficient disk space.
0x75cf	78.110	Error converting file data.
0x75d0	78.110	Cannot convert an extended attribute.
0x75d1	78.110	A file contains extended attributes, but the extended attribute file was not found.
0x75d2	78.110	Cannot locate or create an NTFS index.
0x75d3	78.110	This volume cannot be converted to %1. Possible causes are: 1.- Bad sectors in required areas of the volume. 2.- %2 structures in areas required by %1.
0x75d4	78.110	Convert cannot gain exclusive access to the %1 drive, so it cannot convert it now. Would you like to schedule it to be converted the next time the system restarts (Y/N)?
0x75d5	78.110	The %1 file system is not enabled. The volume will not be converted.
0x75d6	78.110	Unsupported sector size. Cannot convert volume to %1.
0x75d7	78.110	The file system has been converted. Please wait while the system restarts.
0x75d8	78.110	The specified drive is the system partition on an ARC-compliant system; its file system cannot be converted
0x75d9	78.110	The disk geometry recorded in the volume's Bios Parameter Block differs from the geometry reported by the driver. This volume cannot be converted to %1.
0x75da	78.110	Name table translation is not available for conversion to %1.
0x75e9	78.110	The volume is too fragmented to be converted to NTFS.
0x75ea	78.110	Cannot find the utility library which contains CHKDSK for the %1 file system. This volume cannot be converted to %2.
0x75eb	78.110	%1 cannot be converted because it contains files or directories with reserved NTFS names in the root directory. There can be no files or directories named $Mft, $MftMirr, $LogFile, $Volume, $AttrDef, $BitMap, $Boot, $BadClus, $Secure, $UpCase, $Extend or $Quota in the root directory.
0x75ec	78.110	This drive is dirty and cannot be converted. You will need to clear the dirty bit on this drive by running CHKDSK /F or allowing AUTOCHK to run on it the next time you reboot.
0x75ed	78.110	The file %1 specified to the /CvtArea option cannot be found at the root.
0x75ee	78.110	The file %1 specified to the /CvtArea option must be in one contiguous block.
0x75ef	78.110	The name %1 specified to the /CvtArea option must be a file name.
0x75f0	78.110	Convert cannot run because the volume is in use by another process. Convert may run if this volume is dismounted first. ALL OPENED HANDLES TO THIS VOLUME WOULD THEN BE INVALID. Would you like to force a dismount on this volume? (Y/N)
0x75f1	78.110	Convert failed to dismount the volume.
0x75f2	78.110	%1
0x75f3	78.110	Unable to set security attributes (%1).
0x75f4	78.110	Unable to schedule the setting of security attributes (%1).
0x75f5	78.110	Cannot convert %1. The volume is write protected.
0x75f6	78.110	Cannot CONVERT volume on this device.
0x75f7	78.110	WARNING! The file specified to /CvtArea is too small and its space will not be used. A file of at least %1 MB is needed.
0x75f8	78.110	This conversion will also remove your previous operating system backup. Do you want to continue? (Y/N)
0x75f9	78.110	Unable to delete uninstall backup image - %1
0x75fa	78.110	Unable to notify other components that this volume has changed.
0x75fb	78.110	Convert has relocated existing file system structures. A restart of your computer is necessary in order for convert to continue.
0x768e	78.110	Parameter format not correct - %1
0x7692	78.110	Active code page: %1
0x7693	78.110	Invalid code page
0x7694	78.110	Displays or sets the active code page number. CHCP [nnn] nnn Specifies a code page number. Type CHCP without a parameter to display the active code page number.
0x7695	78.110	Internal error.
0x7727	78.110	Invalid macro definition.
0x7728	78.110	Edits command lines, recalls Windows commands, and creates macros. DOSKEY [/REINSTALL] [/LISTSIZE=size] [/MACROS[:ALL \| :exename]] [/HISTORY] [/INSERT \| /OVERSTRIKE] [/EXENAME=exename] [/MACROFILE=filename] [macroname=[text]] /REINSTALL Installs a new copy of Doskey. /LISTSIZE=size Sets size of command history buffer. /MACROS Displays all Doskey macros. /MACROS:ALL Displays all Doskey macros for all executables which have Doskey macros. /MACROS:exename Displays all Doskey macros for the given executable. /HISTORY Displays all commands stored in memory. /INSERT Specifies that new text you type is inserted in old text. /OVERSTRIKE Specifies that new text overwrites old text. /EXENAME=exename Specifies the executable. /MACROFILE=filename Specifies a file of macros to install. macroname Specifies a name for a macro you create. text Specifies commands you want to record. UP and DOWN ARROWS recall commands; ESC clears command line; F7 displays command history; ALT+F7 clears command history; F8 searches command history; F9 selects a command by number; ALT+F10 clears macro definitions. The following are some special codes in Doskey macro definitions: $T Command separator. Allows multiple commands in a macro. $1-$9 Batch parameters. Equivalent to %1-%9 in batch programs. $* Symbol replaced by everything following macro name on command line.
0x7729	78.110	To specify the size of the command history buffer under Window NT, use the /listsize switch which sets the number of commands to remember.
0x772a	78.110	Insufficient memory to grow DOSKEY list.
0x772b	78.110	Associates a path with a drive letter.
0x772c	78.110	Drive already SUBSTed
0x772d	78.110	SUBST [drive1: [drive2:]path] SUBST drive1: /D drive1: Specifies a virtual drive to which you want to assign a path. [drive2:]path Specifies a physical drive and path you want to assign to a virtual drive. /D Deletes a substituted (virtual) drive. Type SUBST with no parameters to display a list of current virtual drives.
0x772e	78.110	%1: => %2
0x772f	78.110	Invalid parameter - %1
0x7730	78.110	Incorrect number of parameters - %1
0x7731	78.110	Path not found - %1
0x7732	78.110	Access denied - %1
0x7738	78.110	CHKNTFS: Incorrect command-line format.
0x7739	78.110	Invalid parameter - %1
0x773a	78.110	CHKNTFS: drive specifiers may not contain wildcards.
0x773b	78.110	Displays or modifies the checking of disk at boot time. CHKNTFS volume [...] CHKNTFS /D CHKNTFS /T[:time] CHKNTFS /X volume [...] CHKNTFS /C volume [...] volume Specifies the drive letter (followed by a colon), mount point, or volume name. /D Restores the machine to the default behavior; all drives are checked at boot time and chkdsk is run on those that are dirty. /T:time Changes the AUTOCHK initiation countdown time to the specified amount of time in seconds. If time is not specified, displays the current setting. /X Excludes a drive from the default boot-time check. Excluded drives are not accumulated between command invocations. /C Schedules a drive to be checked at boot time; chkdsk will run if the drive is dirty. If no switches are specified, CHKNTFS will display if the specified drive is dirty or scheduled to be checked on next reboot.
0x773c	78.110	Specify only one of /D, /X, /C, and /T.
0x773d	78.110	You must specify at least one drive name.
0x773e	78.110	%1 is not a valid drive specification.
0x773f	78.110	Cannot query state of drive %1
0x7740	78.110	%1 is dirty. You may use the /C option to schedule chkdsk for this drive.
0x7741	78.110	%1 is not dirty.
0x7742	78.110	Drive %1 does not exist.
0x7743	78.110	CHKNTFS cannot be used for the network drive %1.
0x7744	78.110	CHKNTFS cannot be used for the cdrom drive %1.
0x7745	78.110	CHKNTFS cannot be used for the ram disk %1.
0x7746	78.110	Unable to enable automatic volume upgrade on drive %1.
0x7747	78.110	Skipping drive %1 because it is not an NTFS volume.
0x7748	78.110	CHKNTFS does not work on floppy drive.
0x7749	78.110	Skipping drive %1 because it is not an NTFS, FAT, or FAT32 volume.
0x774a	78.110	The volume %1 does not have a mount point or drive letter.
0x774b	78.110	Chkdsk has been scheduled manually to run on next reboot on volume %1.
0x774c	78.110	The specified AUTOCHK initiation countdown time cannot be less than zero or larger than %1 seconds. The default is %2 seconds.
0x774d	78.110	Unable to set the AUTOCHK initiation countdown time.
0x774e	78.110	The AUTOCHK initiation countdown time is set to %1 second(s).
0x7756	78.110	Remove disks or other media.
