Windows / Modules / bthport.sys

bthport.sys

Associated Error Codes

Below lists error codes and symbolic names found for this module.

CodeFound inDescription
0x300000001011Info
0x400500081011The remote adapter %2 successfully paired with the local adapter.
0x400500091011The remote adapter %2 was added to the list of personal devices.
0x4005000a1011The remote adapter %2 is no longer a paired device. Its link key has been removed.
0x4005000b1011The remote adapter %2 was removed from the list of personal devices.
0x4005000d1011The remote adapter %2 is no longer a bonded device; attempted use of the link key resulted in a PIN code request.
0x400500121011Windows cannot store Bluetooth authentication codes (link keys) on the local adapter. Bluetooth keyboards might not work in the system BIOS during startup.
0x400500151011Your Bluetooth adapter does not support headset, hands-free, or any other SCO-based profiles.
0x400500251011An incoming authentication request from a remote device %2 was rejected.
0x500000041011Information
0x800500031011A command sent to the adapter has timed out. The adapter did not respond.
0x800500061011Only one active Bluetooth adapter is supported at a time.
0x800500071011A hardware error occurred. The event contains the vendor-specific error code.
0x8005000c1011The local adapter returned an improper ACL data packet which was discarded.
0x8005000e1011A device with Bluetooth adapter address %2 has a bad service record (attribute identifier %3). The service will not be visible.
0x8005000f1011A device with Bluetooth adapter address %2 has a bad service record (attribute identifier %3). The attribute error was corrected.
0x800500171011Windows rejected a device partnership because it is in a non bondable mode.
0x800500181011Windows rejected a device connection because the device didn't establish encryption prior to the service level connection.
0x800500191011The local adapter does not support a critical Low Energy feature, the Low Energy functionality will therefore be disabled.
0x8005001a1011The local adapter does not support an important Low Energy controller state. The minimum required supported state mask is %2, got %3. Low Energy functionality is still enabled. This may increase power consumption.
0x8005001c1011The local adapter does not support Bluetooth Low Energy.
0x8005001d1011The Security Manager Protocol experienced a timeout waiting for a response from a remote device with address %2.
0x8005001f1011The local adapter does not support the minimum buffer requirement to support the hardware filtering of Bluetooth Low Energy advertisements. This may mean that your system will consume more power to process advertisements that are not intended for your system.
0x800500201011Hardware Offload limit is reached by the Bluetooth controller. This may mean that any new pattern will not be monitored by the Bluetooth controller.
0x800500221011The local adapter does not support an important Low Energy controller state to support peripheral mode. The minimum required supported state mask is %2, got %3. Low Energy peripheral role functionality will not be available.
0x800500301011The local adapter does not support reading the encryption key size for a connected device. Insecure devices may be able to connect to this system.
0x800500331011Windows dropped Active Peripheral Broadcast data from your Bluetooth device %2.
0xb00000011011A Bluetooth policy has changed. Policy %1\%2 has value of: %3
0xb00000021011Bluetooth radio enablement has been %3 due to policy %1\%2.
0xb00000031011Bluetooth radio has %3 advertising due to policy %1\%2.
0xb00000041011Bluetooth radio has %3 discoverability due to policy %1\%2.
0xb00000051011Bluetooth radio has %3 radio name as %4 due to policy %1\%2.
0xb00000061011Process %2 has attempted to pair to radio %1.
0xb00000071011Bluetooth has %1 service %2 on remote device %3 due to policy %4\%5...
0xb00000081011Bluetooth has %1 PSM %2 on remote device %3 due to policy %4\%5...
0xb00000091011A connection to a remote device %1 was successfully established.
0xb000000a1011An attempt to connect to a remote device %1 failed.
0xb000000b1011The minimum encryption key size requirement of %2 octets was enforced on a connection to the remote device %1. The key size is %3 octets.
0xb000000c1011A connection to the remote device %1 was rejected because it did not meet the minimum encryption key size requirement of %2 octets. The key size was %3 octets.
0xb10000e31011L2CAP_SIGNAL_REJECT
0xb10000e41011L2CAP_SIGNAL_CONNECT_REQUEST
0xb10000e51011L2CAP_SIGNAL_CONNECT_RESPONSE
0xb10000e61011L2CAP_SIGNAL_CONFIG_REQUEST
0xb10000e71011L2CAP_SIGNAL_CONFIG_RESPONSE
0xb10000e81011L2CAP_SIGNAL_DISCONNECT_REQUEST
0xb10000e91011L2CAP_SIGNAL_DISCONNECT_RESPONSE
0xb10000ea1011L2CAP_SIGNAL_ECHO_REQUEST
0xb10000eb1011L2CAP_SIGNAL_ECHO_RESPONSE
0xb10000ec1011L2CAP_SIGNAL_INFO_REQUEST
0xb10000ed1011L2CAP_SIGNAL_INFO_RESPONSE
0xb10000ee1011BRB_GET_LOCAL_BD_ADDR
0xb10000ef1011BRB_GET_LOCAL_SIGNAL_PARAMETERS
0xb10000f01011BRB_GET_DEVICE_INTERFACE_STRING
