ws2_32.dll
Associated Error Codes
Below lists error codes and symbolic names found for this module.
| Code | Found in | Description |
|---|---|---|
| 0x11000001 | 78.110 | Datagram socket |
| 0x11000002 | 78.110 | Stream socket |
| 0x11000003 | 78.110 | Winsock initiated event |
| 0x11000004 | 78.110 | Transport initiated event |
| 0x11000005 | 78.110 | Fastpath I/O |
| 0x11000006 | 78.110 | Buffered |
| 0x11000007 | 8.110 | RIO |
| 0x11000008 | 10 | NRT |
| 0x12000034 | 78.110 | SQM |
| 0x3100000a | 78.110 | Open |
| 0x3100000b | 78.110 | Bound |
| 0x3100000c | 78.110 | Connected |
| 0x3100000d | 78.110 | Disconnected |
| 0x3100000e | 78.110 | Aborted |
| 0x3100000f | 78.110 | Closed |
| 0x31000010 | 78.110 | Freed |
| 0x31000011 | 8.110 | Modified |
| 0x33000000 | 8.110 | Info |
| 0x51000002 | 78.110 | Error |
| 0x51000003 | 8.110 | Warning |
| 0x51000004 | 78.11011 | Information |
| 0x51000005 | 78.11011 | Verbose |
| 0x90000001 | 78.11011 | Microsoft-Windows-Winsock Catalog Change |
| 0x90000002 | 78.11011 | Microsoft-Windows-Winsock Catalog Change/Operational |
| 0x91000001 | 78.110 | Microsoft-Windows-Winsock Network Event |
| 0x91000002 | 78.110 | Microsoft-Windows-Winsock Network Event/Operational |
| 0x93000001 | 8.110 | Microsoft-Windows-Winsock NameResolution Event |
| 0x93000002 | 8.110 | Microsoft-Windows-Winsock NameResolution Event/Operational |
| 0xb0000001 | 78.11011 | LSP %1 was installed in the %2-bit catalog by %3 (GUID=%4, Category ID=%5) |
| 0xb0000002 | 78.11011 | LSP %1 was removed from the %2-bit catalog by %3 (GUID=%4, Category ID=%5) |
| 0xb0000003 | 78.11011 | LSP %1 was disabled in the %2-bit catalog by %3 (GUID=%4, Category ID=%5) |
| 0xb0000004 | 78.11011 | The %1-bit catalog was reset by the administrator |
| 0xb1000001 | 78.110 | Socket creation: %1 %2 %3 %4 %5 |
| 0xb1000002 | 78.110 | Socket bind: %1 %2 %3 %4 %5 |
| 0xb1000004 | 78.110 | Socket connect: %1 %2 %3 %4 |
| 0xb1000006 | 78.110 | Connect completed: %1 %2 %3 |
| 0xb1000007 | 78.110 | AFD initiated abort: %1 %2 %3 |
| 0xb1000008 | 78.110 | Transport initiated abort: %1 %2 %3 |
| 0xb1000009 | 78.110 | Failed send request: %1 %2 %3 |
| 0xb100000a | 78.110 | Failed WSASendMsg request: %1 %2 %3 |
| 0xb100000b | 78.110 | Failed recv request: %1 %2 %3 |
| 0xb100000c | 78.110 | Failed recvfrom request: %1 %2 %3 |
| 0xb100000d | 78.110 | Socket close: %1 %2 %3 |
| 0xb100000e | 78.110 | Socket cleanup (all references removed): %1 %2 %3 |
| 0xb100000f | 78.110 | Socket accept: %1 %2 %3 %4 %5 |
| 0xb1000011 | 78.110 | Accept failed: %1 %2 %3 |
| 0xb1000012 | 78.110 | Send posted: %1 %2 %3 %4 %5 %6 |
| 0xb1000013 | 78.110 | Receive posted: %1 %2 %3 %4 %5 %6 |
| 0xb1000014 | 78.110 | RecvFrom posted: %1 %2 %3 %4 %5 %6 |
| 0xb1000015 | 78.110 | SendTo posted: %1 %2 %3 %4 %5 %6 %7 %8 |
| 0xb1000017 | 78.110 | Recv completed: %1 %2 %3 %4 |
| 0xb1000018 | 78.110 | Send completed: %1 %2 %3 %4 |
| 0xb1000019 | 78.110 | SendMsg completed: %1 %2 %3 %4 |
| 0xb100001a | 78.110 | RecvFrom completed: %1 %2 %3 %4 %5 %6 %7 |