0x7757	78.110	Disk error
0x7758	78.110	Press any key to restart
0x7759	8.110	An operating system wasn't found. Try disconnecting any drives that don't contain an operating system.
0x775a	78.110	BOOTMGR is compressed
0x775b	78.110	A disk read error occurred
0x775c	78.110	Press Ctrl+Alt+Del to restart
0x7760	78.110	Volume %1 is UDF version %2.%3.
0x7761	78.110	The volume in %1 contains an unsupported UDF version.
0x7762	78.110	Checking File System %1.
0x7763	78.110	Invalid System Stream detected. System stream information is lost.
0x7764	78.110	The volume was not previously closed properly and may contain errors.
0x7765	78.110	CHKDSK is verifying ICBs ...
0x7766	78.110	ICB verification completed.
0x7767	78.110	CHKDSK is looking for orphan ICBs ...
0x7768	78.110	Search for orphans completed.
0x7769	78.110	CHKDSK is verifying ICB links ...
0x776a	78.110	ICB link verification completed.
0x776b	78.110	Found orphan ICB at block %1.
0x776c	78.110	Correcting invalid Information Length %2 to %3 in ICB at block %1.
0x776d	78.110	Correcting Recorded Blocks field in ICB at block %1.
0x776e	78.110	Correcting invalid Object Size %2 to %3 in ICB at block %1.
0x776f	78.110	Error in allocation descriptors for ICB at block %1. Truncating invalid allocation descriptors.
0x7770	78.110	Cross linked allocation for ICB at block %1. Deleting cross linked ICB allocation.
0x7771	78.110	Multiple non-identical parent FID found in directory ICB at block %1.
0x7772	78.110	Duplicate parent FID found in directory ICB at block %1.
0x7773	78.110	Parent FID found in the middle of directory ICB at block %1.
0x7774	78.110	Deleting parent FID pointing to ICB at block %2 in directory ICB at block %1.
0x7775	78.110	Deleting FID pointing to ICB at block %2 in directory ICB at block %1.
0x7776	78.110	Adding parent FID pointing to ICB at block %2 in directory ICB at block %1.
0x7777	78.110	Adding FID pointing to ICB at block %2 in directory ICB at block %1.
0x7778	78.110	Modifying flags to 0x%3 for FID pointing to ICB at block %2 in directory ICB at block %1.
0x7779	78.110	Deleting Stream ICB entry in stream ICB at block %1. Hierarchical streams not allowed in UDF
0x777a	78.110	CHKDSK is verifying link counts and parent entries ...
0x777b	78.110	Link count and parent entry verification completed.
0x777c	78.110	Deleting stream ICB entry pointing to ICB at block %2 in ICB at block %1.
0x777d	78.110	References found to non-existent ICB at block %1.
0x777e	78.110	Multiple references found to directory ICB at block %1.
0x777f	78.110	Mismatch between parent FID and in-reference found to directory ICB at block %1.
0x7780	78.110	Parent FID not found in directory ICB at block %1.
0x7781	78.110	Invalid parent FID found in directory ICB at block %1.
0x7782	78.110	Adding stream ICB entry pointing to ICB at block %2 in ICB at block %1.
0x7783	78.110	Mismatch between in-references and file type for for ICB at block %1.
0x7784	78.110	Multiple references found to file stream ICB at block %1.
0x7785	78.110	Mismatch between parent FID references and file type for for ICB at block %1.
0x7786	78.110	Incorrect link count for ICB at block %1.
0x7787	78.110	Modifying Root ICB location in File Set Descriptor to block %1.
0x7788	78.110	Creating a new directory ICB at block %1 with parent ICB at block %2.
0x7789	78.110	Creating a new directory ICB at block %1
0x778a	78.110	Found invalid references to root directory ICB at block %1
0x778b	78.110	Found invalid references to system stream directory ICB at block %1
0x778c	78.110	Deleting system stream directory ICB entry in File Set Descriptor.
0x778d	78.110	Creating new File Set Descriptor at block %1.
0x778e	78.110	Correcting errors in File Set Descriptor at block %1.
0x778f	78.110	Creating new Space Bitmap Descriptor at block %1.
0x7790	78.110	Correcting errors in Space Bitmap Descriptor at block %1.
0x7791	78.110	Correcting errors in the Volume Descriptor Sequence.
0x7792	78.110	File Set Descriptor at block %1 is corrupt or unreadable.
0x7793	78.110	Space Bitmap Descriptor at block %1 is corrupt or unreadable.
0x7794	78.110	Main Volume Descriptor Sequence is corrupt or unreadable. Attempting to read the Reserve Volume Descriptor Sequence.
0x7795	78.110	Reserve Volume Descriptor Sequence is corrupt or unreadable.
0x7796	78.110	Correcting the Main Volume Descriptor Sequence using the Reserve Volume Descriptor Sequence.
0x7797	78.110	Correcting the Reserve Volume Descriptor Sequence using the Main Volume Descriptor Sequence.
0x7798	78.110	Cannot fix Volume Descriptor Sequence.
0x7799	78.110	Cannot define a logical volume using main or reserve Volume Descriptor Sequence. Chkdsk aborted.
0x779a	78.110	Correcting cycles in directory tree. Breaking links between parent ICB at block %1 and child ICB at block %2.
0x779b	78.110	CHKDSK is identifying lost files.
0x779c	78.110	Lost file identification completed.
0x779d	78.110	CHKDSK is checking the directory tree for cycles.
0x779e	78.110	CHKDSK is checking system files.
0x779f	78.110	Deleting corrupt Extented Attribute ICB in ICB at block %1.
0x77a0	78.110	Deleting Extended Attribute ICB entry in stream ICB at block %1. Only a file or directory ICB can have extended attributes in UDF.
0x77a1	78.110	%1 KB total disk space.
0x77a2	78.110	%1 KB in %2 files.
0x77a3	78.110	%1 KB in %2 directories.
0x77a4	78.110	%1 KB in %2 alternate data streams.
0x77a5	78.110	%1 KB in %2 stream directories.
0x77a6	78.110	%1 KB in use by the system.
0x77a7	78.110	%1 KB available on disk.
0x77a8	78.110	%1 MB total disk space.
0x77a9	78.110	%1 MB in %2 files.
0x77aa	78.110	%1 MB in %2 directories.
0x77ab	78.110	%1 MB in %2 alternate data streams.
0x77ac	78.110	%1 MB in %2 stream directories.
0x77ad	78.110	%1 MB in use by the system.
0x77ae	78.110	%1 MB available on disk.
0x77af	78.110	File type %1 in ICB tag not supported in UDF. Chkdsk aborted.
0x77b0	78.110	ICB strategy type %1 in ICB tag not supported in UDF. Chkdsk aborted.
0x77b1	78.110	Only unallocated space bitmap is supported for free space management in UDF. Chkdsk aborted.
0x77b2	78.110	Correcting file count to %1 in Logical Volume Integrity Descriptor.
0x77b3	78.110	Correcting directory count to %1 in Logical Volume Integrity Descriptor.
0x77b4	78.110	Cannot fix Logical Volume Integrity Descriptor. Chkdsk aborted.
0x77b5	78.110	Deleting the unique ID system stream since the volume has been modified.
0x77b6	78.110	Found corrupt FID pointing to directory ICB at block %2 in stream directory ICB at block %1.
0x77b7	78.110	Found invalid file identifier in FID pointing to ICB at block %2 in directory ICB at block %1.
0x77b8	78.110	Cannot read Anchor Volume Descriptor Pointer. Chkdsk aborted.
0x77b9	78.110	Deleting corrupt Extented Attribute Space in ICB at block %1.
0x77ba	78.110	Chkdsk cannot be run on this type of media.
0x77bb	78.110	Found mismatch in Anchor Volume Descriptor Pointers.
0x77bc	78.110	One or more Anchor Volume Descriptor Pointers are missing.
0x77bd	78.110	Fixing Anchor Volume Descriptor Pointer at block %1 with prevailing Anchor Volume Descriptor Pointer.
0x77be	78.110	Reseting invalid ICB tag flags in ICB at block %1.
0x77bf	78.110	CHKDSK is verifying object size for ICBs with alternate data streams ...
0x77c0	78.110	ICB object size verification completed.
0x77c1	78.110	Correcting partition size for partition %1 to %2 in Logical Volume Integrity Descriptor.
