onex.dll
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x10000001 | 78.11011 | API |
| 0x10000002 | 78.11011 | EAP |
| 0x10000003 | 78.11011 | EAPPacket |
| 0x10000004 | 78.11011 | OneXUI |
| 0x10000005 | 78.11011 | Profile |
| 0x10000006 | 78.11011 | Semantic |
| 0x10000007 | 78.11011 | Supplicant |
| 0x10000008 | 78.11011 | User |
| 0x10000031 | 78.11011 | Response Time |
| 0x30000001 | 78.11011 | Start |
| 0x30000002 | 78.11011 | Stop |
| 0x300000b4 | 78.11011 | Start State |
| 0x300000b5 | 78.11011 | End State |
| 0x300000b6 | 78.11011 | Closed State |
| 0x300000b7 | 78.11011 | Open State |
| 0x300000b8 | 78.11011 | Connect State |
| 0x300000b9 | 78.11011 | Listen State |
| 0x300000ba | 78.11011 | Association State |
| 0x300000bb | 78.11011 | Authentication State |
| 0x300000bc | 78.11011 | Established State |
| 0x50000002 | 78.11011 | Error |
| 0x50000003 | 78.11011 | Warning |
| 0x50000004 | 78.11011 | Information |
| 0x70000001 | 78.11011 | API |
| 0x70000002 | 78.11011 | EAP |
| 0x70000003 | 78.11011 | MSM |
| 0x70000004 | 78.11011 | User |
| 0x70000005 | 78.11011 | Supplicant |
| 0x70000006 | 78.11011 | Profile |
| 0x70000007 | 78.11011 | Port |
| 0x90000001 | 78.11011 | Microsoft-Windows-OneX |
| 0x90000002 | 78.11011 | Microsoft-Windows-OneX/Diagnostic |
| 0x90000003 | 1011 | Microsoft-Windows-OneX/Operational |
| 0xb0000001 | 78.11011 | OneXDestroySupplicantPort |
| 0xb0000002 | 78.11011 | OneXStartAuthentication |
| 0xb0000003 | 78.11011 | OneXStopAuthentication |
| 0xb0000004 | 78.11011 | Port(%1): EAP error WinError=%2, ReasonCode=%3, EapMethod(Type=%4), RootCause is %5 |
| 0xb0000005 | 78.11011 | Port(%1): Account is disabled and user is non-domain joined. Authentication will be tried with alternate credentials profile. |
| 0xb0000006 | 78.11011 | Port(%1): EAP failure indication with error code %2 and reason code %3 |
| 0xb0000007 | 78.11011 | Port(%1): Saving updated user data of size (%2) |
| 0xb0000008 | 78.11011 | Port(%1): Saving updated connection data of size (%2) |
| 0xb0000009 | 78.11011 | Port(%1): Successfully received UI Response |
| 0xb000000a | 78.11011 | Port(%1): EapProcessPacketValidityAndGetResult returned action %2 |
| 0xb000000b | 78.11011 | Port(%1): EAP requested authentication restart |
| 0xb000000c | 78.11011 | Port(%3): EapHostPeerInitialize failed, error %1 |
| 0xb000000d | 78.11011 | Port(%3): EapHostPeerEndSession failed, error %1 |
| 0xb000000e | 78.11011 | Port(%3): OneXGeneratePacketEvent failed, error %1 |
| 0xb000000f | 78.11011 | Port(%3): OneXGeneratePeerAuthRestartedEvent failed, error %1 |
| 0xb0000010 | 78.11011 | Port(%3): EapHostPeerGetAuthStatus failed, error %1 |
| 0xb0000011 | 78.11011 | Port(%3): MSMUIRequest failed, error %1 |
| 0xb0000012 | 78.11011 | Port(%3): CompareSessionUserWithOwner failed, error %1 |
| 0xb0000013 | 78.11011 | Port(%3): ProcessEapHostTLV failed, error %1 |
| 0xb0000014 | 78.11011 | Port(%1): Cannot send UI Request (code=%2) to MSM since UI is disabled for the port |
| 0xb0000015 | 78.11011 | Port(%3): Error %1 in calling WTSQueryUserToken. Proposing machine authentication. |
| 0xb0000016 | 78.11011 | Port(%3): SupplicantGetUserTokenFromRuntimeState failed, error %1 |