| 0xb100001c | 78.110 | SendTo completed: %1 %2 %3 %4 |
| 0xb100001d | 78.110 | Socket option set: %1 %2 %3 %4 |
| 0xb100001e | 78.110 | Select/Poll posted: %1 %2 %3 |
| 0xb100001f | 78.110 | Select/Poll completed: %1 %2 %3 |
| 0xb1000020 | 78.110 | WSAEventSelect: %1 %2 %3 |
| 0xb1000021 | 78.110 | Datagram dropped: %1 %2 %3 %4 %5 %6 |
| 0xb1000023 | 78.110 | Connection indicated: %1 %2 %3 %4 |
| 0xb1000025 | 78.110 | Data indicated from transport: %1 %2 %3 |
| 0xb1000026 | 78.110 | Data indicated from transport: %1 %2 %3 %4 %5 |
| 0xb1000028 | 78.110 | Failed bind: %1 %2 %3 |
| 0xb1000029 | 78.110 | Disconnect indicated from transport: %1 %2 |
| 0xb10003e8 | 78.110 | socket: %1: Process %3 (%8), Endpoint %4, Family %5, Type %6, Protocol %7, Seq %2, Status %9 |
| 0xb10003e9 | 78.110 | closesocket: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb10003ea | 78.110 | socket cleanup: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb10003eb | 78.110 | send: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb10003ec | 78.110 | recv: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb10003ed | 78.110 | sendto: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb10003ee | 78.110 | recvfrom: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb10003ef | 78.110 | sendto: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb10003f1 | 78.110 | recvfrom: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb10003f3 | 78.110 | sendmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb10003f4 | 78.110 | recvmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb10003f5 | 78.110 | sendmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb10003f7 | 78.110 | recvmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb10003f9 | 78.110 | connect: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb10003fa | 78.110 | connect: %1: Process %3, Endpoint %4, Address %9, Seq %2, Status %7 |
| 0xb10003fc | 78.110 | ConnectEx: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb10003fd | 78.110 | ConnectEx: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %9, Seq %2, Status %7 |
| 0xb10003ff | 78.110 | accept: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb1000400 | 78.110 | accept: %1: Process %3, Endpoint %4, Address %9, Accept Endpoint %10, Current Backlog %11, Seq %2, Status %7 |
| 0xb1000402 | 78.110 | AcceptEx: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb1000403 | 78.110 | AcceptEx: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %9, Accept Endpoint %10, Current Backlog %11, Seq %2, Status %7 |
| 0xb1000405 | 78.110 | bind: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb1000406 | 78.110 | bind: %1: Process %3, Endpoint %4, Address %7, Seq %2, Status %5 |
| 0xb1000408 | 78.110 | connection aborted: %1: Process %3, Endpoint %4, Seq %2, Reason %5 |
| 0xb1000409 | 78.110 | datagram dropped: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %8, Seq %2, Reason %9 |
| 0xb100040b | 78.110 | Socket option: %1: Process %3, Endpoint %4, Option %5, Value %6, Seq %2, Status %7 |