0x77c2	78.110	Correcting partition free space for partition %1 to %2 in Logical Volume Integrity Descriptor.
0x77c3	78.110	Sparing Table at block %1 is corrupt or unreadable.
0x77c4	78.110	Found mismatching Sparing Tables with identical sequence numbers.
0x77c5	78.110	Modifying System Stream Directory ICB location in File Set Descriptor to block %1.
0x77c6	78.110	Non-allocatable Space Stream is corrupt or unreadable.
0x77c7	78.110	Creating new Non-allocatable Space Stream at block %1.
0x77c8	78.110	Sparing Table missing or unreadable on media that is not Target Defect Managed.
0x77c9	78.110	Invalid partition reference in Extended Attribute ICB entry. Deleting Extended Attribute ICB entry pointing to ICB at block %2 in ICB at block %1.
0x77ca	78.110	Invalid partition reference in Stream Directory ICB entry. Deleting Stream Directory ICB entry pointing to ICB at block %2 in ICB at block %1.
0x77cb	78.110	Invalid partition reference in FID. Deleting FID pointing to ICB at block %2 in directory ICB at block %1.
0x77cc	78.110	Chkdsk is running on media that does not support writes in place. On such media chkdsk operation is limited to verifying the presence of a valid VAT on the last written block and if necessary searching for the last valid VAT and placing it at the end of the disk. This could revert the media to a previous state before the corruption occured.
0x77cd	78.110	Chkdsk could not find a valid VAT at the end of the volume.
0x77ce	78.110	CHKDSK is searching for a valid VAT ...
0x77cf	78.110	Search for VAT completed.
0x77d0	78.110	Chkdsk could not find a valid VAT on the media.
0x77d1	78.110	Chkdsk is copying last valid VAT at block %1 to the end of the volume. This will revert the volume to its state at %2:%3 on %4/%5/%6.
0x77d2	78.110	There is no writable space available in the physical partition to write a new valid VAT.
0x77d3	78.110	Invalid flags in FID. Deleting FID pointing to ICB at block %2 in directory ICB at block %1.
0x77d4	78.110	Reserve Sparing Table not present on the disk.
0x77d5	78.110	Creating Reserve Sparing Table at sector %1.
0x77d6	78.110	Insufficient free space to create Reserve Sparing Table.
0x77d7	78.110	Creating Main Volume Descriptor Sequence at sector %1.
0x77d8	78.110	Insufficient free space to create Main Volume Descriptor Sequence.
0x77d9	78.110	Creating Reserve Volume Descriptor Sequence at sector %1.
0x77da	78.110	Insufficient free space to create Reserve Volume Descriptor Sequence.
0x77db	78.110	Correcting errors in Unallocated Space Descriptor in the Volume Descriptor Sequence.
0x77dc	78.110	Correcting errors in Anchor Volume Descriptor Pointer.
0x77dd	78.110	Cannot fix errors in Anchor Volume Descriptor Pointer.
0x77de	78.110	A background low-level format of the media is in progress. Windows will avoid writes to the end of the media to allow early eject. This is not a corruption. Chkdsk will fix the media for UDF compliance in future when the background format is complete.
0x77df	78.110	Low level format of CD/DVD media failed..
0x77e0	78.110	Unsupported UDF version in Volume Descriptor Sequence.
0x77e1	78.110	Main metadata file at block %1 is corrupt.
0x77e2	78.110	Mirror metadata file at block %1 is corrupt.
0x77e3	78.110	Metadata bitmap file at block %1 is corrupt.
0x77e4	78.110	Creating new Metadata Bitmap.
0x77e5	78.110	Correcting errors in Metadata Bitmap.
0x77e6	78.110	Creating new Metadata Bitmap File at block %1.
0x77e7	78.110	Creating new Metadata Mirror File at block %1.
0x77e8	78.110	Insufficient free space to create duplicate metadata. Switching to non-duplicated metadata for logical volume.
0x77e9	78.110	Correcting inconsistencies between main and mirror metadata.
0x77ea	78.110	Correcting number of partitions to %1 in Logical Volume Integrity Descriptor.
0x77eb	78.110	FID references block beyond the end of the partition. Deleting FID pointing to ICB at block %2 in directory ICB at block %1.
0x77ec	78.110	The disk contains structures that are not supported in UDF %1.%2. Chkdsk aborted.
0x77ed	78.110	Creating new Non-allocatable Space File at block %1.
0x77ee	78.110	Non-allocatable Space File is corrupt or unreadable.
0x77ef	78.110	Logical Volume Integrity Descriptor at block %1 is corrupt.
0x77f0	78.110	Creating new Logical Volume Integrity Descriptor at block %1.
0x77f1	78.110	Background format is incomplete, skipping reserve AVDP and VDS checks.
0x7918	78.110	An error occurred while examining the boot region.
0x7919	78.110	Corruption was found while examining the boot region.
0x791a	78.110	An error occurred while examining files and directories.
0x791b	78.110	Corruption was found while examining files and directories.
0x791c	78.110	An error occurred while examining the volume bitmap.
0x791d	78.110	Corruption was found while examining the volume bitmap.
0x791e	78.110	An error occurred while recovering lost files.
0x791f	78.110	Corruption was found while examining files in directory %1 (%2).
0x7920	78.110	Both copies of the boot information for this volume are corrupt. Chkdsk cannot continue.
0x7921	78.110	An error occurred while examining the free space on the volume.
0x7922	78.110	Bad sectors were found and tested while examining free space on the volume.
0x7923	78.110	The volume has been successfully checked, but Windows was unable to mark the volume as clean.
0x7924	78.110	The file allocation table (FAT) is corrupted.
0x7925	78.110	Volume label (15 characters, ENTER for none)?
0x7926	78.110	The volume label is too long.
0x7927	78.110	Corruption due to bad sectors was found while examining files in directory %1. Entries %2 to %3 were affected.
0x7928	78.110	The bad sectors will only be repaired if the "/r" option is specified.
0x7929	78.110	A media error has been detected. Bad sectors may be present on the volume.
0x792a	78.110	The volume will be checked for bad sectors.
0x792b	8.110	The cluster size must be a minimum of 16KB.
0x792c	8.110	Floppy disks cannot be formatted with the ReFS file system.
0x792d	8.110	Failed to initialize underlying data structures status %1.
0x792e	10	You can only use /FREEORPHANEDCHAINS or /MARKCLEAN on FAT/FAT32/exFAT.
0x792f	10	/F and /MARKCLEAN are mutually exclusive.
0x7930	10	Windows is verifying file allocations...
0x7b0c	8.110	Examining %1 corruption records ...
0x7b0d	8.110	Examining %1 corruption record ...
0x7b0e	8.110	%1 corruption records processed in %2 seconds.
0x7b0f	8.110	%1 corruption record processed in %2 seconds.
0x7b16	8.110	Record %1 of %2:
0x7b17	8.110	corruption found and fixed.
0x7b18	8.110	corruption found.
0x7b19	8.110	no corruption found.
0x7b1a	8.110	unexpected corruption found.
0x7b20	8.110	Corrupt File "%1" ...
0x7b21	8.110	Unused file metadata marked as used ...
0x7b22	8.110	%1 Bad clusters in file "%2" starting at file offset %3 ...
0x7b23	8.110	%1 Bad free clusters starting at logical cluster %2 ...
0x7b24	8.110	File "%1" and file "%2" both own logical clusters [%3, %4) ...
0x7b25	8.110	File "%1" and file "%2" both own logical cluster %3 ...
0x7b26	8.110	Corrupt security descriptor entry at offset %2 in %1:$SDS ...
0x7b27	8.110	%1 files have an invalid security ID ...
0x7b28	8.110	File %1 has an invalid security ID ...
0x7b29	8.110	Bad index "%1" in directory "%2" ...
0x7b2a	8.110	Bad subtree in index "%1" of directory "%2" ...
0x7b2b	8.110	Corruption in index "%1" of directory "%2" ...
0x7b2c	8.110	Unneeded index entry in index "%1" of directory "%2" ...
0x7b2d	8.110	Index "%1" of directory "%2" is mis-ordered ...
0x7b2e	8.110	Missing %1 entries in index "%3" of directory "%2" ...
0x7b2f	8.110	Index entry for file "%1" is missing from index "%3" of directory "%2" ...
0x7b30	8.110	Cycle beginning at directory "%1" and ending in directory "%2" ...