0xb10000f11011BRB_STORED_LINK_KEY
0xb10000f21011BRB_L2CA_REGISTER_SERVER
0xb10000f31011BRB_L2CA_UNREGISTER_SERVER
0xb10000f41011BRB_L2CA_OPEN_CHANNEL
0xb10000f51011BRB_L2CA_CLOSE_CHANNEL
0xb10000f61011BRB_L2CA_UPDATE_CHANNEL
0xb10000f71011BRB_L2CA_ACL_TRANSFER
0xb10000f81011BRB_L2CA_CHANNEL_PROPERTY
0xb10000f91011BRB_L2CA_PING
0xb10000fa1011BRB_L2CA_INFO_REQUEST
0xb10000fb1011BRB_PSM
0xb10000fc1011BRB_ACL_GET_MODE
0xb10000fd1011BRB_ACL_ENTER_ACTIVE_MODE
0xb10000fe1011BRB_ACL_ENTER_SNIFF_MODE
0xb10000ff1011BRB_ACL_ENTER_PARK_MODE
0xb10001001011BRB_ACL_ENTER_HOLD_MODE
0xb10001011011BRB_ACL_ENHANCED_FLUSH
0xb10001021011Complete a non-read IRP
0xb10001051011EVENT_TIE_ACTIVITY_ID
0xb10001061011Segmenting L2CAP packet into HCI Packets
0xb10001071011Write HCI Packet
0xb10001081011Read HCI Packet
0xb10001091011BRB_L2CA_REGISTER_FIXED_CHANNEL_SERVER
0xb100010a1011BRB_L2CA_UNREGISTER_FIXED_CHANNEL_SERVER
0xb100010b1011BRB_L2CA_SEND_FIXED_CHANNEL_DATA
0xb100012e1011BRB_L2CA_CONNECT_FIXED_CHANNEL
0xb10001361011RM_QUERY_RADIO_STATE
0xb10001371011RM_SET_RADIO_START
0xb10001381011RM_SET_RADIO_STOP
0xb10001391011RM_SET_DEVICE_POWER_START
0xb100013a1011RM_SET_DEVICE_POWER_STOP
0xc00500011011A version 1.0B Bluetooth adapter was inserted into the computer, but this version is not supported.
0xc00500021011The address of the local Bluetooth adapter is not valid.
0xc00500041011A required feature (LMP) is not supported by the adapter.
0xc00500051011The Bluetooth driver expected an HCI event with a certain size but did not receive it.
0xc00500061011The address for the local adapter changed. The driver has unloaded from this device due to this error.
0xc00500101011The mutual authentication between the local Bluetooth adapter and a device with Bluetooth adapter address %2 failed.
0xc00500111011The local Bluetooth adapter has failed in an undetermined manner and will not be used. The driver has been unloaded.
0xc00500131011Windows detected an error while storing the Bluetooth link key for adapter address %2 on the local adapter. The event contains the vendor-specific error code.
0xc00500141011Windows detected an error while deleting the Bluetooth link key for adapter address %2 on the local adapter. The event contains the vendor-specific error code.
0xc005001610Your Bluetooth device (%2) attempted to establish a debug connection. The Windows Bluetooth stack does not allow debug connection while it is not in the debug mode.
0xc005001b1011The local adapter does not support a critical Low Energy controller state. The minimum required supported state mask is %2, got %3.
0xc005001e1011The local adapter does not support an important Low Energy controller state. The minimum required supported state mask is %2, got %3. Low Energy functionality will be disabled.
0xc00500211011The Bluetooth controller or its firmware is incompatible with Windows. Please check Windows Update or your OEM website for an updated firmware or driver package.
0xc00500231011The device %2 is trying to distribute an Identity Resolving Key that is already used by a paired device. The pairing was rejected, if the intent was to pair with this device, you may need to first delete the existing pairing information.
0xc00500241011The device %2 is trying to distribute an Identity Address information that is already used by a paired device. The pairing was rejected, if the intent was to pair with this device, you may need to first delete the existing pairing information.
0xc005003110Windows rejected a connection from your Bluetooth device (%2) because the resulting encryption key size was smaller than the system required minimum.
0xc00500321011Windows rejected a legacy connection from your Bluetooth device %2 because the system is configured to not allow legacy connections by your system administrator.
0xd10000011011ACL_MODE_ACTIVE
0xd10000021011ACL_MODE_HOLD
0xd10000031011ACL_MODE_SNIFF
0xd10000041011ACL_MODE_PARK
0xd10000051011ACL_MODE_ENTER_ACTIVE
0xd10000061011ACL_MODE_ENTER_HOLD
0xd10000071011ACL_MODE_ENTER_SNIFF
0xd10000081011ACL_MODE_ENTER_PARK
0xd10000091011ACL_DISCONNECTED
0xd100000a1011Sending packet to radio
0xd100000b1011Packet received from radio
0xd100000c1011Packet timed out
0xd100000d1011L2CAP received a packet
0xd100000e1011L2CAP is completing a packet
0xd100000f1011Radio State Unknown
0xd10000101011Radio On Pending
0xd10000111011Radio On
0xd10000121011Radio Off Pending
0xd10000131011Radio Off
0xd10000141011Unspecified
0xd10000151011D0
0xd10000161011D1
0xd10000171011D2
0xd10000181011D3
0xd10000191011Unspecified
0xd100001a1011S0
0xd100001b1011S1
0xd100001c1011S2
0xd100001d1011S3
0xd100001e1011S4-Hibernate
0xd100001f1011S5-Shutdown
0xd10000201011S6
0xc005001611Your Bluetooth device %2 attempted to establish a debug connection. The Windows Bluetooth stack does not allow debug connection while it is not in the debug mode.
0xc005003111Windows rejected a connection from your Bluetooth device %2 because the resulting encryption key size was smaller than the system required minimum.
135 entries