| 0xb100040c | 78.110 | Wait for listen: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb100040d | 78.110 | Listen: %1: Process %3, Endpoint %4, Backlog %5, Seq %2, Status %6 |
| 0xb1000bb8 | 78.110 | Connect indication: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb1000bb9 | 78.110 | Connect indication: %1: Process %3, Endpoint %4, Address %7, Backlog Count %8, Seq %2, Status %5 |
| 0xb1000bbb | 78.110 | Data indication: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Seq %2 |
| 0xb1000bbc | 78.110 | Data indication: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %8, Seq %2 |
| 0xb1000bbe | 78.110 | disconnect indicated: %1: Process %3, Endpoint %4, Seq %2 |
| 0xb1000bbf | 78.110 | Transport send backlog: Process %1, Endpoint %2, Send Backlog %5 |
| 0xb1000fa0 | 8.110 | Registration domain %1 create status %2 |
| 0xb1000fa1 | 8.110 | Registration domain %1 closed |
| 0xb1000fa2 | 8.110 | CQ %1 created with %3 entries, index %7 and notification type %8, status %13 |
| 0xb1000fa3 | 8.110 | CQ %1 closed with %2 commit |
| 0xb1000fa4 | 8.110 | CQ %1 cleaned up |
| 0xb1000fa5 | 8.110 | CQ %1 with %5 commit resized from %2 to %6, status %10 |
| 0xb1000fa6 | 8.110 | RQ %2 created on endpoint %1 with %8 receive and %4 send entries, using receive CQ %13 and send CQ %12, status %14 |
| 0xb1000fa7 | 8.110 | RQ %1 closed, receive = (%2,%3) send = (%4,%5) |
| 0xb1000fa8 | 8.110 | RQ %1 cleaned up |
| 0xb1000fa9 | 8.110 | RQ %1 resized from (%9,%2) to (%12,%5), status = %16 |
| 0xb1000faa | 8.110 | Buffer %1 registered with address %3 and length %5, system address = %4, ID = %6, status = %7 |
| 0xb1000fab | 8.110 | Buffer %1 deregistered with %2 references |
| 0xb1000fac | 8.110 | Buffer %1 cleaned up |
| 0xb1000fad | 8.110 | RQ %2 using invalid buffer ID %3 |
| 0xb1000fae | 8.110 | RQ %2 invalid use of buffer %3, offset = %4, length = %5 |
| 0xb1000faf | 8.110 | RQ %1 using invalid buffer size for %2, specified = %3, required = %4 |
| 0xb1000fb0 | 10 | NRT Create: Handle = %1 Process = %2 Status = %3 |
| 0xb1000fb1 | 10 | NRT Close: Handle = %1 Process = %2 |
| 0xb1000fb3 | 10 | accept %1 [1 = Pause, 0 = Unpause] %5 Seq %2 Endpoint %3 Process %4 TlBacklogCount %6. |
| 0xb30003e8 | 8.110 | GetAddrInfoW is called for queryName %1, serviceName %2, flags %4, family %5, socketType %6, protocol %7 and seq %3 |
| 0xb30003e9 | 8.110 | GetAddrInfoW is completed for queryName %1 with status %2 and result %3 |
| 0xb30003ea | 8.110 | GetAddrInfoExW is called for queryName %1, serviceName %2, nameSpace %4, nameSpace GUID %5, flags %6, family %7, socketType %8, protocol %9, interface index %10, timeOut %11, asyncWithCallBack %12, asyncWithOverlapped %13 and seq %3 |
| 0xb30003eb | 8.110 | GetAddrInfoExW asynchronous query is pending for queryName: %1 with cancel Handle %2 |
| 0xb30003ec | 8.110 | GetAddrInfoExW is completed for queryName %1 with status %2 and result %3 |
| 0xb30003ed | 8.110 | GetAddrInfoExCancel is called for query %1 and seq %2 |