| 0xb0000017 | 78.11011 | Port(%1): The auth mode is User only but an appropriate user can't be found |
| 0xb0000018 | 78.11011 | Port(%3): CompareOneXCredentials failed, error %1 |
| 0xb0000019 | 78.11011 | Port(%3): Failed to conditionally send Eapol start packet. Ignoring error %1 |
| 0xb000001a | 78.11011 | Port(%3): OneXGenerateForceAuthenticatedEvent failed, error %1 |
| 0xb000001b | 78.11011 | OneXValidateProfile failed, error %1, reason code %3 |
| 0xb000001c | 78.11011 | EAP dll requested to show UI, but the UI for the port is not allowed with current credentials |
| 0xb000001d | 78.11011 | The EAP method does not support key derivation and will not be used for discovery |
| 0xb000001e | 78.11011 | The EAP method does not support mutual authentication and will not be used for discovery |
| 0xb000001f | 78.11011 | Done with creating discovery profiles. Created %1 profiles |
| 0xb0000020 | 78.11011 | Created a 1X profile for discovery with eapType=%1 and AuthMode=%2 |
| 0xb0000021 | 78.11011 | The EAP method %1 is not allowed for media type %2 and will not be used for discovery |
| 0xb0000022 | 78.11011 | Port(%1): Successfully sent UI Request (code=%2) to MSM |
| 0xb0000023 | 78.11011 | Received a session change event (%1) |
| 0xb0000024 | 78.11011 | Finished initializing a new port with id=%1 and friendly name=%2 |
| 0xb0000025 | 78.11011 | Port(%1): MPPE-Send/Recv-Keys have been derived by supplicant |
| 0xb0000026 | 78.11011 | Port(%1): Sending UI Request (code=%2) to MSM |
| 0xb0000027 | 78.11011 | Port(%1): Asking MSM to delete user data for user token |
| 0xb0000028 | 78.11011 | Port(%1): Received an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
| 0xb0000029 | 78.11011 | Port(%1): Sent an Eapol start packet |
| 0xb000002a | 78.11011 | Port(%1): The supplicant is configured to not send an Eapol start packet |
| 0xb000002b | 78.11011 | Port(%1): Restarting authentication due to reason = %2 |
| 0xb000002c | 78.11011 | Port(%1): Authentication Starting |
| 0xb000002d | 78.11011 | Port(%1): Authentication Completed |
| 0xb000002e | 78.11011 | Port(%1): Time taken for this authentication = %2 ms |
| 0xb000002f | 78.11011 | Port(%1): 802.1X user identified. auth identity = %2, sessionId = %3, username=%4, domain=%5 |
| 0xb0000030 | 78.11011 | Port(%1): Stopping the current 802.1X authentication |
| 0xb0000031 | 78.11011 | Port(%1): Starting a new 802.1X authentication (%2) |
| 0xb0000032 | 78.11011 | Port(%1): Alternate credentials will be used for this profile |
| 0xb0000033 | 78.11011 | Port(%1): This is a discovery profile being attempted |
| 0xb0000034 | 78.11011 | Port(%1): Trying timely configuration |
| 0xb0000035 | 78.11011 | Port(%1): Completed the 802.1X authentication successfully |
| 0xb0000036 | 78.11011 | Port(%1): Completed the 802.1X authentication because no authenticator was found |
| 0xb0000037 | 78.11011 | Port(%1): The session id (%2) received with the UI response is different than the session id for which the request was sent (%3). Discarding this response |
| 0xb0000038 | 78.11011 | Port(%1): A pending UI request exists size=%2, sessionId=%3 |
| 0xb0000039 | 78.11011 | Port(%1): User auth proposed for sessionId=%3 (%2) |