0x7b31	8.110	%1 clusters allocated to file "%2" at offset "%3" are marked as free ...
0x7b32	8.110	Adding %1 lost files to index "%3" of directory "%2" ...
0x7b33	8.110	Adding lost file "%1" to index "%3" of directory "%2" ...
0x7b34	8.110	Security ID %1 is non-existent and unused ...
0x7b35	8.110	Index "%1" of directory "%2" is partially mis-ordered ...
0x7b36	8.110	Index "%1" of directory "%2" has a cycle ...
0x7b70	8.110	Windows has found problems and they were all fixed online. No further action is required.
0x7b71	10	Windows has found problems and some were fixed online; the remaining problems must be fixed offline.
0x7b72	10	Windows has found problems that must be fixed offline.
0x7b73	8.110	Windows has found problems and encountered online repair failure -- "chkdsk /f" required.
0x7b74	8.110	Snapshot creation failed. CHKDSK cannot perform an online scan of the volume.
0x7b75	8.110	Snapshot was deleted. CHKDSK cannot continue.
0x7b76	10	Please run "chkdsk /f" to fix the issues.
0x7b77	10	Please run "chkdsk /spotfix" to fix the issues.
0x7bd4	8.110	"chkdsk /scan" is aborting due to self-healing command failure: %1 "chkdsk /f" will be required to repair the volume.
0x7bd5	8.110	Deleted duplicate filename %1 (%3) in directory %2.
0x7bd6	8.110	Found duplicate filename %1 (%3) in directory %2.
0x7bd7	8.110	Scanning and repairing drive: %1% complete
0x7bd8	8.110	Stage 1: Examining basic file system structure ...
0x7bd9	8.110	Stage 2: Examining file name linkage ...
0x7bda	8.110	Stage 3: Examining security descriptors ...
0x7bdb	8.110	Stage 4: Looking for bad clusters in user file data ...
0x7bdc	8.110	Stage 5: Looking for bad, free clusters ...
0x7bdd	8.110	Found corrupt basic file structure for "%1"
0x7bde	8.110	Found unused file metadata marked as used
0x7bdf	8.110	Found %1 bad clusters in file "%2" starting at file offset %3
0x7be0	8.110	Found %1 bad free clusters starting at logical cluster %2
0x7be1	8.110	File "%1" and file "%2" both own logical clusters [%3, %4)
0x7be2	8.110	File "%1" and file "%2" both own logical cluster %3
0x7be3	8.110	Found corrupt security descriptor entry at offset %2 in %1:$SDS
0x7be4	8.110	Found %1 files (%2) which refer to a non-existent security descriptor %3
0x7be5	8.110	File %1 refers to a non-existent security descriptor %2
0x7be6	8.110	Found a bad index "%1" in directory "%2"
0x7be7	8.110	Found a bad subtree in index "%1" of directory "%2"
0x7be8	8.110	Found corruption in index "%1" of directory "%2"
0x7be9	8.110	Found an unneeded link (%1) in index "%2" of directory "%3"
0x7bea	8.110	Found a mis-ordered index "%1" from directory "%2"
0x7beb	8.110	Found %1 missing entries (%2) in index "%3" of directory "%4"
0x7bec	8.110	Found missing Index entry for file "%1" from index "%3" of directory "%2"
0x7bed	8.110	Found %1 lost files (%2); requesting reconnection to index "%3" of directory "%4"
0x7bee	8.110	Found lost file "%1"; requesting reconnection to index "%2" of directory "%3"
0x7bef	8.110	Found a naming cycle beginning at directory "%1" and ending in directory "%2"
0x7bf0	8.110	Found %1 clusters allocated to file "%2" at offset "%3" marked as free
0x7bf1	8.110	Found a cycle in index "%1" from directory "%2"
0x7bf2	8.110	Found a partially mis-ordered index "%1" from directory "%2"
0x7bf7	8.110	Progress: %4 of %5 done; Stage: %1%; Total: %2%; ETA: %6:%7:%8 %9
0x7bf8	8.110
0x7bf9	8.110	Found %1 files (%2) with bad links
0x7bfa	8.110	Found a file "%1" with bad links
0x7bfb	8.110	Security ID %1 is non-existent and unused
0x7bfc	8.110	... repaired online.
0x7bfd	8.110	... queued for offline repair.
0x7bfe	8.110	self-healing requires we abort and restart the scan.
0x7bff	8.110	unexpected outcome from self-healing -- "chkdsk /f" required.
0x7c00	8.110	was not able to send command for self-healing due to lack of memory.
0x7c01	8.110	"Chkdsk /scan" is restarting due to stale information about crosslinks.
0x7c02	8.110	Scanning and repairing drive (%1): %2% complete
0x7c03	8.110	Scanning and repairing drive...
0x7c04	8.110	Scanning and repairing drive (%1)...
0x7c2e	8.110	"Chkdsk /scan" has found volume bitmap corruption which can only be repaired by "chkdsk /f". Aborting.
0x7c2f	8.110	"Chkdsk /scan" has found and repaired critical volume bitmap corruption online and must restart the scan.
0x7c30	8.110	"chkdsk /scan" is aborting due to corruption found in the $Boot file. "chkdsk /f" will be required to repair the volume.
0x7c38	8.110	"Force Full Chkdsk" volume state is set -- spotfix is not possible.
0x7c39	8.110	Windows has examined the list of previously identified issues and found no problems. No further action is required.
0x7c3a	8.110	There is no list of previously identified issues associated with this drive. No further action is required.
0x7c3b	8.110	Windows has examined the list of previously identified potential issues and found no problems. No further action is required.
0x7c3c	8.110	There is no list of previously identified potential issues associated with this drive. No further action is required.
0x7c3d	8.110	Windows has examined the list of previously identified potential issues and found problems. Please run chkdsk /scan to fully analyze the problems and queue them for repair.
0x7c3e	8.110	Windows could not verify the list of previously identified potential issues. Please run chkdsk /scan to find the problems and queue them for repair.
0x7c3f	8.110	Windows cannot perform an online scan on the volume because it is in the "Full Chkdsk Needed" state. Please run "chkdsk /f" to repair the volume.
0x7c9c	8.110	The ReFS file system does not need to be checked.
0x7c9d	10	Fixing (%1) Stage %2: %3% (%4 of %5); Total: %6%; ETA: %7:%8:%9 %10
0x4e0c2710	8.110	%1!*s!Corruption Record:
0x4e0c2711	8.110	%1!*s!Corruption Record: %2!#018llx!
0x4e0c4e20	8.110	%1!*s!Header:
0x4e0c4e21	8.110	%1!*s!Description:
0x4e0c4e22	8.110	%1!*s!Verb-Specific Fields:
0x4e0c7530	8.110	NoOp
0x4e0c7531	8.110	ForceFullChkdsk
0x4e0c7532	8.110	ForceProactiveScan
0x4e0c7533	8.110	BadFRS
0x4e0c7534	8.110	OrphanChildFRS
0x4e0c7535	8.110	BadClusters
0x4e0c7536	8.110	BadFreeClusters
0x4e0c7537	8.110	CrossLink
0x4e0c7538	8.110	CorruptSDEntry
0x4e0c7539	8.110	InvalidSecurityId
0x4e0c753a	8.110	IndexAttribute
0x4e0c753b	8.110	IndexSubtree
0x4e0c753c	8.110	IndexOffset
0x4e0c753d	8.110	IndexEntry
0x4e0c753e	8.110	IndexOrder
0x4e0c753f	8.110	Connect
0x4e0c7540	8.110	BreakCycle
0x4e0c7541	8.110	FRSAllocate
0x4e0c7542	8.110	IndexSort
0x4e0c7543	8.110	IndexCycle
0x4e0c9c3f	8.110	Unknown
0x4e0c9c40	8.110	TESTING
0x4e0c9c41	8.110	DETECTED_IN_DRIVER
0x4e0c9c42	8.110	GLOBALLY_VERIFIED
0x4e0c9c43	8.110	SKIP_SELF_HEALING
0x4e0c9c44	8.110	SELF_HEALING_ATTEMPTED
0x4e0c9c45	8.110	TESTED_DUPLICATE
0x4e0c9c46	8.110	DUPLICATE
0x4e0c9c47	8.110	PREVENTS_MOUNT
0x4e0c9c48	8.110	MAINTENANCE
0x4e0c9c49	8.110	CRITICAL
0x4e0c9c4a	8.110	SPECULATIVE
0x4e0cd311	8.110	%1!*s!LCN : %2!#018llx!