| 0xb30003ee | 8.110 | NSPLookupServiceBegin is called for provider %1, queryName %2, serviceGUID %3, interface index %4 and control flags %5 |
| 0xb30003ef | 8.110 | NSPLookupServiceBegin is completed for provider %1, queryName %2 serviceGUID %3, interface index %4, control flags %5 and lookup handle %6 with status %7 |
| 0xb30003f0 | 8.110 | NSPLookupServiceNext is called for provider %1, control Flags %2 and lookup handle %3 |
| 0xb30003f1 | 8.110 | NSPLookupServiceNext is completed for provider %1, control Flags %2 and lookup Handle %3 with status %4 and result %5 |
| 0xb30003f2 | 8.110 | NSPLookupServiceEnd is called for provider %1 and lookup handle %2 |
| 0xb30003f3 | 8.110 | NSPLookupServiceEnd completed for provider %1 and lookup handle %2 with status %3 |
| 0xb30003f4 | 10 | GetAddrInfoExW info. queryName %1, serviceName %2, nameSpace %4, nameSpace GUID %5, flags %6, family %7, socketType %8, protocol %9, interface index %10, timeOut %11, asyncWithCallBack %12, asyncWithOverlapped %13, error %14 and seq %3 |
| 0xb30003f5 | 10 | Wsa Startup. seq: %1. |
| 0xb30003f6 | 10 | Wsa Cleanup. seq: %1. Refcount: %2. |
| 0xb30003f7 | 10 | NSJOB info. seq %1. Refcount: %2. |
| 0xd1000001 | 78.110 | SOCK_STREAM |
| 0xd1000002 | 78.110 | SOCK_DGRAM |
| 0xd1000003 | 78.110 | SOCK_RAW |
| 0xd1000004 | 78.110 | SOCK_RDM |
| 0xd1000005 | 78.110 | SOCK_SEQPACKET |
| 0xd1000006 | 78.110 | Attempt to flush pending receive requests failed |
| 0xd1000007 | 78.110 | Abortive disconnect requested on endpoint |
| 0xd1000008 | 78.110 | Shutdown with SD_RECEIVE posted with receive data pending |
| 0xd1000009 | 78.110 | Transport indicated abortive disconnect |
| 0xd100000a | 78.110 | Error on accepted connection not associated with listening socket |
| 0xd100000b | 78.110 | Disconnect failed |
| 0xd100000c | 78.110 | Pending data on connection when disconnect called |
| 0xd100000d | 78.110 | Invalid buffer specified on fastio receive |
| 0xd100000e | 78.110 | Accept operation failed |
| 0xd100000f | 78.110 | Unable to allocate buffer |
| 0xd1000010 | 78.110 | Counter overflow |
| 0xd1000011 | 78.110 | Data arrives after shutting down receive path |
| 0xd1000012 | 78.110 | Data arrives during endpoint cleanup |
| 0xd1000013 | 78.110 | Receive request failed |
| 0xd1000014 | 78.110 | Send request failed |
| 0xd1000015 | 78.110 | Send request cancelled |
| 0xd1000016 | 78.110 | TransmitPackets/TransmitFile request cancelled |
| 0xd1000017 | 78.110 | Abort indicated during connection request |
| 0xd1000018 | 78.110 | Plug and play event caused abort |
| 0xd1000019 | 78.110 | Datagram source address does not match connected address |
| 0xd100001a | 78.110 | Insufficient local buffer space |
| 0xd100001b | 78.110 | Buffer allocation failed |
| 0xd100001c | 78.110 | Insufficient local buffer space - circular queueing enabled |
| 0xd100001d | 78.110 | Indicated datagram too large - integer overflow |
| 0xd100001e | 78.110 | SO_OOBINLINE |
| 0xd100001f | 78.110 | FIONBIO |
| 0xd1000020 | 78.110 | SO_RCVBUF |
| 0xd1000021 | 78.110 | SO_SNDBUF |