| 0xb000003a | 78.11011 | Port(%1): The machine is in app server mode. Proposing machine auth |
| 0xb000003b | 78.11011 | EapHostPeerInvokeInteractiveUI failed, Error = %2 Reason = %3 |
| 0xb000003c | 78.11011 | No EAP Cred fields to display |
| 0xb000003d | 78.11011 | Creds conversion failed (error=%1) |
| 0xb000003e | 78.11011 | EapHostPeerQueryInteractiveUIInputFields failed (error=%1) |
| 0xb000003f | 78.11011 | Displaying the change password dialog - %1 |
| 0xb0000040 | 78.11011 | Port(%1): Sending an EAP packet length=%2, type=%3, identifier=%4, eapType=%5 |
| 0xb0000041 | 78.11011 | Port(%1): Identity being sent in the ResponseId packet is %2 |
| 0xb0000042 | 1011 | Port:(%1): Saving/Updating master copy of user data SupplicantIsUsingExplicitCreds:(%2) |
| 0xb0000044 | 1011 | Port(%1): Flushing User Data from Persistent Store SupplicantIsUsingExplicitCreds:(%2) |
| 0xb0000046 | 1011 | Port(%1):OneX Auth Timeout |
| 0xb000ea61 | 78.11011 | Error: %1 Location: %2 Context: %3 |
| 0xb000ea62 | 78.11011 | Warning: %1 Location: %2 Context: %3 |
| 0xb000ea63 | 78.11011 | Transitioned to State: %1 Context: %2 |
| 0xb000ea64 | 78.11011 | Updated Context: %1 Update Reason: %2 |
| 0xb000eac5 | 78.11011 | SourceAddress: %1 SourcePort: %2 DestinationAddress: %3 DestinationPort: %4 Protocol: %5 ReferenceContext: %6 |
| 0xb000eac7 | 78.11011 | Interface Guid: %1 IfIndex: %2 Interface Luid: %3 ReferenceContext: %4 |
| 0xd0000001 | 78.11011 | None |
| 0xd0000002 | 78.11011 | Notification |
| 0xd0000003 | 78.11011 | RequestId |
| 0xd0000004 | 78.11011 | Success |
| 0xd0000005 | 78.11011 | Fail |
| 0xd0000006 | 78.11011 | RequestOther |
| 0xd0000007 | 78.11011 | ResponseId |
| 0xd0000008 | 78.11011 | ResponseNak |
| 0xd0000009 | 78.11011 | ResponseOther |
| 0xd000000a | 78.11011 | PacketInvalid |
| 0xd000000b | 78.11011 | Console Connect |
| 0xd000000c | 78.11011 | Console Disconnect |
| 0xd000000d | 78.11011 | Remote Connect |
| 0xd000000e | 78.11011 | Remote Disconnect |
| 0xd000000f | 78.11011 | Session Logon |
| 0xd0000010 | 78.11011 | Session Logoff |
| 0xd0000011 | 78.11011 | Session Lock |
| 0xd0000012 | 78.11011 | Session Unlock |
| 0xd0000013 | 78.11011 | Remote Control |
| 0xd0000014 | 78.11011 | Discard |
| 0xd0000015 | 78.11011 | Send |
| 0xd0000016 | 78.11011 | Result |
| 0xd0000017 | 78.11011 | InvokeUI |
| 0xd0000018 | 78.11011 | Respond |
| 0xd0000019 | 78.11011 | StartAuthentication |
| 0xd000001a | 78.11011 | None |
| 0xd000001b | 78.11011 | Peer Initiated |
| 0xd000001c | 78.11011 | Msm Initiated |
| 0xd000001d | 78.11011 | OneX Held State Timeout |
| 0xd000001e | 78.11011 | OneX Auth Timeout |
| 0xd000001f | 78.11011 | OneX Configuration Changed |
| 0xd0000020 | 78.11011 | OneX User Changed |
| 0xd0000021 | 78.11011 | Quarantine State Changed |
| 0xd0000022 | 78.11011 | Alternate Creds Trial |
| 0xd0000023 | 78.11011 | Invalid |
| 0xd0000024 | 78.11011 | User change |
| 0xd0000025 | 78.11011 | MSM initiated |
| 0xd0000026 | 78.11011 | Config change |
| 0xd0000027 | 78.11011 | PLAP profile |
| 0xd0000028 | 78.11011 | TIMELY profile |
| 0xd0000029 | 78.11011 | User token specified |
| 0xd000002a | 78.11011 | Logged-on user token |
| 0xd000002b | 78.11011 | Success |
| 0xd000002c | 78.11011 | Failure |
| 151 entries | ||