0x4e0cd312	8.110	%1!*s!Run Length : %2!#010x!
0x4e0ce6b8	8.110	%1!*s!Block %2!d! : %3!#018llx!
0x4e0ce6b9	8.110	%1!*s!Corruption Context %2!2d!:
0x4e0ce6ba	8.110	CallStack
0x4e0ce6bb	8.110	TestInformation
0x4e0ce6bc	8.110	BinarySample
0x4e0ce6bd	8.110	SelfHealingResult
0x4e0cf649	8.110	%1!*s!Attribute:
0x4e0cf64a	8.110	%1!s!TypeCode: %2!#x! Name: %3!.s!
0x4e0cfa18	8.110	%1!*s!Version : %2!1d!.%3!1d!
0x4e0cfa19	8.110	%1!*s!Flags : %2!s!
0x4e0cfa1a	8.110	%1!*s!Length : %2!d! bytes
0x4e0cfa1b	8.110	%1!*s!InstanceTag : %2!38s!
0x4e0cfa1c	8.110	%1!*s!Verb : %2!s!
0x4e0cfa1d	8.110	%1!*s!FRN : %2!#06x! %3!04x!`%4!08x!
0x4e0cfa1e	8.110	%1!*s!ChildFRS Count : %2!d!
0x4e0cfa1f	8.110	%1!*s!ChildFRS %2!d! : %3!#06x! %4!04x!`%5!08x!
0x4e0cfa20	8.110	%1!*s!Extent:
0x4e0cfa22	8.110	%1!*s!Owning Extent :
0x4e0cfa23	8.110	%1!*s!Crossing Extent :
0x4e0cfa24	8.110	%1!*s!Offset : %2!#018llx!
0x4e0cfa25	8.110	%1!*s!Security Id : %2!#010x!
0x4e0cfa26	8.110	%1!*s!FRN Count : %2!d!
0x4e0cfa27	8.110	%1!*s!FRN %2!d! : %3!#06x! %4!04x!`%5!08x!
0x4e0cfa28	8.110	%1!*s!Index :
0x4e0cfa29	8.110	%1!*s!Value Length : %2!d! bytes
0x4e0cfa2a	8.110	Key :
0x4e0cfa2b	8.110	%1!*s!Value :
0x4e0cfa2c	8.110	%1!*s!Block Offset : %2!#010x!
0x4e0cfa2d	8.110	%1!*s!Recover FRN : %2!#06x! %3!04x!`%4!08x!
0x4e0cfa2e	8.110	%1!*s!Parent FRN : %2!#06x! %3!04x!`%4!08x!
0x4e0cfa2f	8.110	%1!*s!Child FRN : %2!#06x! %3!04x!`%4!08x!
0x4e0cfa30	8.110	%1!*s!VCN: %2!#018llx! LCN: %3!#018llx! Length: %4!#010x!
0x4e0cfa32	8.110	%1!*s!FileName: %2
0x4e0cfa33	8.110	NtfsFileName: ParentDirectory: %1!#04x! %2!04x!`%3!08x! Info: CreationTime: %4!#016llx! LastModificationTime: %5!#016llx! LastChangeTime: %6!#016llx! LastAccessTime: %7!#016llx! AllocatedLength: %8!#016llx! FileSize: %9!#016llx! FileAttributes: %10!#08x! PackedEaSize: %11!#04x! Reserved: %12!#04x! ReparsePointTag: %13!#04x!
0x4e0cfa34	8.110	Flags:
0x4e0cfa35	8.110	FILE_NAME_NTFS
0x4e0cfa36	8.110	FILE_NAME_DOS
0x4e0cfa37	8.110	OwnerID: %1!#08x!
0x4e0cfa38	8.110	ReparseIndexKey: FileReparseKey: %1!#08x! FileId: %2!#04x! %3!04x!`%4!08x!
0x4e0cfa39	8.110	SecurityHashKey: Hash: %1!#08x! SecurityId: %2!#08x!
0x4e0cfa3a	8.110	SecurityId: %1!#08x!
0x4e0cfa3b	8.110	NtfsObjectIdInfo: FileSystemReference: %2!#04x! %3!04x!`%4!08x!
0x4e0cfa3c	8.110	ExtendedInfo:
0x4e0cfa3d	8.110	DEFAULT_LIMITS
0x4e0cfa3e	8.110	LIMIT_REACHED
0x4e0cfa3f	8.110	ID_DELETED
0x4e0cfa40	8.110	QuotaUserData: QuotaVersion: %1!#08x! QuotaFlags: %2!s! QuotaUsed: %3!#016llx! QuotaChangeTime: %4!#016llx! QuotaThreshold: %5!#016llx! QuotaLimit: %6!#016llx! QuotaExceededTime: %7!#016llx! QuotaSid: %8!s!
0x4e0cfa41	8.110	SecurityDescriptorHeader: SecurityHashKey: Hash: %1!#08x! SecurityId: %2!#08x! Offset: %3!#016llx! Length: %4!#08x!
0x4e0cfa42	8.110	%1!*s!Block : %2!#018llx!
0x4e0cfa43	8.110	%1!*s!Entry Ordinal : %2!d!
0x4e0cfa44	8.110	%1!*s!Block Count : %2!d!
0x4e0cfa45	8.110	%1!*s!Context Type : %2
0x4e0cfa46	8.110	%1!*s!Data:
0x4e0cfa47	8.110	STALE_UNNAMED_INDEX_ENTRY_POINTS_TO_FRS
0x4e0cfa48	8.110	INCORRECT_FRS_MULTI_SECTOR_HEADER_SIGNATURE
0x4e0cfa49	8.110	FRS_USA_OFFSET_BELOW_MINIMUM
0x4e0cfa4a	8.110	INCORRECT_FRS_USA_OFFSET
0x4e0cfa4b	8.110	INCORRECT_FRS_USA_SIZE
0x4e0cfa4c	8.110	INCORRECT_FIRST_ATTR_OFFSET
0x4e0cfa4d	8.110	INCORRECT_FRS_HEADER
0x4e0cfa4e	8.110	BAD_FRS
0x4e0cfa4f	8.110	INCORRECT_SEQUENCE_NUMBER
0x4e0cfa50	8.110	INCORRECT_SEGMENT_NUMBER
0x4e0cfa51	8.110	ATTR_RECORD_OFFSET_TOO_LARGE
0x4e0cfa52	8.110	ATTR_RECORD_LENGTH_CANNOT_BE_ZERO
0x4e0cfa53	8.110	ATTR_RECORD_LENGTH_MISALIGNED
0x4e0cfa54	8.110	ATTR_RECORD_TOO_LARGE
0x4e0cfa55	8.110	INCORRECT_FIRST_FREE_BYTE
0x4e0cfa56	8.110	ATTR_LOWEST_VCN_IS_NOT_ZERO
0x4e0cfa57	8.110	INVALID_FILE_ATTR
0x4e0cfa58	8.110	MISSING_STANDARD_INFO
0x4e0cfa59	8.110	MISSING_FILE_NAME_INDEX_PRESENT_BIT
0x4e0cfa5a	8.110	FILE_NAME_INDEX_PRESENT_BIT_SET
0x4e0cfa5b	8.110	CANNOT_FIND_UNNAMED_DATA_ATTR
0x4e0cfa5c	8.110	MISSING_SPARSE_FLAG_IN_STD_INFO
0x4e0cfa5d	8.110	NTFS_SPARSE_FLAG_SET_IN_STD_INFO
0x4e0cfa5e	8.110	MISSING_ENCRYPTED_FLAG_IN_STD_INFO
0x4e0cfa5f	8.110	MISSING_REPARSE_POINT_FLAG_IN_STD_INFO
0x4e0cfa60	8.110	REPARSE_POINT_FLAG_SET_IN_STD_INFO
0x4e0cfa61	8.110	BAD_MAPPING_PAIRS
0x4e0cfa62	8.110	INVALID_ATTR_FORM_CODE
0x4e0cfa63	8.110	ATTR_RECORD_LENGTH_TOO_SMALL