| 0xd1000022 | 78.110 | SIO_ENABLE_CIRCULAR_QUEUEING |
| 0xd1000023 | 78.110 | SIO_UDP_CONNRESET |
| 0xd1000024 | 78.110 | AFD_IPV6_V6ONLY |
| 0xd1000025 | 78.110 | SIO_UDP_NETRESET |
| 0xd1000026 | 8.110 | None |
| 0xd1000027 | 8.110 | Event |
| 0xd1000028 | 8.110 | IOCP |
| 0xd1000029 | 8.110 | source address |
| 0xd100002a | 8.110 | destination address |
| 0xd100002b | 8.110 | flags |
| 0xd100002c | 8.110 | control |
| 0xd100002d | 8.110 | send |
| 0xd100002e | 8.110 | receive |
| 0x12000001 | 11 | Datagram socket |
| 0x12000002 | 11 | Stream socket |
| 0x12000003 | 11 | Winsock initiated event |
| 0x12000004 | 11 | Transport initiated event |
| 0x12000005 | 11 | Fastpath I/O |
| 0x12000006 | 11 | Buffered |
| 0x12000007 | 11 | RIO |
| 0x12000008 | 11 | NRT |
| 0x13000034 | 11 | SQM |
| 0x31000001 | 11 | Start |
| 0x31000002 | 11 | Stop |
| 0x3200000a | 11 | Open |
| 0x3200000b | 11 | Bound |
| 0x3200000c | 11 | Connected |
| 0x3200000d | 11 | Disconnected |
| 0x3200000e | 11 | Aborted |
| 0x3200000f | 11 | Closed |
| 0x32000010 | 11 | Freed |
| 0x32000011 | 11 | Modified |
| 0x34000000 | 11 | Info |
| 0x52000002 | 11 | Error |
| 0x52000003 | 11 | Warning |
| 0x91000001 | 11 | Microsoft-Windows-Winsock-Sockets sockets provider |
| 0x92000001 | 11 | Microsoft-Windows-Winsock Network Event |
| 0x92000002 | 11 | Microsoft-Windows-Winsock Network Event/Operational |
| 0x94000001 | 11 | Microsoft-Windows-Winsock NameResolution Event |
| 0x94000002 | 11 | Microsoft-Windows-Winsock NameResolution Event/Operational |
| 0xb0000005 | 11 | LSP %1 was bypassed as due to legacy technology bypass policy (GUID=%2) |
| 0xb2000001 | 11 | Socket creation: %1 %2 %3 %4 %5 |
| 0xb2000002 | 11 | Socket bind: %1 %2 %3 %4 %5 |
| 0xb2000004 | 11 | Socket connect: %1 %2 %3 %4 |
| 0xb2000006 | 11 | Connect completed: %1 %2 %3 |
| 0xb2000007 | 11 | AFD initiated abort: %1 %2 %3 |
| 0xb2000008 | 11 | Transport initiated abort: %1 %2 %3 |
| 0xb2000009 | 11 | Failed send request: %1 %2 %3 |
| 0xb200000a | 11 | Failed WSASendMsg request: %1 %2 %3 |
| 0xb200000b | 11 | Failed recv request: %1 %2 %3 |
| 0xb200000c | 11 | Failed recvfrom request: %1 %2 %3 |
| 0xb200000d | 11 | Socket close: %1 %2 %3 |
| 0xb200000e | 11 | Socket cleanup (all references removed): %1 %2 %3 |
| 0xb200000f | 11 | Socket accept: %1 %2 %3 %4 %5 |
| 0xb2000011 | 11 | Accept failed: %1 %2 %3 |
| 0xb2000012 | 11 | Send posted: %1 %2 %3 %4 %5 %6 |
| 0xb2000013 | 11 | Receive posted: %1 %2 %3 %4 %5 %6 |
| 0xb2000014 | 11 | RecvFrom posted: %1 %2 %3 %4 %5 %6 |
| 0xb2000015 | 11 | SendTo posted: %1 %2 %3 %4 %5 %6 %7 %8 |
| 0xb2000017 | 11 | Recv completed: %1 %2 %3 %4 |
| 0xb2000018 | 11 | Send completed: %1 %2 %3 %4 |
| 0xb2000019 | 11 | SendMsg completed: %1 %2 %3 %4 |
| 0xb200001a | 11 | RecvFrom completed: %1 %2 %3 %4 %5 %6 %7 |
| 0xb200001c | 11 | SendTo completed: %1 %2 %3 %4 |
| 0xb200001d | 11 | Socket option set: %1 %2 %3 %4 |
| 0xb200001e | 11 | Select/Poll posted: %1 %2 %3 |
| 0xb200001f | 11 | Select/Poll completed: %1 %2 %3 |
| 0xb2000020 | 11 | WSAEventSelect: %1 %2 %3 |
