SMART_INVALID_COMMAND

Code: 0x3 (3)

As HRESULT:

S: 0 (Success)
C: 0 (Microsoft-defined)
N: 0 (Not an NTSTATUS value)
Facility: 0x000 (FACILITY_NULL: Default)
Code: 0x0003 (3)

As NTSTATUS:

Sev: 0 (STATUS_SEVERITY_SUCCESS)
C: 0 (Microsoft-defined)
Facility: 0x000 (Default)
Code: 0x0003 (3)

Abstract

Invalid command byte

Associated Modules

Module	Code	Found in	Description
DevDispItemProvider.dll	0x3	8.11011	%1 - Left
ESENT.dll	0x3	8.11011	Logging/Recovery
EhStorTcgDrv.sys	0x3	1011	An operation has failed (%3, %4, %5, %6). %1 NTStatus: %2
EventCreate.exe	0x3	78.11011	%1
FXSEVENT.dll	0x3	1011	Inbound
KernelBase.dll	0x3	78.1	The system cannot find the path specified.
LocationNotifications.exe	0x3	8.1	Trigger event for Location Notifications.
NetTCPIP.dll	0x3	1011	Not all required properties are specified: either one of %1 %2 and either one of %3 %4
SMCCx.dll	0x3	1011	An operation has failed (%3, %4, %5, %6). %1 NTStatus: %2
ServiceModelEvents.dll	0x3	78.11011	ObjectAccess
UsbccidDriver.dll	0x3	1011	An operation has failed (%3, %4, %5, %6). %1 NTStatus: %2
VSSVC.exe	0x3	1011	Volume Shadow Copy Service initialization error: the COM library cannot be initialized [%1]. %2
WUDFUsbccidDriver.dll	0x3	1011	An operation has failed (%3, %4, %5, %6). %1 NTStatus: %2
WinSAT.exe	0x3	1011	The assessments or other operations completed successfully.
WudfSMCClassExt.dll	0x3	1011	An operation has failed (%3, %4, %5, %6). %1 NTStatus: %2
apphelp.dll	0x3	8.11011	The application (%3, from vendor %5) was detected containing legacy redistributable software.
bootstr.dll	0x3	10	Windows 10
bootstr.dll	0x3	11	Windows 11
cdosys.dll	0x3	78.11011	General
cmimcext.sys	0x3	1011	Initial Machine Configuration was unable to unload the IMC hive once processing was completed. The status was %1.
connect.dll	0x3	78.11011	Successfully connected to %1!s!
cscui.dll	0x3	1011	Network interface has been disconnected.
deviceaccess.dll	0x3	8.1	Task %1 canceled servicing of device %3 because: %2.
deviceregistration.dll	0x3	1011	Workplace Join discovery succeeded.
dimsjob.dll	0x3	78.11011	Certificate Services Client has detected network connectivity.
dskquota.dll	0x3	78.11011	Error %1 opening group policy registry key %2. %3.
dskquoui.dll	0x3	78.11011	Error %1 opening group policy registry key %2. %3.
dsreg.dll	0x3	1011	%1
dssec.dll	0x3	78.11011	Reset password
ehepgres.dll	0x3	7	%1
ehrecvr.exe	0x3	7	TV tuner encountered an error. (0x%2) %1
ehsched.exe	0x3	7	Successfully setup event logging.
findstr.exe	0x3	78.110	Searches for strings in files. FINDSTR [/B] [/E] [/L] [/R] [/S] [/I] [/X] [/V] [/N] [/M] [/O] [/P] [/F:file] [/C:string] [/G:file] [/D:dir list] [/A:color attributes] [/OFF[LINE]] strings [[drive:][path]filename[ ...]] /B Matches pattern if at the beginning of a line. /E Matches pattern if at the end of a line. /L Uses search strings literally. /R Uses search strings as regular expressions. /S Searches for matching files in the current directory and all subdirectories. /I Specifies that the search is not to be case-sensitive. /X Prints lines that match exactly. /V Prints only lines that do not contain a match. /N Prints the line number before each line that matches. /M Prints only the filename if a file contains a match. /O Prints character offset before each matching line. /P Skip files with non-printable characters. /OFF[LINE] Do not skip files with offline attribute set. /A:attr Specifies color attribute with two hex digits. See "color /?" /F:file Reads file list from the specified file(/ stands for console). /C:string Uses specified string as a literal search string. /G:file Gets search strings from the specified file(/ stands for console). /D:dir Search a semicolon delimited list of directories strings Text to be searched for. [drive:][path]filename Specifies a file or files to search. Use spaces to separate multiple search strings unless the argument is prefixed with /C. For example, 'FINDSTR "hello there" x.y' searches for "hello" or "there" in file x.y. 'FINDSTR /C:"hello there" x.y' searches for "hello there" in file x.y. Regular expression quick reference: . Wildcard: any character * Repeat: zero or more occurrences of previous character or class ^ Line position: beginning of line $ Line position: end of line [class] Character class: any one character in set [^class] Inverse class: any one character not in set [x-y] Range: any characters within the specified range \x Escape: literal use of metacharacter x \ Word position: end of word For full information on FINDSTR regular expressions refer to the online Command Reference.