0x4e0cfa64	8.110	ATTR_SHOULD_BE_RESIDENT
0x4e0cfa65	8.110	INCORRECT_STD_INFO_ATTR_SIZE
0x4e0cfa66	8.110	ATTR_SHOULD_NOT_HAVE_NAME
0x4e0cfa67	8.110	INSTANCE_TAG_TOO_LARGE
0x4e0cfa68	8.110	DUPLICATED_INSTANCE_TAG
0x4e0cfa69	8.110	ATTR_SHOULD_NOT_BE_RESIDENT
0x4e0cfa6a	8.110	INCORRECT_ATTR_NAME_OFFSET
0x4e0cfa6b	8.110	NULL_FOUND_IN_ATTR_NAME
0x4e0cfa6c	8.110	UNKNOWN_ATTR_TO_ATTR_DEF_TABLE
0x4e0cfa6d	8.110	ATTR_SHOULD_NOT_BE_INDEXED
0x4e0cfa6e	8.110	ATTR_SHOULD_BE_INDEXED
0x4e0cfa6f	8.110	INDEXABLE_ATTR_SHOULD_NOT_HAVE_NAME
0x4e0cfa70	8.110	ATTR_SHOULD_BE_NAMED
0x4e0cfa71	8.110	ATTR_LENGTH_TOO_SMALL
0x4e0cfa72	8.110	ATTR_LENGTH_TOO_BIG
0x4e0cfa73	8.110	INCORRECT_RESIDENT_ATTR
0x4e0cfa74	8.110	RESIDENT_ATTR_COLLISION
0x4e0cfa75	8.110	NON_RESIDENT_ATTR_HAS_BAD_MAPPING_PAIRS_OFFSET
0x4e0cfa76	8.110	NON_RESIDENT_ATTR_HAS_UNALIGNED_MAPPING_PAIRS_OFFSET
0x4e0cfa77	8.110	NON_RESIDENT_ATTR_MAPPING_PAIRS_OFFSET_TOO_SMALL
0x4e0cfa78	8.110	NON_RESIDENT_ATTR_COLLISION
0x4e0cfa79	8.110	INVALID_NON_RESIDENT_ATTR_SIZES
0x4e0cfa7a	8.110	INVALID_NON_RESIDENT_ATTR_TOTAL_ALLOC
0x4e0cfa7b	8.110	INVALID_NON_RESIDENT_ATTR_TOTAL_ALLOC_BLOCK
0x4e0cfa7c	8.110	BAD_FILE_NAME_LENGTH_IN_FILE_NAME_VALUE
0x4e0cfa7d	8.110	INCONSISTENT_FILE_NAME_VALUE
0x4e0cfa7e	8.110	NULL_FOUND_IN_FILE_NAME_OF_FILE_NAME_VALUE
0x4e0cfa7f	8.110	CROSS_LINK_DETECTED
0x4e0cfa80	8.110	MISSING_PARENT_IN_FILE_NAME
0x4e0cfa81	8.110	MISSING_INDEX_ENTRY
0x4e0cfa82	8.110	INDEX_ENTRY_FILE_NAME_HAS_INCORRECT_PARENT
0x4e0cfa83	8.110	INCORRECT_INDEX_ENTRY_FILE_REF
0x4e0cfa84	8.110	MFT_BITMAP_NOT_SET
0x4e0cfa85	8.110	INVALID_SECURITY_ID
0x4e0cfa86	8.110	INCORRECT_INDEX_ENTRY_FILE_NAME_FLAGS
0x4e0cfa87	8.110	DOS_NTFS_NAMES_HAVE_DIFFERENT_PARENTS
0x4e0cfa88	8.110	NTFS_FILE_NAME_ALREADY_ENCOUNTERED
0x4e0cfa89	8.110	DOS_FILE_NAME_ALREADY_ENCOUNTERED
0x4e0cfa8a	8.110	MISSING_DOS_NAME
0x4e0cfa8b	8.110	MISSING_NTFS_NAME
0x4e0cfa8c	8.110	DOS_NTFS_NAMES_ARE_IDENTICAL
0x4e0cfa8d	8.110	CLEARING_IN_USE
0x4e0cfa8e	8.110	REPAIRING_SEQUENCE_NUMBER
0x4e0cfa8f	8.110	REPAIRING_FIRST_FREE_BYTE
0x4e0cfa90	8.110	REPAIRING_SEGMENT_NUMBER
0x4e0cfa91	8.110	REPAIRING_FILE_ATTRIBUTES
0x4e0cfa92	8.110	DELETING_ATTRIBUTE
0x4e0cfa93	8.110	REPAIRING_FILE_RECORD_FLAGS
0x4e0cfa94	8.110	ADD_ATTRIBUTE
0x4e0cfa95	8.110	DELETING_INDEX_ENTRY
0x4e0cfa96	8.110	DELETING_GENERIC_INDEX_ENTRY
0x4e0cfa97	8.110	MFT_OFFSET_TOO_LARGE
0x4e0cfa98	8.110	FILE_RECORD_NOT_IN_USE
0x4e0cfa99	8.110	FILE_RECORD_REUSED
0x4e0cfa9a	8.110	MISSING_BASE_FILE_RECORD
0x4e0cfa9b	8.110	FILE_DELETED
0x4e0cfa9c	8.110	BITMAP_CORRUPT
0x4e0cfa9d	8.110	PAGING_FILE_CORRUPT
0x4e0cfa9e	8.110	MFT_CORRUPT
0x4e0cfa9f	8.110	SYSTEM_FILE_CORRUPT
0x4e0cfaa0	8.110	ATTRIBUTE_LIST_FOUND
0x4e0cfaa1	8.110	OBJECT_ID
0x4e0cfaa2	8.110	REPARSE_ID
0x4e0cfaa3	8.110	SET_MFT_BITMAP
0x4e0cfaa4	8.110	REPAIRING_SECURITY_ID
0x4e0cfaa5	8.110	ADDING_INDEX_ENTRY
0x4e0cfaa6	8.110	SET_FILE_NAME_FLAGS
0x4e0cfaa7	8.110	STALE_INFORMATION
0x4e0cfaa8	8.110	ATTRIBUTE_NOT_FOUND
0x4e0cfaa9	8.110	SET_VOLUME_BITMAP
0x4e0cfaaa	8.110	CLEAR_VOLUME_BITMAP
0x4e0cfaab	8.110	CLUSTERS_ALREADY_IN_USE
0x4e0cfaac	8.110	INVALID_VCN
0x4e0cfaad	8.110	INVALID_LCN
0x4e0cfaae	8.110	INVALID_RUN_LENGTH
0x4e0cfaaf	8.110	LCN_NOT_EXIST
0x4e0cfab0	8.110	FILE_NAME_ATTRIBUTE_ONLY
0x4e0cfab1	8.110	INVALID_ARRAY_LENGTH_COUNT
0x4e0cfab2	8.110	STD_INFO_NON_RESIDENT
0x4e0cfab3	8.110	SDS_NOT_FOUND
0x4e0cfab4	8.110	STD_INFO_TOO_SMALL
0x4e0cfab5	8.110	SID_VALID
0x4e0cfab6	8.110	DENY_DEFRAG
0x4e0cfab7	8.110	%1!*s!SelfHealingContext:
0x4e0cfab8	8.110	%1!*s!CorruptionHint%2!1d!: %3
0x4e0cfab9	8.110	%1!*s!CorruptionResolution1: %2!s!
0x4e0cfaba	8.110	%1!*s!CorruptionResolution2: (%2!#018llx!)
0x4e0cfb80	8.110	%1!*s!NtfsCallStack:
0x4e0cfb81	8.110	%1!*s!File: %2!d!
0x4e0cfb82	8.110	%1!*s!Line Number: %2!d!
0x4e0cfb83	8.110	%1!*s!SourceTag: %2!d!
0x4e0cfb84	8.110	%1!*s!Call Stack:
0x4e0cfb85	8.110	%1!s!%2!.S!
0x4e0cfb86	8.110	%1!*s!%2
0x4e0cfb87	8.110	%1!*s!Invalid or malformed corruption record!
0x429	7	CHKDSK [volume[[path]filename]]] [/F] [/V] [/R] [/X] [/I] [/C] [/L[:size]] [/B]
0x42a	7	volume Specifies the drive letter (followed by a colon), mount point, or volume name.
0x42b	7	filename FAT/FAT32 only: Specifies the files to check for fragmentation.
0x42c	7	/F Fixes errors on the disk.