| 0xb2000021 | 11 | Datagram dropped: %1 %2 %3 %4 %5 %6 |
| 0xb2000023 | 11 | Connection indicated: %1 %2 %3 %4 |
| 0xb2000025 | 11 | Data indicated from transport: %1 %2 %3 |
| 0xb2000026 | 11 | Data indicated from transport: %1 %2 %3 %4 %5 |
| 0xb2000028 | 11 | Failed bind: %1 %2 %3 |
| 0xb2000029 | 11 | Disconnect indicated from transport: %1 %2 |
| 0xb20003e8 | 11 | socket: %1: Process %3 (%8), Endpoint %4, Family %5, Type %6, Protocol %7, Seq %2, Status %9 |
| 0xb20003e9 | 11 | closesocket: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb20003ea | 11 | socket cleanup: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb20003eb | 11 | send: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb20003ec | 11 | recv: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb20003ed | 11 | sendto: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb20003ee | 11 | recvfrom: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb20003ef | 11 | sendto: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb20003f1 | 11 | recvfrom: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb20003f3 | 11 | sendmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb20003f4 | 11 | recvmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Seq %2, Status %8 |
| 0xb20003f5 | 11 | sendmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb20003f7 | 11 | recvmsg: %1: Process %3, Endpoint %4, Buffer Count %5, Buffer %6, Length %7, Addr %10, Seq %2, Status %8 |
| 0xb20003f9 | 11 | connect: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb20003fa | 11 | connect: %1: Process %3, Endpoint %4, Address %9, Seq %2, Status %7 |
| 0xb20003fc | 11 | ConnectEx: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb20003fd | 11 | ConnectEx: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %9, Seq %2, Status %7 |
| 0xb20003ff | 11 | accept: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb2000400 | 11 | accept: %1: Process %3, Endpoint %4, Address %9, Accept Endpoint %10, Current Backlog %11, Seq %2, Status %7 |
| 0xb2000402 | 11 | AcceptEx: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb2000403 | 11 | AcceptEx: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %9, Accept Endpoint %10, Current Backlog %11, Seq %2, Status %7 |
| 0xb2000405 | 11 | bind: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb2000406 | 11 | bind: %1: Process %3, Endpoint %4, Address %7, Seq %2, Status %5 |
| 0xb2000408 | 11 | connection aborted: %1: Process %3, Endpoint %4, Seq %2, Reason %5 |
| 0xb2000409 | 11 | datagram dropped: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %8, Seq %2, Reason %9 |
| 0xb200040b | 11 | Socket option: %1: Process %3, Endpoint %4, Option %5, Value %6, Seq %2, Status %7 |
| 0xb200040c | 11 | Wait for listen: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb200040d | 11 | Listen: %1: Process %3, Endpoint %4, Backlog %5, Seq %2, Status %6 |
| 0xb2000bb8 | 11 | Connect indication: %1: Process %3, Endpoint %4, Seq %2, Status %5 |
| 0xb2000bb9 | 11 | Connect indication: %1: Process %3, Endpoint %4, Address %7, Backlog Count %8, Seq %2, Status %5 |