findstr.exe	0x3	11	Searches for strings in files. FINDSTR [/B] [/E] [/L] [/R] [/S] [/I] [/X] [/V] [/N] [/M] [/O] [/P] [/F:file] [/C:string] [/G:file] [/D:dir list] [/A:color attributes] [/OFF[LINE]] strings [[drive:][path]filename[ ...]] /B Matches pattern if at the beginning of a line. /E Matches pattern if at the end of a line. /L Uses search strings literally. /R Uses search strings as regular expressions. /S Searches for matching files in the current directory and all subdirectories. /I Specifies that the search is not to be case-sensitive. /X Prints lines that match exactly. /V Prints only lines that do not contain a match. /N Prints the line number before each line that matches. /M Prints only the filename if a file contains a match. /O Prints character offset before each matching line. /P Skip files with non-printable characters. /OFF[LINE] Do not skip files with offline attribute set. /A:attr Specifies color attribute with two hex digits. See "color /?" /F:file Reads file list from the specified file(/ stands for console). /C:string Uses specified string as a literal search string. /G:file Gets search strings from the specified file(/ stands for console). /D:dir Search a semicolon delimited list of directories /Q:qflags Quiet mode flags: u Suppress warning about unsupported Unicode formats strings Text to be searched for. [drive:][path]filename Specifies a file or files to search. Use spaces to separate multiple search strings unless the argument is prefixed with /C. For example, 'FINDSTR "hello there" x.y' searches for "hello" or "there" in file x.y. 'FINDSTR /C:"hello there" x.y' searches for "hello there" in file x.y. Regular expression quick reference: . Wildcard: any character * Repeat: zero or more occurrences of previous character or class ^ Line position: beginning of line $ Line position: end of line [class] Character class: any one character in set [^class] Inverse class: any one character not in set [x-y] Range: any characters within the specified range \x Escape: literal use of metacharacter x \ Word position: end of word For full information on FINDSTR regular expressions refer to the online Command Reference.
finger.exe	0x3	78.1	poll failed
fltmgr.sys	0x3	1011	Filter Manager failed to attach to volume '%3'. This volume will be unavailable for filtering until a reboot. The final status was %1.
fontview.exe	0x3	78.11011	There is not enough free memory for this operation.
ftp.exe	0x3	78.1	poll failed
hostname.exe	0x3	78.1	poll failed
hvloader.dll	0x3	11	Hypervisor Eventlog for global system events could not be created!
hvservice.sys	0x3	10	Hypervisor Eventlog for global system events could not be created!
kernel32.dll	0x3	78.11011	The system cannot find the path specified.
microsoft-windows-hal-events.dll	0x3	1011	Initialization of the High Precision Event Timer failed due to an interrupt configuration problem. The operating system will use another available platform timer in lieu of the High Precision Event Timer. It may be possible to address this problem with an updated system BIOS. Contact your system vendor for technical assistance. Initialization status: %1.
microsoft-windows-kernel-processor-power-events.dll	0x3	1011	Throttle power management features on processor %1 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware.
mispace.dll	0x3	1011	Data and parity information are striped across physical disks, increasing reliability, but somewhat reducing capacity and performance. To protect against a single disk failure, use at least three disks; to protect against two disk failures, use at least seven disks.
mispace.dll	0x3	8.1	Data and parity information are striped across physical disks, increasing reliability, but somewhat reducing capacity. This storage layout requires at least three disks to protect you from a single disk failure and at least seven disks to protect you from two disk failures.
mountvol.exe	0x3	78.11011	path Specifies the existing NTFS directory where the mount point will reside. VolumeName Specifies the volume name that is the target of the mount point. /D Removes the volume mount point from the specified directory. /L Lists the mounted volume name for the specified directory. /P Removes the volume mount point from the specified directory, dismounts the volume, and makes the volume not mountable. You can make the volume mountable again by creating a volume mount point. /R Removes volume mount point directories and registry settings for volumes that are no longer in the system. /N Disables automatic mounting of new volumes. /E Re-enables automatic mounting of new volumes.
msaudite.dll	0x3	78.11011	Object Access
msprivs.dll	0x3	78.11011	Replace a process level token
msra.exe	0x3	78.11011	Application will terminate, a critical error was detected in %1 Line %2 Function %3
napipsec.dll	0x3	78.1	NAP IPSec Relying Party has added IPSec policy to the machine.
netcfg.exe	0x3	1011	Trying to uninstall %1 ...
netdacim.dll	0x3	8.11011	Disabling manual site selection for DirectAccess connectivity
netnccim.dll	0x3	8.11011	Disabling manual site selection for DirectAccess connectivity
netttcim.dll	0x3	8.11011	Disabling manual site selection for DirectAccess connectivity
nslookup.exe	0x3	78.11011	Non-authoritative answer:
ntdll.dll	0x3	78.11011	STATUS_WAIT_3
powershell.exe	0x3	78.11011	Version %1!ls! of the .NET Framework is not installed and it is required to run version %2!ls! of Windows PowerShell.
pwrshmsg.dll	0x3	78.11011	Provider Health