0x42d	7	/V On FAT/FAT32: Displays the full path and name of every file on the disk. On NTFS: Displays cleanup messages if any. /R Locates bad sectors and recovers readable information (implies /F). /L:size NTFS only: Changes the log file size to the specified number of kilobytes. If size is not specified, displays current size. /X Forces the volume to dismount first if necessary. All opened handles to the volume would then be invalid (implies /F). /I NTFS only: Performs a less vigorous check of index entries. /C NTFS only: Skips checking of cycles within the folder structure. /B NTFS only: Re-evaluates bad clusters on the volume (implies /R) The /I or /C switch reduces the amount of time required to run Chkdsk by skipping certain checks of the volume.
0x465	7	Windows has checked the file system and found no problems.
0x466	7	Windows has made corrections to the file system.
0x467	7	Windows found problems with the file system. Run CHKDSK with the /F (fix) option to correct these.
0x805	7	Formatting %1K
0x806	7	Formatting %1M
0x809	7	Verifying %1K
0x80a	7	Verifying %1M
0x80e	7	QuickFormatting %1K
0x80f	7	QuickFormatting %1M
0x812	7	FORMAT volume [/FS:file-system] [/V:label] [/Q] [/A:size] [/C] [/X] [/P:passes] [/S:state] FORMAT volume [/V:label] [/Q] [/F:size] [/P:passes]
0x815	7	FORMAT volume [/Q] volume Specifies the drive letter (followed by a colon), mount point, or volume name. /FS:filesystem Specifies the type of the file system (FAT, FAT32, exFAT, NTFS, or UDF).
0x819	78.1	/A:size Overrides the default allocation unit size. Default settings are strongly recommended for general use. NTFS supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K. FAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). exFAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M, 4M, 8M, 16M, 32M. Note that the FAT and FAT32 files systems impose the following restrictions on the number of clusters on a volume: FAT: Number of clusters <= 65526 FAT32: 65526 < Number of clusters < 4177918 Format will immediately stop processing if it decides that the above requirements cannot be met using the specified cluster size. NTFS compression is not supported for allocation unit sizes above 4096. /F:size Specifies the size of the floppy disk to format (1.44)
0x834	78.1	Allocation unit size must be less than or equal to 64K.
0x838	7	/P:passes Zero every sector on the volume passes times. This switch is not valid with /Q
0x839	7	The cluster size if illegal.
0x8d6	7	/S:state Where "state" is either "enable" or "disable"
0xbd5	78.1	Access Denied as you do not have sufficient privileges. You have to invoke this utility running in elevated mode.
0x1b62	7	Displays or changes file attributes. ATTRIB [+R \| -R] [+A \| -A ] [+S \| -S] [+H \| -H] [+I \| -I] [drive:][path][filename] [/S [/D] [/L]] + Sets an attribute. - Clears an attribute. R Read-only file attribute. A Archive file attribute. S System file attribute. H Hidden file attribute. I Not content indexed file attribute. [drive:][path][filename] Specifies a file or files for attrib to process. /S Processes matching files in the current folder and all subfolders. /D Processes folders as well. /L Work on the attributes of the Symbolic Link versus the target of the Symbolic Link
0x1b67	78.1	The /D switch is only valid with the /S switch.
0x2328	78.1
0x2329	78.1	Do not specify filename(s) Command Format: DISKCOPY [drive1: [drive2:]] [/1] [/V]
0x232a	78.1	Invalid drive specification. The specified drive does not exist or is non-removable.
0x232b	78.1	Cannot DISKCOPY to or from a network drive
0x232c	78.1	Formatting while copying
0x232d	78.1	Insert SOURCE disk in drive %1
0x232e	78.1	Insert TARGET disk in drive %1
0x232f	78.1	Make sure a disk is inserted into the drive and the drive door is closed
0x2330	78.1	The target disk may be unusable.
0x2331	78.1	The target disk is unusable.
0x2332	78.1	Copy another disk (Y/N)?
0x2333	78.1	Copying %1 tracks %2 sectors per track, %3 side(s)
0x2334	78.1	The drive types or disk types are not compatible.
0x2335	78.1	Unrecoverable read error on drive %1 side %2, track %3
0x2336	78.1	Unrecoverable write error on drive %1 side %2, track %3
0x2337	78.1	Copy process ended
0x2338	78.1	SOURCE disk bad or incompatible.
0x2339	78.1	TARGET disk bad or incompatible.
0x233c	78.1	Copies the contents of one floppy disk to another.
0x233d	78.1	DISKCOPY [drive1: [drive2:]] [/V]
0x233f	78.1	/V Verifies that the information is copied correctly.
0x2340	78.1	The two floppy disks must be the same type. You may specify the same drive for drive1 and drive2.
0x2341	78.1	Insert SOURCE disk in drive %1 Insert TARGET disk in drive %2
0x2342	78.1	Unrecognized format.
0x2343	78.1	Only an administrator can copy this disk.
0x2344	78.1	Cannot copy disk larger than %1 megabytes.
0x2345	78.1	Unrecognized media. Please insert the correct media into drive %1.
0x2346	78.1	There is no disk in the drive. Please insert a disk into drive %1.
0x2347	78.1	The disk in drive %1 is write-protected. Please use a writeable disk.
0x2710	78.1	Do not specify filename(s) Command format: DISKCOMP [drive1: [drive2:]] [/1] [/8]
0x2711	78.1	Invalid drive specification. The specified drive does not exist or is non-removable.
0x2713	78.1	Insert FIRST disk in drive %1
0x2714	78.1	Insert SECOND disk in drive %1
0x2715	78.1	FIRST disk is bad or incompatible
0x2716	78.1	SECOND disk is bad or incompatible
0x2717	78.1	Compare another disk (Y/N) ?
0x2718	78.1	Comparing %1 tracks %2 sectors per track, %3 side(s)
0x2719	78.1	The drive types or disk types are not compatible.
0x271a	78.1	Unrecoverable read error on drive %1 side %2, track %3
0x271b	78.1	Compare error on side %1, track %2
0x271c	78.1	Make sure a disk is inserted into the drive and the drive door is closed.
0x271d	78.1	Compare process ended.
0x271e	78.1	Compare OK
0x271f	78.1
0x2720	78.1	Compares the contents of two floppy disks.
0x2721	78.1	DISKCOMP [drive1: [drive2:]]
0x36b0	78.1	Compares the contents of two files or sets of files. COMP [data1] [data2] [/D] [/A] [/L] [/N=number] [/C] [/OFF[LINE]] data1 Specifies location and name(s) of first file(s) to compare. data2 Specifies location and name(s) of second files to compare. /D Displays differences in decimal format. /A Displays differences in ASCII characters. /L Displays line numbers for differences. /N=number Compares only the first specified number of lines in each file. /C Disregards case of ASCII letters when comparing files. /OFF[LINE] Do not skip files with offline attribute set. To compare sets of files, use wildcards in data1 and data2 parameters.
0x562c	7	Copies files and directory trees. XCOPY source [destination] [/A \| /M] [/D[:date]] [/P] [/S [/E]] [/V] [/W] [/C] [/I] [/Q] [/F] [/L] [/G] [/H] [/R] [/T] [/U] [/K] [/N] [/O] [/X] [/Y] [/-Y] [/Z] [/B] [/EXCLUDE:file1[+file2][+file3]...] source Specifies the file(s) to copy. destination Specifies the location and/or name of new files. /A Copies only files with the archive attribute set, doesn't change the attribute. /M Copies only files with the archive attribute set, turns off the archive attribute. /D:m-d-y Copies files changed on or after the specified date. If no date is given, copies only those files whose source time is newer than the destination time. /EXCLUDE:file1[+file2][+file3]... Specifies a list of files containing strings. Each string should be in a separate line in the files. When any of the strings match any part of the absolute path of the file to be copied, that file will be excluded from being copied. For example, specifying a string like \obj\ or .obj will exclude all files underneath the directory obj or all files with the .obj extension respectively. /P Prompts you before creating each destination file. /S Copies directories and subdirectories except empty ones. /E Copies directories and subdirectories, including empty ones. Same as /S /E. May be used to modify /T. /V Verifies the size of each new file. /W Prompts you to press a key before copying. /C Continues copying even if errors occur. /I If destination does not exist and copying more than one file, assumes that destination must be a directory. /Q Does not display file names while copying. /F Displays full source and destination file names while copying. /L Displays files that would be copied. /G Allows the copying of encrypted files to destination that does not support encryption. /H Copies hidden and system files also. /R Overwrites read-only files. /T Creates directory structure, but does not copy files. Does not include empty directories or subdirectories. /T /E includes empty directories and subdirectories. /U Copies only files that already exist in destination. /K Copies attributes. Normal Xcopy will reset read-only attributes. /N Copies using the generated short names. /O Copies file ownership and ACL information. /X Copies file audit settings (implies /O). /Y Suppresses prompting to confirm you want to overwrite an existing destination file. /-Y Causes prompting to confirm you want to overwrite an existing destination file. /Z Copies networked files in restartable mode. /B Copies the Symbolic Link itself versus the target of the link. /J Copies using unbuffered I/O. Recommended for very large files. The switch /Y may be preset in the COPYCMD environment variable. This may be overridden with /-Y on the command line.