| 0xb2000bbb | 11 | Data indication: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Seq %2 |
| 0xb2000bbc | 11 | Data indication: %1: Process %3, Endpoint %4, Buffer %5, Length %6, Address %8, Seq %2 |
| 0xb2000bbe | 11 | disconnect indicated: %1: Process %3, Endpoint %4, Seq %2 |
| 0xb2000bbf | 11 | Transport send backlog: Process %1, Endpoint %2, Send Backlog %5 |
| 0xb2000fa0 | 11 | Registration domain %1 create status %2 |
| 0xb2000fa1 | 11 | Registration domain %1 closed |
| 0xb2000fa2 | 11 | CQ %1 created with %3 entries, index %7 and notification type %8, status %13 |
| 0xb2000fa3 | 11 | CQ %1 closed with %2 commit |
| 0xb2000fa4 | 11 | CQ %1 cleaned up |
| 0xb2000fa5 | 11 | CQ %1 with %5 commit resized from %2 to %6, status %10 |
| 0xb2000fa6 | 11 | RQ %2 created on endpoint %1 with %8 receive and %4 send entries, using receive CQ %13 and send CQ %12, status %14 |
| 0xb2000fa7 | 11 | RQ %1 closed, receive = (%2,%3) send = (%4,%5) |
| 0xb2000fa8 | 11 | RQ %1 cleaned up |
| 0xb2000fa9 | 11 | RQ %1 resized from (%9,%2) to (%12,%5), status = %16 |
| 0xb2000faa | 11 | Buffer %1 registered with address %3 and length %5, system address = %4, ID = %6, status = %7 |
| 0xb2000fab | 11 | Buffer %1 deregistered with %2 references |
| 0xb2000fac | 11 | Buffer %1 cleaned up |
| 0xb2000fad | 11 | RQ %2 using invalid buffer ID %3 |
| 0xb2000fae | 11 | RQ %2 invalid use of buffer %3, offset = %4, length = %5 |
| 0xb2000faf | 11 | RQ %1 using invalid buffer size for %2, specified = %3, required = %4 |
| 0xb2000fb0 | 11 | NRT Create: Handle = %1 Process = %2 Status = %3 |
| 0xb2000fb1 | 11 | NRT Close: Handle = %1 Process = %2 |
| 0xb2000fb2 | 11 | CQ %5 notify %1 Seq %2 Status %6 |
| 0xb2000fb3 | 11 | accept %1 [1 = Pause, 0 = Unpause] %5 Seq %2 Endpoint %3 Process %4 TlBacklogCount %6. |
| 0xb2000fb4 | 11 | RQ %2 invalid buffer sharing ID %3 sharing type %4 |
| 0xb40003e8 | 11 | GetAddrInfoW is called for queryName %1, serviceName %2, flags %4, family %5, socketType %6, protocol %7 and seq %3 |
| 0xb40003e9 | 11 | GetAddrInfoW is completed for queryName %1 with status %2 and result %3 |
| 0xb40003ea | 11 | GetAddrInfoExW is called for queryName %1, serviceName %2, nameSpace %4, nameSpace GUID %5, flags %6, family %7, socketType %8, protocol %9, interface index %10, timeOut %11, asyncWithCallBack %12, asyncWithOverlapped %13 and seq %3 |
| 0xb40003eb | 11 | GetAddrInfoExW asynchronous query is pending for queryName: %1 with cancel Handle %2 |
| 0xb40003ec | 11 | GetAddrInfoExW is completed for queryName %1 with status %2 and result %3 |
| 0xb40003ed | 11 | GetAddrInfoExCancel is called for query %1 and seq %2 |
| 0xb40003ee | 11 | NSPLookupServiceBegin is called for provider %1, queryName %2, serviceGUID %3, interface index %4 and control flags %5 |
| 0xb40003ef | 11 | NSPLookupServiceBegin is completed for provider %1, queryName %2 serviceGUID %3, interface index %4, control flags %5 and lookup handle %6 with status %7 |
