ataport.sys
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x10000015 | 1011 | IO Performance measurement |
| 0x10000016 | 1011 | Read request |
| 0x10000017 | 1011 | Write request |
| 0x10000018 | 1011 | Paging Read request |
| 0x10000019 | 1011 | Paging Write request |
| 0x1000001a | 1011 | Low memory Read request |
| 0x1000001b | 1011 | Low memory write request |
| 0x1000001c | 1011 | Non-Read/Write request |
| 0x1000001d | 1011 | Pass-Through request |
| 0x1000001e | 1011 | Flush request |
| 0x1000001f | 1011 | Device I/O control request |
| 0x10000020 | 1011 | WMI request |
| 0x10000021 | 1011 | Power request |
| 0x10000022 | 1011 | PnP request |
| 0x10000023 | 1011 | Device enumeration handling |
| 0x10000024 | 1011 | Queue-related operation |
| 0x10000025 | 1011 | Interrupt Service Routine processing |
| 0x10000026 | 1011 | Deferred Procedure Call handling |
| 0x10000027 | 1011 | Timer-related operation |
| 0x10000028 | 1011 | Bus protocol specific operation |
| 0x10000029 | 1011 | Target-related operation |
| 0x1000002a | 1011 | Controller or Host Bus Adapter related operation |
| 0x1000002b | 1011 | Retry handling |
| 0x1000002c | 1011 | Timeout handling |
| 0x1000002d | 1011 | Reset handling |
| 0x1000002e | 1011 | Activity between port and miniport |
| 0x10000030 | 1011 | Testing-specific processing |
| 0x30000000 | 1011 | Info |
| 0x30000064 | 1011 | Dispatching of request. |
| 0x30000065 | 1011 | Completion of request. |
| 0x30000066 | 1011 | Request timeout handling. |
| 0x30000067 | 1011 | Request error handling. |
| 0x30000068 | 1011 | Retry handling. |
| 0x30000069 | 1011 | Miniport handling of request. |
| 0x3000006a | 1011 | Queue-related operation. |
| 0x3000006b | 1011 | State transition. |
| 0x50000004 | 1011 | Information |
| 0x50000005 | 1011 | Verbose |
| 0x70000001 | 1011 | LPM state change |
| 0x70000002 | 1011 | ATAport General |
| 0x700000c9 | 1011 | Port |
| 0xb0000000 | 1011 | Entering Partial state. |
| 0xb0000001 | 1011 | Entering Slumber state. |
| 0xb0000064 | 1011 | Device Enumeration Starts. |
| 0xb0000065 | 1011 | Device Enumeration Completes. |
| 0xb0000066 | 1011 | Transfer Mode Changed. |
| 0xb0000067 | 1011 | Request is Completed. |
| 0xb0000068 | 1011 | Request Timed Out. |
| 0xb0000069 | 1011 | Request Failed because of Transportation Error. |
| 0xb000006a | 1011 | Device Lost. |
| 0xb000006b | 1011 | Channel Reset Starts. |
| 0xb000006c | 1011 | Channel Reset Complets. |
| 0xb000006d | 1011 | Device Reset Starts. |
| 0xb000006e | 1011 | Device Reset Complets. |
| 0xb000006f | 1011 | Channel Start Phase Begins. |
| 0xb0000070 | 1011 | Channel Start Phase Completes. |
| 0xb0000071 | 1011 | Getting device and driver telemetry begins. |
| 0xb0000072 | 1011 | Getting device and driver telemetry completes. |
| 0xb0010071 | 1011 | Indicates device failure and the reason for it. |
| 0xb0010072 | 1011 | IO Transfer mode transition (either from DMA to PIO or vice versa). |
| 0xb00100c8 | 1011 | Request servicing time taken by target device. |
| 0xb00100c9 | 1011 | Request servicing time taken by lower driver stack(s). |
| 0xb00100ca | 1011 | Dispatching a read request. |
| 0xb00100cb | 1011 | Dispatching a write request. |
| 0xb00100d0 | 1011 | Completing an IO (read/write) request. |
| 0xb00100d1 | 1011 | Retrying an IO (read/write) request. |
| 0xb00100d2 | 1011 | Flush request. |
| 0xb00100d4 | 1011 | Dispatching an IOCTL. |
| 0xb00100d5 | 1011 | Dispatching a WMI request. |
| 0xb00100d6 | 1011 | Completing a non-read/write request. |
| 0xb00100d7 | 1011 | Dispatching a power request. |
| 0xb00100d8 | 1011 | Completing a power request. |
| 0xb00100d9 | 1011 | Dispatching a PnP request. |
| 0xb00100da | 1011 | Completing a PnP request. |
| 0xb00100db | 1011 | Completing a PnP enumeration request. |
| 0xb00100dc | 1011 | Performing a queue-related operation. |
| 0xb00100dd | 1011 | Dispatching a PassThrough request. |
| 77 entries | ||