reagentc.exe	0x3	1011	Configures the Windows Recovery Environment (Windows RE) and system reset. %1 The following commands can be specified: /info - Displays Windows RE and system reset configuration information. /setreimage - Sets the location of the custom Windows RE image. /enable - Enables Windows RE. /disable - Disables Windows RE. /boottore - Configures the system to start Windows RE next time the system starts up. /setbootshelllink - Adds an entry to the Reset and Restore page in the boot menu. For more information about these commands and their arguments, type %1 /?. Examples: %1 /setreimage /? %1 /disable /?
reagentc.exe	0x3	7	Configures the Windows Recovery Environment (RE). %1 [options] where the following operations can be specified: /setreimage /path [/target ] [/bootkey ] Sets the location of the user-provided Windows RE image. The optional /target switch specifies the path to the location that contains the Windows installation. The optional /bootkey switch specifies the scan code for an OEM-specific launch button. /setosimage [/path [/target ]] [/customtool] /path sets the location of the user-provided OS Setup files. Alternatively /customtool specifies that a an imaging tool was specified inside Windows RE. /info [/target ] Displays Windows RE configuration information. The optional /target switch specifies the path to the location that contains the Windows installation. /enable Enable Windows RE for auto-failover and recovery. /disable Disable Windows RE auto-failover and recovery. /boottore Configure the BCD to launch Windows Recovery next time the system starts up.
reagentc.exe	0x3	8.1	Configures the Windows Recovery Environment (Windows RE) and system reset. %1 The following commands can be specified: /info - Displays Windows RE and system reset configuration information. /setreimage - Sets the location of the custom Windows RE image. /enable - Enables Windows RE. /disable - Disables Windows RE. /boottore - Configures the system to start Windows RE next time the system starts up. /setosimage - Sets the location of the recovery image used by system reset. /setbootshelllink - Adds an entry to the Reset and Restore page in the boot menu. For more information about these commands and their arguments, type %1 /?. Examples: %1 /setreimage /? %1 /disable /?
rekeywiz.exe	0x3	78.11011	Encrypting File System could not automatically select a certificate. Click on Select certificate to select one, or choose to create a new certificate.
sc.exe	0x3	1011	DESCRIPTION: Modifies a service entry in the registry and Service Database. USAGE: sc config [service name] ... OPTIONS: NOTE: The option name includes the equal sign. A space is required between the equal sign and the value. To remove the dependency, use a single / as dependency value. type= start= error= binPath= group= tag= depend= obj= DisplayName= password=
sc.exe	0x3	7	DESCRIPTION: Modifies a service entry in the registry and Service Database. USAGE: sc config [service name] ... OPTIONS: NOTE: The option name includes the equal sign. A space is required between the equal sign and the value. type= start= error= binPath= group= tag= depend= obj= DisplayName= password=
sc.exe	0x3	8.1	DESCRIPTION: Modifies a service entry in the registry and Service Database. USAGE: sc config [service name] ... OPTIONS: NOTE: The option name includes the equal sign. A space is required between the equal sign and the value. type= start= error= binPath= group= tag= depend= obj= DisplayName= password=
sstpsvc.dll	0x3	1011	CoId=%1:The HTTP response received from the server-side Secure Socket Tunneling Protocol (SSTP) either does not have the version information or the version is not supported. The HTTP version information received is logged in the data section below. The HTTP response from the SSTP server must contain the version header and the version must be 1.1.
storagewmi.dll	0x3	8.11011	The operation failed with return code %1!u!
tquery.dll	0x3	78.11011	Gatherer
w32time.dll	0x3	1011	The time provider '%1' logged the following message: %2
webservices.dll	0x3	78.11011	A type description may not be specified for WS_TYPE value '%1'.
wecutil.exe	0x3	78.11011	Failed to open config file: %1!s!.
wevtapi.dll	0x3	78.11011	Printers
wevtutil.exe	0x3	78.11011	Failed to initialize COM.
wfascim.dll	0x3	1011	At least one server or domain name must be specified.
whealogr.dll	0x3	71011	A hardware event has occurred. An informational record describing the condition is contained in the data section of this event.
winbio.dll	0x3	8.11011	Position your finger more to the right on the fingerprint reader.
winsrv.dll	0x3	78.11011	Windows
winsrvext.dll	0x3	11	Windows
xwizards.dll	0x3	78.11011	Usage: xwizard ProcessXMLFile [/u] [/m] where: /u = unattended (log parsing errors instead of showing them) /m = additionally generate Vista setup manifest file section (create resulting file in current directory as .man) filename = XML file name examples: xwizard ProcessXMLFile myconfig.xml xwizard ProcessXMLFile /m mysetup.xml
80 entries