| 0xb40003f0 | 11 | NSPLookupServiceNext is called for provider %1, control Flags %2 and lookup handle %3 |
| 0xb40003f1 | 11 | NSPLookupServiceNext is completed for provider %1, control Flags %2 and lookup Handle %3 with status %4 and result %5 |
| 0xb40003f2 | 11 | NSPLookupServiceEnd is called for provider %1 and lookup handle %2 |
| 0xb40003f3 | 11 | NSPLookupServiceEnd completed for provider %1 and lookup handle %2 with status %3 |
| 0xb40003f4 | 11 | GetAddrInfoExW info. queryName %1, serviceName %2, nameSpace %4, nameSpace GUID %5, flags %6, family %7, socketType %8, protocol %9, interface index %10, timeOut %11, asyncWithCallBack %12, asyncWithOverlapped %13, error %14 and seq %3 |
| 0xb40003f5 | 11 | Wsa Startup. seq: %1. |
| 0xb40003f6 | 11 | Wsa Cleanup. seq: %1. Refcount: %2. |
| 0xb40003f7 | 11 | NSJOB info. seq %1. Refcount: %2. |
| 0xd2000001 | 11 | SOCK_STREAM |
| 0xd2000002 | 11 | SOCK_DGRAM |
| 0xd2000003 | 11 | SOCK_RAW |
| 0xd2000004 | 11 | SOCK_RDM |
| 0xd2000005 | 11 | SOCK_SEQPACKET |
| 0xd2000006 | 11 | Attempt to flush pending receive requests failed |
| 0xd2000007 | 11 | Abortive disconnect requested on endpoint |
| 0xd2000008 | 11 | Shutdown with SD_RECEIVE posted with receive data pending |
| 0xd2000009 | 11 | Transport indicated abortive disconnect |
| 0xd200000a | 11 | Error on accepted connection not associated with listening socket |
| 0xd200000b | 11 | Disconnect failed |
| 0xd200000c | 11 | Pending data on connection when disconnect called |
| 0xd200000d | 11 | Invalid buffer specified on fastio receive |
| 0xd200000e | 11 | Accept operation failed |
| 0xd200000f | 11 | Unable to allocate buffer |
| 0xd2000010 | 11 | Counter overflow |
| 0xd2000011 | 11 | Data arrives after shutting down receive path |
| 0xd2000012 | 11 | Data arrives during endpoint cleanup |
| 0xd2000013 | 11 | Receive request failed |
| 0xd2000014 | 11 | Send request failed |
| 0xd2000015 | 11 | Send request cancelled |
| 0xd2000016 | 11 | TransmitPackets/TransmitFile request cancelled |
| 0xd2000017 | 11 | Abort indicated during connection request |
| 0xd2000018 | 11 | Plug and play event caused abort |
| 0xd2000019 | 11 | Datagram source address does not match connected address |
| 0xd200001a | 11 | Insufficient local buffer space |
| 0xd200001b | 11 | Buffer allocation failed |
| 0xd200001c | 11 | Insufficient local buffer space - circular queueing enabled |
| 0xd200001d | 11 | Indicated datagram too large - integer overflow |
| 0xd200001e | 11 | SO_OOBINLINE |
| 0xd200001f | 11 | FIONBIO |
| 0xd2000020 | 11 | SO_RCVBUF |
| 0xd2000021 | 11 | SO_SNDBUF |
| 0xd2000022 | 11 | SIO_ENABLE_CIRCULAR_QUEUEING |
| 0xd2000023 | 11 | SIO_UDP_CONNRESET |
| 0xd2000024 | 11 | AFD_IPV6_V6ONLY |
| 0xd2000025 | 11 | SIO_UDP_NETRESET |
| 0xd2000026 | 11 | None |
| 0xd2000027 | 11 | Event |
| 0xd2000028 | 11 | IOCP |
| 0xd2000029 | 11 | source address |
| 0xd200002a | 11 | destination address |
| 0xd200002b | 11 | flags |
| 0xd200002c | 11 | control |
| 0xd200002d | 11 | send |
| 0xd200002e | 11 | receive |
| 358 entries | ||