0x6591	78.1	Deleting corrupt attribute record (%1, %2) from file record segment %3.
0x65cb	7	Corrupt uppercase Table. Using current system uppercase Table.
0x65d3	78.1	WARNING! F parameter not specified. Running CHKDSK in read-only mode.
0x6636	78.1	WARNING! I parameter specified.
0x6637	78.1	WARNING! C parameter specified.
0x664a	78.1	Unable to clear chkdsk ran once flag.
0x664f	7	The deleting of the USN Journal is in progress. Your volume cannot be checked at this time. Please wait a few minutes and try again.
0x6a20	78.1	The sparse flag in the standard information attribute in file 0x%1 is not set.
0x6fbf	78.1	%1 unindexed files recovered.
0x7759	7	BOOTMGR is missing
0x42b	8.1	filename FAT/FAT32 only: Specifies the files to check for fragmentation.
0x42d	8.1	/V On FAT/FAT32: Displays the full path and name of every file on the disk. On NTFS: Displays cleanup messages if any. /R Locates bad sectors and recovers readable information (implies /F, when /scan not specified). /L:size NTFS only: Changes the log file size to the specified number of kilobytes. If size is not specified, displays current size. /X Forces the volume to dismount first if necessary. All opened handles to the volume would then be invalid (implies /F). /I NTFS only: Performs a less vigorous check of index entries. /C NTFS only: Skips checking of cycles within the folder structure. /B NTFS only: Re-evaluates bad clusters on the volume (implies /R) /scan NTFS only: Runs a online scan on the volume /forceofflinefix NTFS only: (Must be used with "/scan") Bypass all online repair; all defects found are queued for offline repair (i.e. "chkdsk /spotfix"). /perf NTFS only: (Must be used with "/scan") Uses more system resources to complete a scan as fast as possible. This may have a negative performance impact on other tasks running on the system. /spotfix NTFS only: Runs spot fixing on the volume /sdcleanup NTFS only: Garbage collect unneeded security descriptor data (implies /F). /offlinescanandfix Runs an offline scan and fix on the volume. The /I or /C switch reduces the amount of time required to run Chkdsk by skipping certain checks of the volume.
0x474	8.1	Windows could not fix all issues with this drive. Please run chkdsk /f to find and fix all problems with this drive.
0x812	8.1	FORMAT volume [/FS:file-system] [/V:label] [/Q] [/L] [/A:size] [/C] [/I:state] [/X] [/P:passes] [/S:state] FORMAT volume [/V:label] [/Q] [/F:size] [/P:passes]
0x815	8.1	FORMAT volume [/Q] volume Specifies the drive letter (followed by a colon), mount point, or volume name. /FS:filesystem Specifies the type of the file system (FAT, FAT32, exFAT, NTFS, UDF).
0x84c	8.1	FORMAT volume [/Q] volume Specifies the drive letter (followed by a colon), mount point, or volume name. /FS:filesystem Specifies the type of the file system (FAT, FAT32, exFAT, NTFS, UDF, ReFS).
0x84d	8.1	/A:size Overrides the default allocation unit size. Default settings are strongly recommended for general use. ReFS supports 64K. NTFS supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K. FAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). FAT32 supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, (128K, 256K for sector size > 512 bytes). exFAT supports 512, 1024, 2048, 4096, 8192, 16K, 32K, 64K, 128K, 256K, 512K, 1M, 2M, 4M, 8M, 16M, 32M. Note that the FAT and FAT32 files systems impose the following restrictions on the number of clusters on a volume: FAT: Number of clusters <= 65526 FAT32: 65526 < Number of clusters < 4177918 Format will immediately stop processing if it decides that the above requirements cannot be met using the specified cluster size. NTFS compression is not supported for allocation unit sizes above 4096. /F:size Specifies the size of the floppy disk to format (1.44)
0x8db	8.1	/L NTFS Only: Use large size file records. By default, the volume will be formatted with small size file records.
0x1b62	8.1	Displays or changes file attributes. ATTRIB [+R \| -R] [+A \| -A ] [+S \| -S] [+H \| -H] [+I \| -I] [drive:][path][filename] [/S [/D] [/L]] + Sets an attribute. - Clears an attribute. R Read-only file attribute. A Archive file attribute. S System file attribute. H Hidden file attribute. I Not content indexed file attribute. X No scrub file attribute. V Integrity attribute. [drive:][path][filename] Specifies a file or files for attrib to process. /S Processes matching files in the current folder and all subfolders. /D Processes folders as well. /L Work on the attributes of the Symbolic Link versus the target of the Symbolic Link
0x562c	8.1	Copies files and directory trees. XCOPY source [destination] [/A \| /M] [/D[:date]] [/P] [/S [/E]] [/V] [/W] [/C] [/I] [/Q] [/F] [/L] [/G] [/H] [/R] [/T] [/U] [/K] [/N] [/O] [/X] [/Y] [/-Y] [/Z] [/B] [/J] [/EXCLUDE:file1[+file2][+file3]...] source Specifies the file(s) to copy. destination Specifies the location and/or name of new files. /A Copies only files with the archive attribute set, doesn't change the attribute. /M Copies only files with the archive attribute set, turns off the archive attribute. /D:m-d-y Copies files changed on or after the specified date. If no date is given, copies only those files whose source time is newer than the destination time. /EXCLUDE:file1[+file2][+file3]... Specifies a list of files containing strings. Each string should be in a separate line in the files. When any of the strings match any part of the absolute path of the file to be copied, that file will be excluded from being copied. For example, specifying a string like \obj\ or .obj will exclude all files underneath the directory obj or all files with the .obj extension respectively. /P Prompts you before creating each destination file. /S Copies directories and subdirectories except empty ones. /E Copies directories and subdirectories, including empty ones. Same as /S /E. May be used to modify /T. /V Verifies the size of each new file. /W Prompts you to press a key before copying. /C Continues copying even if errors occur. /I If destination does not exist and copying more than one file, assumes that destination must be a directory. /Q Does not display file names while copying. /F Displays full source and destination file names while copying. /L Displays files that would be copied. /G Allows the copying of encrypted files to destination that does not support encryption. /H Copies hidden and system files also. /R Overwrites read-only files. /T Creates directory structure, but does not copy files. Does not include empty directories or subdirectories. /T /E includes empty directories and subdirectories. /U Copies only files that already exist in destination. /K Copies attributes. Normal Xcopy will reset read-only attributes. /N Copies using the generated short names. /O Copies file ownership and ACL information. /X Copies file audit settings (implies /O). /Y Suppresses prompting to confirm you want to overwrite an existing destination file. /-Y Causes prompting to confirm you want to overwrite an existing destination file. /Z Copies networked files in restartable mode. /B Copies the Symbolic Link itself versus the target of the link. /J Copies using unbuffered I/O. Recommended for very large files. The switch /Y may be preset in the COPYCMD environment variable. This may be overridden with /-Y on the command line.
0x6679	8.1	Chkdsk scan speed is being throttled to reduce impact on system and application performance. Given the number of files and directories on the drive, Windows can scan the drive more efficiently if it has more memory available. To enable Chkdsk to use all available system memory and increase scan performance, please use the /perf switch.
0x7b71	8.1	Windows has found problems and some were fixed online; the remaining problems must be fixed offline. Please run chkdsk /spotfix to fix the issues.
0x7b72	8.1	Windows has found problems that must be fixed offline. Please run chkdsk /spotfix to fix the issues.
2058 entries